13918218772

QQ:45837332

yongkan2001

網站首頁    SAS(美國)    美國SAS EOAT夾具自動化配件唯一總代理
驗證碼

美國SAS EOAT夾具自動化配件唯一總代理

LOGO-SASLOGO
  • 美國SAS EOAT夾具自動化配件唯一總代理

     

     

    LOGO-SASLOGO

     

     

    常用型號及價格檢索:

     


    SWM... Quick Change Mounting Chuck
    SWM… Schnellwechselsystem
    Greiferschnellwechselsysteme
    Quick change ChuCk SySteM
    Standard A B C D E F G (Tubing Size) H (Tubing Size) Air Coupling Air Plug GPM Plate Weight (g) Price
    SWM 0.1 27 35 40 10 19 ~ ~ ~ ~ ~ GPM 0.1 139 $204.56
    SWM 0 38 43 60 32 19 32 3 tubes, 4mm 2 tubes, 4mm 92-5002 94-4902 GPM 0 323 $258.75
    SWM 1 58 95 102 34 19 32 3 tubes, 4mm 2 tubes, 6mm 92-5002 94-4902 GPM 1 567 $336.75
    SWM 2 101 132 160 50 25 40 3 tubes, 6mm 2 tubes, 8mm 92-0204 94-0104 GPM 2 2024 $449.25
    SWM 3 152 192 250 58 32 40 3 tubes, 6mm 2 tubes, 8mm 92-0406 94-0306 GPM 3 4559 $599.25
    E-Type A B C D E F G (Tubing Size) H (Tubing Size) Air Coupling Air Plug GPM Plate Weight (g) Price
    SWM 0E 38 43 60 8 19 ~ ~ ~ ~ ~ GPM 0 284 $222.75
    SWM 1E 58 95 102 12 20 ~ ~ ~ ~ ~ GPM 1 455 $291.75
    SWM 2E 101 132 160 12 25 ~ ~ ~ ~ ~ GPM 2 1641 $411.75
    SWM 3E 152 192 250 14 32 ~ ~ ~ ~ ~ GPM 3 3680 $569.25
    ST-Type A B C D E F G (Tubing Size) H (Tubing Size) Air Coupling Air Plug GPM Plate Weight (g) Price
    SWM 1 - Steel 58 95 102 34 19 32 3 tubes, 4mm 2 tubes, 6mm 92-5002 94-4902 GPM 1 1049 $449.25
    SWM 2 - Steel 101 132 160 50 25 40 3 tubes, 6mm 2 tubes, 8mm 92-0204 94-0104 GPM 2 3623 $749.25
    SWM 3 - Steel 152 192 250 58 32 40 3 tubes, 6mm 2 tubes, 8mm 92-0406 94-0306 GPM 3 7938 $974.25
    LT-Type A B C D E F G (Tubing Size) H (Tubing Size) Air Coupling Air Plug GPM Plate Weight (g) Price
    SWM 0.1 LT 27 35 40 10 19 ~ ~ ~ ~ ~ GPM 0.1 74 $204.56
    SWM 0 LT 38 43 60 32 19 32 3 tubes, 4mm 2 tubes, 4mm 92-5002 94-4902 GPM 0 205 $258.75
    SWM 1 LT 58 95 102 34 19 32 3 tubes, 4mm 2 tubes, 6mm 92-5002 94-4902 GPM 1 390 $336.75
    SWM 2 LT 101 132 160 50 25 40 3 tubes, 6mm 2 tubes, 8mm 92-0204 94-0104 GPM 2 1200 $508.50
    + sas-automation.com | 19 QuiCk Change ChuCk SySteM
    • Available in standard or X-Type, as above, upon request
    • Low cost dove-tail mounting plate for grippers
    • Can be used with or without SWM Quick Change Chuck
    • Lightweight aluminum plates for standard applications
    L-Type
    • Pre-drilled with M4 threaded holes
    • Usually used with L-18/10 profile
    X-Type
    • Pre-set for mounting profile
    • X plates pre-drilled for 5mm cap screws and include 6
    screws, lock washers, and GWP 5X channel nuts
    ST-Type (Steel)
    • Recommended for use only with steel SWM plates
    • Use with steel SWM plates for heavy duty applications
    LT-Type (Light)
    • Can be used for light tools with any SWM plate of same size
    • Use with LT SWM plates for greatest weight reduction in light
    duty applications
    • Available in C & X styles as above on request
    T-Type (Tubing)
    • Used with tube style framework
    • Has tapped holes for KVB clamps
    GPM... Quick Change Mounting Plates
    GPM… Greifergrundplatte
    T Type
    Standard
    Quick change ChuCk SySteM
    Standard A B C SWM Chuck Weight (g) Material Price
    GPM 0.1 40 ~ 8 SWM 0.1 74 Aluminum $14.95
    GPM 0 60 35 8 SWM 0 74 Aluminum $13.25
    GPM 1 100 70 8 SWM 1 206 Aluminum $16.50
    GPM 2 160 120 10 SWM 2 578 Aluminum $25.25
    GPM 3 250 200 10 SWM 3 1595 Aluminum $39.50
    L-Type A B C SWM Chuck Weight (g) Material Price
    GPM 0 L 60 35 8 SWM 0 74 Aluminum $18.50
    GPM 1 L 100 70 8 SWM 1 206 Aluminum $22.75
    X-Type A B C SWM Chuck Weight (g) Material Price
    GPM 1 X 100 70 8 SWM 1 232 Aluminum $25.95
    GPM 2 X 160 120 10 SWM 2 669 Aluminum $44.25
    GPM 3 X 250 200 10 SWM 3 1643 Aluminum $59.25
    ST-Type A B C SWM Chuck Weight (g) Material Price
    GPM 1 ST 100 70 8 SWM 1 Steel 596 Steel $65.07
    GPM 2 ST 160 120 10 SWM 2 Steel 1815 Steel $75.00
    GPM 3 ST 250 200 10 SWM 3 Steel 4627 Steel $140.64
    LT-Type A B C SWM Chuck Weight (g) Material Price
    GPM 0.1 LT 40 ~ 8 SWM 0.1 LT 15 Delrin $14.95
    GPM 0 LT 60 35 8 SWM 0 LT 35 Delrin $13.25
    GPM 1 LT 100 70 8 SWM 1 LT 105 Delrin $22.94
    GPM 2 LT 160 120 10 SWM 2 LT 329 Delrin $52.23
    T-Type A B C SWM Chuck Weight (g) Material Price
    GPM 1-14 T 100 22 8 SWM 1 198 Aluminum $26.50
    GPM 2-14 T 160 22 10 SWM 2 560 Aluminum $46.50
    GPM 2-20 T 160 28 10 SWM 2 555 Aluminum $47.50
    GPM 3-20 T 250 28 10 SWM 3 1560 Aluminum $62.50
    GPM 3-30 T 250 38 10 SWM 3 1588 Aluminum $64.50
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    SWM...SA Semi-automatic Quick Change Mounting Chuck
    • All the benefits of SWM Quick Change Mounting Chuck
    • No need for hose clearance below the chuck
    • Automatically couples air and vacuum lines
    • Must be used with GPM SA mounting plates
    • Uses "S" style fittings (not included)
    SWM...SA halbautomatische Schnellwechselplatte
    GPM...SA Semi-automatic Quick Change Mounting Plates
    • Automatically couples air and vacuum lines
    • Prevents mixing up of air and vacuum lines during tool changes
    • Must be used with a SWM SA Quick Change Chuck
    GPM...SA Halbautomatische Greifergrundplatte
    1 - Rubber seals for pneumatic interface
    2 - Hand levers for changing EOATs without tools
    SWM...SA
    GPM...SA
    Quick change ChuCk SySteM
    A B C D E F G (Tubing Size) # of Ports GPM Plate Weight (g) Price
    SWM 1 SA 57 94 102 25 32 45 4/6mm 7 GPM 1 SA ~ $433.50
    SWM 2 SA 101 130 160 32 25 43 6 7 GPM 2 SA 1787 $546.00
    SWM 3 SA 150 180 250 32 25 43 6 10 GPM 3 SA ~ $674.25
    A B C D # of Ports SWM Chuck Weight (g) Price
    GPM 1 SA 100 70 19 M5 7 SWM 1 SA ~ $116.70
    GPM 2 SA 160 60 13 G 1/8" 7 SWM 2 SA ~ $135.00
    GPM 3 SA 250 100 13 G 1/8" 10 SWM 3 SA 2046 $165.00
    + sas-automation.com | 21
    GPG... Spring Loaded Quick Change Mounting Plates
    • Allows for a spring loaded compliance on
    our standard GPM mounting plate
    • Especially useful in high speed ejection
    strokes and safety releases
    GPG… Greifergrundplatte
    gefedert mit Kugelumlaufbuchsen
    QuiCk Change ChuCk SySteM
    Quick change ChuCk SySteM
    GHV... Rack for eOat Storage
    • Economical storage of EOAT when not in production
    • Accepts EOAT built on our standard GPM mounting
    plates as well as our GPG Spring Loaded and new GPM-
    SA Semi-Automatic mounting plates
    GHV… Greiferhaltevorrichtung
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    GHV… Robotergreifer Gestell
    • EOAT Storage Rack can be customized to fit your needs.
    • Uses GHV Wall Mounts on Heavy Duty Profile for stability.
    • Available, as shown, on heavy duty casters for mobility or
    fixed with L-shaped legs for storing against the wall
    • Multi EOAT storage capability
    GHV... Wall Mount
     A B C D E F G (Stroke) SWM Chuck Profile Weight (g) Price
    GPG 1 100 35 102 70 91 66 20 SWM 1 L/X 601 $295.00
    GPG 2 160 60 160 120 115 84 30 SWM 2 X 253 $213.52
    GPG 3 250 100 254 200 115 84 30 SWM 3 X 2268 $496.00
     A B C Storage For Profile Weight (g) Price
    GHV 0 80 63 10 All GPM 0 Plates L/X 95 $60.62
    GHV 1 120 76 10 All GPM 1 Plates L/X 147 $67.00
    GHV 2 180 102 10 All GPM 2 Plates X/JX/HX/D 297 $95.00
    GHV 3 270 152 13 All GPM 3 Plates X/JX/HX/D 817 $100.00
    16
    5.4
    22.5
    35
    27 27
    20
    16
    10
    60
    19
    49
    70.5
    114.1
    26
    16
    10
    60.6
    70 35
    30°
    25
    QSR 90-8
    QSR 150-10
    QSR 160-18
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    QSR... Semi-automatic tool Changer
    The SAS tool changer automatically connects multiple ports including air,
    vacuum, and electric, thereby, greatly reducing set-up time. Reliable port
    connection provides additional safety ensuring that all connections are
    aligned correctly.
    QSR… Halbautomatischer Greiferwechsler
    Features
    • Semi-Automatic Tool Changer for accurate, repeatable mounting of
    Robotic End-of-Arm Tooling.
    • Couples air and vacuum lines automatically (8/10/18).
    • Made of lightweight aluminum with durable steel lock ring
    • Handles typical end-of-arm tool weights up to 25/75/90 lbs
    Quick change ChuCk SySteM
    Weight (g) Price
    QSR 90-8 333 $320.00
    QSR 150-10 1114 $525.00
    QSR 160-18 1175 $600.00
    + sas-automation.com | 23
    16
    16
    4
    58
    56
    35
    35 50
    70.6
    114
    48.5
    18.5
    60
    16
    21 10
    30 74
    52
    85
    16
    21
    10
    65
    37 75
    30°
    QST 90-8
    QST 150-10
    QST 160-18
    QST... Semi-automatic tool Changer
    The SAS tool changer automatically connects multiple ports including air,
    vacuum, and electric, thereby, greatly reducing set-up time. Reliable port
    connection provides additional safety ensuring that all connections are
    aligned correctly.
    QST... Halbautomatischer Greiferwechsler
    • Semi-Automatic Tool Changer for accurate, repeatable mounting of
    Robotic End-of-Arm Tooling.
    • Couples air and vacuum lines automatically (8/10/18).
    • Made of lightweight aluminum with durable steel locators
    • Handles typical end-of-arm tool weights up to 25/75/90 lbs
    QuiCk Change ChuCk SySteM
    Quick change ChuCk SySteM
    Weight (g) Price
    QST 90-8 213 $185.00
    QST 150-10 816 $285.00
    QST 160-18 929 $375.00
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    TAD... tool alignment Device
    • Allows tools to shift for proper alignment
    with parts
    • Use with locator pins or bushings to align
    tools with molds or other machines
    • After aligned the compensator can be locked
    in place for proper part placement
    TAD… Werkzeugjustierungshilfe
    Quick change ChuCk SySteM
    QMP... Mounting Plate
    •Mounts profile straight up to the QST.
    •Different size plates to mount up to the different QST sizes.
    QCC...Schnellwechsel (Automatik)
    • Used in automatic robotic
    tool change application
    • Integrated pneumatic and
    electrical connections
    • Master plate and Tool plate
    sold separately
    • Includes electrical
    connectors
    QCC... hands Free Quick Change Chuck
    A B C D
    E
    (Tap)
    F
    (Slip Fit)
    Lateral
    Misalignment (mm)
    Rotary
    Misalignment
    Max Payload
    (kg)
    Payload @ 4.1
    Bar (kg)
    Torsion Resistance
    (N*m)
    Price
    TAD 0 76 30 23 33 #8-32 3/16" +/- 2.5 +/- 5 18.6 8.5 11.8 $772.06
    TAD 1 102 41 31 45 #10-32 1/4" +/- 2.5 +/- 5 33.6 15.3 30.7 $1075.00
    TAD 2 133 51 42 59 1/4-20 1/4" +/- 2.5 +/- 5 44.7 20.3 51.7 $1295.00
    TAD 3 203 88 65 92 5/16-18 3/8" +/- 2.5 +/- 5 99.2 45.1 157.6 $1995.00
    A B C Weight (g) Price
    QMP 1-90 100 70 15 ~ $47.50
    QMP 2-90 160 120 17 724 $43.66
    QMP 2-150-160 160 120 17 669 $64.66
    QMP 3-150-160 250 200 17 ~ $75.62
    Master Plate A B C D
    E
    (Electrical)
    F
    (Coupled)
    G (#)
    H
    (Bolt Circle)
    J K L M Payload Price
    QCC 0 5 18 19 33 10-Pin 49 M5 (6) 40 45 3.5 49 ~ 8kg $1,007.00
    QCC 1 3 16 13 45 10-Pin 39 M5 (6) 40 45 3.5 50 ~ 16kg $1,232.00
    QCC 2 3 19 14 60 19-Pin 45 M5 (12) 53 45 4.5 90 ~ 25kg $1,553.00
    QCC 3 3 27 18 80 19-Pin 57 1/8NPT (8) 65 30 5.5 115 ~ 50kg $1,670.00
    Tool Plate A B C D
    E
    (Electrical)
    F
    (Coupled)
    G (#)
    H
    (Bolt Circle)
    J K L M Payload Price
    QCT 0 ~ 26 ~ ~ 10-Pin 49 M5 (6) 40 45 ~ 49 M5 x .8 8kg $422.00
    QCT 1 ~ 21 ~ ~ 10-Pin 39 M5 (6) 40 45 ~ 50 M5 x .8 16kg $445.00
    QCT 2 ~ 24 ~ ~ 19-Pin 45 M5 (12) 63 45 ~ 90 M6 x 1 25kg $545.00
    QCT 3 ~ 27 ~ ~ 19-Pin 57 1/8NPT (8) 80 30 ~ 115 M8 x 1.25 50kg $613.00
    + sas-automation.com | 25
    TCS... Collision Sensors
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    TCS... Kollisionssensoren
    • Detects when the robot arm has
    encountered an obstruction
    • Absorbs the crash energy
    • Stops the robot to prevent costly
    damage to the robot arm and tooling
    • Features a repeatability of 0.0005"
    and allows the user to adjust the
    amount of resistance the unit must
    overcome before stopping the
    system
    QCI... Quick Change interface
    QCI… Kupplungsstück
    • Quick change interface for boom mounting D-Profile
    • Allows for end or boom mounting commonly utilized with 5 or 6 axis robots
    QuiCk Change ChuCk SySteM
    Quick change ChuCk SySteM
    A B (C'bore) C D E F G J K L M (Slip Fit) N O P Q R Price
    TCS-0 86 M4 48 36 15 31 52 M5 37 77 4 45 4x90 22 44 120 $1,095.00
    TCS-1 114 M5 63 48 19 40 64 M6 50 103 6 45 4x90 21 42 120 $1,275.00
    TCS-2 150 M6 85 64 25 51 79 M6 63 137 6 60 6x60 21 42 120 $1,625.00
    TCS-3 203 M8 117 86 33 71 105 M10 90 184 10 45 4x90 21 42 120 $2,045.00
    TCS-4 278 M10 163 120 46 99 143 M10 125 257 10 60 6x60 21 42 120 $2,995.00
    A B C D E F G Profile Price
    QCI 30 T 14/9 127 ~ ~ 100 60 100 T-30 $175.00
    QCI 75/50 D 14/9 140 25 32 100 60 118 D $350.00
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    Quick change ChuCk SySteM
    • Robust aluminum weldment.
    • Machinable face making it adaptable to fit any robot.
    RSM... Robot Standoff Mount
    A B C D E F Price
    RSM 1-75 127 94 75 105 B.C. 8.5 8 $485.75
    RSM 1-150 127 169 150 105 B.C. 8.5 8 $502.50
    RSM 2-150 165 176 150 140 B.C. 10.5 10 $519.25
    RSM 2-250 165 276 250 140 B.C. 10.5 10 $536.00
    RSM 3-150 203 176 150 175 B.C. 12.5 10 $552.00
    RSM 3-250 203 276 250 175 B.C. 12.5 10 $569.50
    + sas-automation.com | 27
    B
    A
    E
    ØD
    ØC
    ØD
    2-Plcs
    B
    A
    B
    A
    L-18/18 L-18/10
    ØD
    5-PLCS
    ØD
    6-Plcs
    X-50/25
    B
    B
    A
    X-25/25
    B
    A
    B
    A
    C
    45°
    ØD
    6-Plcs
    D-50/38
    ØD
    4-Plcs
    A
    B
    JX-40/40 JX-80/40
    A
    B
    ØD
    4-Plcs
    E
    E
    E
    E
    E
    E
    9
    71
    9
    M5 Fittings Only
    M5 Fittings Only
    M5 or 1/8"
    Fittings Only
    25
    ØD
    4-Plcs
    ØD
    4-Plcs
    B
    A
    ØD
    ØC
    E
    HX-60 HD
    HX-60
    L, X, D, JX & HX... Aluminiumprofile
    L, X, D, JX & HX...
    • Use with GWP Channel Nuts and PL-X
    Channel Nut profile
    L, X, D, JX & HX Profile... Aluminum Profiles
    Frame Profiles
    Rahmenprofile
    Example of Use
    Note: Additional freight charges may apply due to dimensional weight surcharges from carriers.
    FRAME PROFILES
    A B C D E Length Channel Nut Weight (g) Price
    L-18/10 10 18 ~ ~ 6.1 2000 PL-X 480 $11.60
    L-18/18 18 18 ~ 4.2 6.1 2000 PL-X 700 $18.20
    X-25/25 25 25 ~ 4.2 6.1 2000 PL-X 1207 $17.00
    X-50/25 50 25 ~ 4.2 6.1 2000 PL-X 2060 $30.00
    D-50/38 50 38 17.7 4.2 6.1 2000 PL-X 2792 $45.00
    JX-40/40 40 40 ~ 4.2 6.1 2000 PL-X 2959 $31.00
    JX-80/40 80 40 ~ 4.2 6.1 2000 PL-X 4710 $50.00
    HX-40 36 36 40 6.8 6.1 2000 PL-X 2395 $35.78
    HX-60 54 54 60 6.8 6.1 2000 PL-X 3685 $54.34
    HX-60 HD 54 54 60 6.8 6.1 2000 PL-X 7780 $67.50
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    T… Rundprofile
    • Highly adjustable, lightweight profile
    • For use with SAS's uniquely designed single piece Mounting Clamps
    T Profile... Tube Profile
    Frame Profiles
    GWP... Channel Nuts
    • Used for replacements or for profile mounting of custom plates or brackets
    • Available in 2m lengths of blank extrusion (non-plated) for custom
    applications
    • Nuts can be easily dropped in the channel of JX Profile
    GWP... Nutensteine
    *Drop-in Channel Nut
     OD ID Length Weight (g) Material Price
    T-14/11 14 11 1000 325 Aluminum $26.00
    T-20/16 20 16 1000 625 Aluminum $26.00
    T-20/10 20 10 2000 1280 Aluminum $32.00
    T-30/25 30 25 2000 1170 Aluminum $60.00
    T-30/20 30 20 2000 2120 Aluminum $75.00
     A L Material
    Weight
    (g)
    Price
    GWP 4 M4 ~ Steel 6 $1.10
    GWP 4-8 M4 8 Steel 5 $1.29
    GWP 4-17 M4 17 Steel 9 $1.29
    GWP 4-31 M4 31 Steel 16 $1.29
    GWP 5 M5 ~ Steel 5 $1.42
    GWP 5/45 * M5 ~ Steel 3 $1.60
    GWP 5-10 M5 10 Steel 7 $1.70
    GWP 5-12 M5 12 Steel 9 $1.29
    GWP 5-14 M5 14 Steel 9 $1.29
    GWP 5-16 M5 16 Steel 9 $1.70
    GWP 5-22 M5 22 Steel 12 $1.62
    GWP 5-25 M5 25 Steel 14 $1.29
    GWP 5-28 M5 28 Steel 15 $1.70
    GWP 5-38 M5 38 Steel 19 $1.70
    GWP 5-42 M5 42 Steel 21 $1.70
    GWP 5-58 M5 58 Steel 27 $1.70
    GWP 5-63 M5 63 Steel 30 $1.70
    GWP 6 M6 ~ Steel 5 $1.50
    GWP 6-12 M6 12 Steel 9 $1.80
    GWP 6-15 M6 15 Steel 9 $1.80
    GWP 6-20 M6 20 Steel 11 $1.80
    GWP 6-25 M6 25 Steel 13 $1.80
    GWP 6-30 M6 30 Steel 15 $1.80
    GWP 6-40 M6 40 Steel 19 $1.80
    GWP 6-50 M6 50 Steel 23 $1.80
    GWP 6-52 M6 52 Steel 24 $1.80
    GWP 6-60 M6 60 Steel 28 $1.80
    GWP 6-92 M6 92 Steel 40 $1.90
    Length Profile Material
    Weight
    (g)
    Price
    PL-X 2000 L, X, D, JX, HX Steel 810 $11.00
    Recommended Torque: (approx.)
    Fastener Nm Ft.-lbs.
    M4 3 2
    M5 5.5 4
    M6 9.5 7
    M8 23 17
    *Drop-in Channel Nut
    + sas-automation.com | 29
    ADK... Profile end Caps
    ADK… Abdeckkappen
    • Dresses & protects profile ends
    • Available in molded safety yellow or black colors
    SEC... sealed Profile end Caps
    • Soft industrial rubber bonded to an aluminum backing plate
    • Seals profile cavities to create internal air ducts
    • For use with D and JX Profile
    SEC… Abdichtende Abdeckkappen
    CTM… Kabel- und Schlauchverbindung
    CTM... Cable and Hose Connection
    • Convenient wiring and tubing tie-down twists tightly into
    standard frame profile
    • Easily moveable and removeable
    • CTM-15 designed to fit into L, X, & D profiles
    • CTM-25 designed to fit into JX & HX profiles
    *Above End Caps are black. To specify yellow End Caps, add "Y" After
    the profle size. (ex. ADK 18/10Y L)
    FRAME PROFILES
    Frame Profiles
    Note: Sold in packs of 10.
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    A B C Color Weight (g) Price
    ADK 18/10 L 18 10 4 Black/Yellow 1 $0.89
    ADK 18/18 L 18 18 4 Black/Yellow 2 $0.89
    ADK 25/25 X 25 25 4 Black/Yellow 2 $0.89
    ADK 50/25 X 50 25 4 Black/Yellow 3 $1.49
    ADK 50/38 D 50 38 2 Black/Yellow 9 $1.95
    A B C Color Weight (g) Price
    ADK 14Y T ø 16 ~ 18 Yellow 2 $0.89
    ADK 20Y T ø 22 ~ 18 Yellow 2 $0.89
    ADK 30Y T ø 32 ~ 18 Yellow 5 $0.89
    ADK 40 HX 42 ~ 18 Yellow 7 $1.80
    ADK 40/40 JX 40 40 4 Black 5 $1.49
    ADK 40/40 Y JX 40 40 4 Yellow 9 $1.49
    ADK 60 HX 62 ~ 26 Yellow 14 $2.20
    ADK 80/40 JX 80 80 4 Black 9 $1.49
    ADK 80/40 Y JX 80 80 4 Yellow 9 $1.49
    A B C Weight (g) Price
    CTM-15 12 15 16 11 $14.00
    CTM-25 18 25 16 21 $16.00
    A B C D Weight (g) Price
    SEC 50/38 D 50 38 6 M5 35 $19.75
    SEC 40/40 JX 40 40 6 M8 34 $18.75
    SEC 80/40 JX 80 40 6 M8 62 $21.75
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    KBV... Cross Joint Connector
    KPL... Cross Joint Connector
    WIV... Angle Joint Connector
    • Corner bracket for squareness and stability
    • Fits in corner of 2 joining frame profiles and does not
    interfere with parts in other channels
    KPL… Kreuzplatte
    KBV… Kreuzverbindung
    WIV… Winkelverbinder
    • Bridge style clamp for frame profile cross
    mounting
    • Allows full adjustability in two dimensions
    simultaneously
    • Sandwich style bracket used for profile cross mounting
    • Allows for full adjustability in 2 dimensions individually
    or simultaneously
    PROFILVERBINDER
    Frame CoNNeCTors
    A B C D Profile Weight (g) Price
    KBV 10-18 L 10 18 16 40 L-18/10 to L/X 40 $15.20
    KBV 18-18 L 18 18 25 40 L-18/18 to L/X 52 $16.20
    KBV 25-25 X 25 25 30 51 X-25/25 to X/D/HX 74 $16.75
    KBV 25-50 X 25 50 30 76 X-50/25 to X/D/HX 92 $18.00
    KBV 50-25 X 50 25 60 51 X-50/25 to X/D/HX 119 $18.50
    KBV 40-40 JX 40 40 56 66 JX-40/40 to X/JX/D/HX 161 $20.25
    KBV 40-80 JX 40 80 56 106 JX-80/40 to X/JX/D/HX 209 $22.25
    KBV 80-40 JX 80 40 97 76 JX-80/40 to X/JX/D/HX 298 $22.75
    A B Profile Weight (g) Price
    KPL 18-18 L 18 18 L to L-18/18 52 $20.30
    KPL 25-25 X 25 25 X to X 68 $23.25
    KPL 25-50 X 50 25 X-50/25 to X 118 $25.75
    KPL 50-50 X 50 50 X-50/25 to X-50/25 189 $28.75
    KPL 40-40 JX 40 40 JX to JX 143 $25.75
    KPL 80-40 JX 80 40 JX-80/40 to JX ~ $29.60
    KPL 80-80 JX 80 80 JX-80/40 to JX-80/40 281 $29.25
     A B C Profile Weight (g) Price
    WIV 25 X 25 ~ 16 X/D 28 $9.95
    WIV 50 X 51 20 16 X/D 72 $16.88
    WIV 40 JX 38 ~ 25 JX 65 $10.25
    WIV 80 JX 76 40 25 JX 213 $26.85
    + sas-automation.com | 31
    EVB... Corner Joint Plate
    • Corner plate bracket for squareness and stability
    • Joins two profiles at either a 90° or 100° fixed angle
    • Forms a rigid connection
    EVB… Eckverbinder
    DKA... Profile extension Arm
    • Offsets profile connections using clamps
    • Allows for clearance between profile
    DKA… Einstellbarer Profilverbindungsarm
    EPL... end Plate
    EPL… Endplatte
    • Connects frame profile ends for added
    stability and strength
    FRAME CONNECTORS
    Frame CoNNeCTors
     A B C D Profile Weight (g) Price
    EVB 25 X 100 75 25 5.5 X-25 147 $15.50
    EVB 50 X 100 100 50 5.5 X-50 212 $17.75
    EVB 40 JX 100 100 40 6.5 JX-40 201 $17.75
     A B C D E Weight (g) Price
    DKA 10 L 10 38 94 22 18 32 $20.00
    DKA 14 X 14 51 128 32 25 68 $24.75
    DKA 20 X 20 51 158 32 25 99 $21.75
    A B C D Mounting Plate Profile Weight (g) Price
    EPL 2-25 X 18 18 5.5 120 GPM 2 X/ GPM 2 SA /GPG 2 X-25/25 95 $5.57
    EPL 2-50 X ~ 25 5.5 120 GPM 2 X/ GPM 2 SA /GPG 2 X-50/25 156 $11.64
    EPL 3-25 X 18 18 5.5 200 GPM 2 X/ GPM 2 SA /GPG 2 X-25/25 15 $6.19
    EPL 3-50 X ~ 25 5.5 200 GPM 3 X/ GPM 3 SA /GPG 3 X-50/25 218 $7.75
    EPL 3-40 JX ~ ~ 8.5 200 GPM 3 X JX-40/40 218 $9.20
    EPL 3-80 JX ~ 40 8.5 200 GPM 3 X JX-80/40 445 $11.83
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    EVG... straight Connector Plate
    • Profile is connected end to end
    • Can be used to brace L connectors on wide profile
    • Forms a rigid connection
    EVG… Eckverbinder (Gerade)
    EVL... Connector Plate
    • Profile is connected perpendicular
    • Forms a rigid connection
    EVL… Eckverbinder (L-Form)
    EVG…
    EVL…
    EVW 45... 45 Degree Connector Plate
    • Joins two profiles at a 45° angle
    • Forms a rigid connection
    EVW… Eckverbinder (45 Grad)
    EVW…
    Frame CoNNeCTors
     A B C D E F G H
    Weight
    (g)
    Price
    EVG 25/50 X 50 ~ ~ 38 13 25 13 5.5 44 $9.85
    EVG 25/75 X 75 ~ 63 38 13 25 13 5.5 62 $11.75
    EVG 25/100 X 100 88 63 38 13 25 13 5.5 88 $12.50
    EVG 40/160 JX 160 140 100 60 20 40 20 6.5 186 $18.45
    A B C D E F G H Weight (g) Price
    EVL 50/50 X 50 ~ 38 13 50 38 13 5.5 90 $10.95
    EVL 50/75 X 75 63 38 13 50 38 13 5.5 87 $13.90
    EVL 80/120 JX 120 100 60 20 80 60 20 6.5 182 $17.07
    A B C D E F G
    Weight
    (g)
    Price
    EVW 45 X 50 38 13 77 38 13 5.5 95 $16.45
    EVW 45 JX 80 60 20 118 53 13 6.5 188 $18.50
    + sas-automation.com | 33
    EVT... T Connector Plate
    • Profile is connected perpendicular
    • Forms a rigid connection
    EVW 0-90... 0-90 Degree Connector Plate
    • Joins two profiles at any angle between 0 and 90°
    • Angle of profile intersection can be adjusted at any time
    • Forms a rigid connection
    EVW… Eckverbinder (0-90 Grad verstellbar)
    EVT… Eckverbinder (T-Form)
    EVW…
    EVT…
    EVD... straight Connector Plate
    • Straight plates for side-by-side
    and end-to-end connections of
    profile
    • Forms a rigid connection
    EVD… Eckverbinder Doppelt (Gerade)
    FRAME CONNECTORS
    Frame CoNNeCTors
    A B C D E F G H
    Weight
    (g)
    Price
    EVW 0-90 X 50 38 13 80 68 38 13 5.5 109 $16.45
    EVW 0-90 JX 80 60 20 130 110 60 20 6.5 255 $18.50
    A B C D E F x (#Holes) G H J
    Weight
    (g)
    Price
    EVT 50/75 X 50 13 25 25 X 2 13 25 X 2 13 75 5.5 88 $13.90
    EVT 100/75 X 100 38 25 25 X 2 13 25 X 4 13 75 5.5 135 $19.30
    EVT 100/80 D 100 38 25 25 X 2 10 25 X 4 13 80 5.5 135 $19.50
    EVT 100/130 D 100 38 25 25 X 3 10 25 X 4 13 130 5.5 178 $20.50
    EVT 120/120 JX 120 40 40 40 20 40 X 3 20 120 6.5 219 $21.25
    A B C D E F G H
    Weight
    (g)
    Price
    EVD 50/50 X 50 37.5 12.5 ~ ~ 25 50 5.5 88 $17.00
    EVD 50/100 X 100 87.5 62.5 37.5 12.5 25 50 5.5 178 $22.75
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    EVC... Cross Connector
    EVH... Cross Connector
    • Profile is connected perpendicular
    • Forms a rigid connection
    • For use with HX profile
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    EVC… Kreuzverbinder
    EVH… Kreuzverbinder
    • Profile is connected perpendicular
    • Forms a rigid connection
    • For use with HX profile
    Frame CoNNeCTors
    A B C D ØE Weight (g) Price
    EVC 40/40 18 56 116 130 6.5 205 $14.34
    EVC 60/60 26 66 166 190 6.5 365 $15.27
    A B C D E F G H ØJ Weight (g) Price
    EVH 60/40-1 15 29 66.8 82.8 30 103 27.2 38.9 6.6 301 $28.14
    EVH 60/40-2 54 100 160 180 8.6 42.8 66.8 82.8 7 561 $50.10
    + sas-automation.com | 35
    KV... Cross Connector
    • Low cost stable cross connector for joining
    two similar profiles
    • Will not interfere with components on either
    profile
    • Includes cap screw, serrated lock washer,
    channel nut with through hole
    • Drilling of one profile is required with our
    STB step drill  
    SV... Butt Connector
    • Low cost stable prependicular end-butt connector for joining two profiles
    • Will not interfere with components on either profile
    • Includes cap screw, serrated lock washer, and channel nut with through hole
    • Drilling of one profile required using our STB step drill and tapping the end of
    the profile
    KV… Kreuverbinder
    SV… Stoßverbindung
    STB... step Drill
    • Used for step drilling of aluminum profiles
    • One drill setup for installing KV or SV connectors
    STB… Stufenbohrer
    PJ... Profile Jigs
    • Easily locate holes for SV & KV profile connectors
    • Eliminates drill “walking” to assure square
    connections
    PJ… Spannvorrichtung
    FRAME CONNECTORS
    Frame CoNNeCTors
    A B C D E Profile Weight (g) Price
    KV-L M4 ULP 4X GWP 4 8 M4 L 16 $5.43
    KV-X M5 ULP 5X GWP 5 Ø10 (STB M5) M5 X 14 $4.68
    KV-JX M6 ULP 6X GWP 6 15 M6 JX 15 $3.25
    A B D E Profile Weight (g) Price
    SV-X M5 SHCS ULP 5X Ø10 (STB M5) M5 X 9 $1.85
     A (Drill) B (C'Bore) Profile Weight (g) Price
    STB M5 5.5 10 X 47 $38.07
    STB M6 6.5 11 JX ~ $54.40
    A B C D E F Profile Weight (g) Price
    PJ-X 10 12.5 25 25 13 54 X 75 $39.00
    PJ-JX 11 20 40 32 13 80 JX 144 $44.00
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    KPC... Tube Parallel Clamp
    • Parallel profile clamp for new Tube (T) profile
    • One piece construction for easy assembly
    KNC... Tube Cross Clamp
    • Adjustable angle cross connection of new
    Tube(T) profile
    • One piece construction for easy assembly
    KNC… Verbinder für Rundrohr
    KPC… Parallelrohrklemme
    KAC... Tube Angle swivel Clamp
    • Adjustable angle cross connection for new Tube ( T) profile
    • One piece construction for easy assembly
    KAC... Verbinder für Rundrohr
    Frame CoNNeCTors
    KAC...
    A B C D Weight (g) Price
    KPC 10 10 14 38 16 14 $17.00
    KPC 14 14 20 52 19 35 $18.00
    KPC 20 20 26 64 25 48 $19.00
    KPC 30 30 39 90 38 ~ $21.00
    A B C D Weight (g) Price
    KNC 10 10 14 38 16 ~ $18.00
    KNC 14 14 20 52 19 40 $19.50
    KNC 20 20 26 64 25 70 $21.00
    KNC 30 30 39 90 38 215 $23.00
    A B C D Weight (g) Price
    KAC 14-14 14 55 48 25 153 $18.00
    KAC 20-20 20 55 48 25 131 $21.00
    KAC 30-30 30 77 64 38 342 $29.09
    + sas-automation.com | 37
    KEC... Tube Cross swivel Clamp
    • Swivel cross connection for new Tube (T) profile
    • One piece construction for easy assembly
    KIC... Tube Parallel swivel Clamp
    • Parallel connector for new Tube (T) profile
    • One piece construction for easy assembly
    KEC… Rohrklemme gekreuzt schwenkbar
    KIC… Rohrklemme parallel schwenkbar
    FRAME CONNECTORS
    Frame CoNNeCTors
    A B C D E Weight (g) Price
    KEC 14-14 14 55 48 25 14 155 $18.00
    KEC 14-20 14 55 48 25 20 146 $20.00
    KEC 20-20 20 55 48 25 20 132 $29.87
    KEC 20-30 20 77 64 38 30 ~ $40.27
    KEC 30-30 30 77 64 38 30 ~ $30.45
    A B C D E Weight (g) Price
    KIC 14-14 14 55 48 25 14 155 $18.00
    KIC 14-20 14 55 48 25 20 144 $20.00
    KIC 20-20 20 55 48 25 20 131 $25.00
    KIC 20-30 20 77 64 38 30 370 $35.31
    KIC 30-30 30 77 64 38 30 327 $28.00
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    KVB... Cross Clamp
    KVB… Kreuzverbinder
    • Supplies 90° mounting with rotation
    • Short shaft clamp
    SKS... Insert Clamp
    SKS… Steckklemmstück
    WSL... Long Angle Clamp
    • Allows for top mounting of gripper arms and holders to frame
    profile
    • Adjustable parallel and perpendicular to the frame
    • Nylon-titanium composite clamps are less expensive and lighter
    weight
    • Aluminum clamps are more rigid for instances where precise
    locating is needed such as GRF gripper fingers and ASZ cutters
    • Hex head screws available upon request
    WSL… Winkelklemmstück
    KLEMMSTÜCKE
    • Allows for side mounting of gripper arms to
    frame profiles
    • Allows for mounting of new Tube (T) profiles to
    standard frame profiles
    MOUNTING CLAMPS
    A B C D Recommended Profile Weight (g) Price
    KVB 10 10 8 25 16 L/X/D/HX 21 $10.00
    KVB 14 14 10 34 19 L/X/JX/D/HX 36 $14.75
    KVB 20 20 18 40 25 X/JX/D/HX 51 $14.50
    KVB 30 30 18 50.8 38 X/JX/D/HX 94 $18.50
    A B C D E Weight (g) Price
    SKS 20 20 20 25 63 30 54 $22.75
    SKS 20-30 30 20 38 78 34 81 $27.50
    Nylon Titanium A B C D E G H Profile Weight (g) Price
    WSL 10 NT 10 82 45 16 18 10 10 L/X/JX/HX/D 28 $13.95
    WSL 14 NT 14 100 57 21 27 10 13 L/X/JX/HX/D 54 $17.10
    WSL 20 NT 20 119 66 24 27 12 16 X/JX/HX/D 67 $17.55
    WSL 30 NT 30 132 66 30 39 15 19 X/JX/HX/D 112 $19.35
    WSL 20 JX NT 20 135 70 34 32 16 16 X/JX/HX/D 99 $19.35
    WSL 30 JX NT 30 141 60 39 45 19 19 X/JX/HX/D 170 $20.92

    Aluminum A B C D E G H Profile Weight (g) Price
    WSL 10 AL 10 80 47 14 16 6 10 L/X/JX/HX/D 29 $15.50
    WSL 14 AL 14 100 62 16 22 8 13 L/X/JX/HX/D 55 $19.00
    WSL 20 AL 20 115 70 19 25 8 16 X/JX/HX/D 74 $19.50
    WSL 30 AL 30 129 67 28 38 10 19 X/JX/HX/D 150 $21.50
    WSL 20 JX AL 20 132 74 30 32 16 16 X/JX/HX/D 150 $21.50
    WSL 30 JX AL 30 137 64 35 45 19 19 X/JX/HX/D 281 $23.25
    + sas-automation.com | 39 MOUNTING CLAMPS
    WSL…T Top Long Angle Clamp
    • Allows for top mounting of gripper arms or holders
    to frame profile
    • Adjustable parallel and perpendicular to the frame
    • Screw head points out from profile so clamps can
    be mounted close together
    • Allows for close mounting of clamps.
    WSL...T Winkelklemmstück (mit Kopfschraube)
    WSL...T
    WSL...TR
    WSL...TRB
    WSL…TR Top Reversible Long Angle Clamp
    • Allows for top mounting of gripper arms or holders to frame
    profile
    • Adjustable parallel and perpendicular to the frame
    • Allows for close mounting of clamps.
    • Flexible mounting allows an adjustment range of 180.
    WSL...TR Drehbares Winkelklemmstück
    (mit Kopfschraube)
    WSL…TRB Long Angle Clamp
    • Allows for top or bottom mounting of gripper arms or
    holders to frame profile
    • Adjustable parallel and perpendicular to the frame
    • Thick aluminum clamps are more rigid for use with
    extremely heavy parts and MR cutters
    • Allows for close mounting of clamps.
    WSL...TRB Drehbares Winkelklemmstück (mit Kopfschraube)
    MOUNTING CLAMPS
    • Allows for top mounting of gripper arms and holders to frame profile
    • Adjustable parallel and perpendicular to the frame
    • Clamps offers a swivel mounting
    WSL…SH Angle Clamp
    Aluminum A B C D E F G H Profile Weight (g) Price
    WSL 10 TR 10 80 42 20 17 22 6 10 L/X/JX/HX/D 30 $17.00
    WSL 14 TR 14 100 60 20 20 25 7 13 L/X/JX/HX/D 47 $20.50
    WSL 20 TR 20 115 73 21 26 32 8 16 X/JX/HX/D 76 $20.50
    WSL 30 TR 30 130 74 31 37 45 10 19 X/JX/HX/D 137 $24.00
    Aluminum A B C D E F G Profile Weight (g) Price
    WSL 10 TRB 10 80 47 14 17 22 10 L/X/JX/HX/D 35 $16.50
    WSL 14 TRB 14 100 64 16 20 25 13 L/X/JX/HX/D 59 $20.00
    WSL 20 TRB 20 115 75 19 26 32 16 X/JX/HX/D 110 $20.50
    WSL 30 TRB 30 130 77 28 37 45 19 X/JX/HX/D 205 $23.87
    Aluminum A B C D E F G H Profile Weight (g) Price
    WSL 10 T 10 80 47 14 17 22 6 10 L/X/JX/HX/D 30 $16.50
    WSL 14 T 14 100 64 16 20 25 8 13 L/X/JX/HX/D 49 $20.00
    WSL 20 T 20 115 75 19 26 32 8 16 X/JX/HX/D 76 $20.50
    WSL 30 T 30 130 77 28 37 45 10 19 X/JX/HX/D ~ $21.69
    Aluminum A B C D E F Weight (g) Price
    WSL SH 10 10 90 45 26 16 10 39 $31.50
    WSL SH 14 14 114 60 31.5 23 13 80 $34.20
    WSL SH 20 20 135 70 39 26 16 123 $36.45
    WSL SH 30 30 153 70 49 39 19 250 $38.70
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    WSA... Long Angle Clamp
    • Mounts components and extension arms at a 30° angle to profile
    surface
    • Adjustable parallel and perpendicular to frame profile
    WSA… Winkelklemmstück 30º
    WST…TR Reversible Top Angle Clamp
    • Allows for top mounting of gripper arms or holders to frame profile
    • Adjustable along the channel of the frame profile
    • Allows for close mounting of clamps
    • Reverse mounting offers 180° adjustability
    WST...TR Winkelklemmstück verstellbar
    WST... Angle Clamp
    • Allows for top mounting of gripper arms or holders to
    frame profile
    • Adjustable along the channel of the frame profile
    • Hex head screws available upon request
    WST… Winkelklemmstück
    WST...TR
    MOUNTING CLAMPS
    Aluminum A B C D E Profile Weight (g) Price
    WSA 10 10 65 16 19 10 X/JX/HX/D 34 $21.50
    WSA 14 14 80 25 25 10 X/JX/HX/D 94 $21.50
    WSA 20 20 90 25 30 16 X/JX/HX/D 94 $22.50
    WSA 30 30 113 38 40 19 X/JX/HX/D 198 $24.50
    A B C D E F G Profile
    Weight
    (g)
    Price
    WST 10 L-TR 10 22 20 41 10 19 18 L 23 $11.61
    WST 10 X-TR 10 22 24 48 10 19 25 X 28 $17.50
    WST 14 X-TR 14 25 25 52 16 25 25 X 40 $13.25
    WST 20 X-TR 20 32 28 57 16 25 25 X 58 $13.75
    WST 30 X-TR 30 45 39 68 19 28 25 X 119 $16.75
    WST 20 JX-TR 20 32 35 80 16 20 40 JX 98 $16.75
    WST 30 JX-TR 30 45 39 85 19 28 40 JX 126 $19.25
    A B C D E F G Profile
    Weight
    (g)
    Price
    WST 10 L 10 16 16 40 10 14 18 L 21 $10.50
    WST 10 X 10 16 20 47 10 14 25 X 22 $10.63
    WST 14 X 14 25 21 52 13 19 25 X 41 $13.25
    WST 20 X 20 25 24 60 16 22 25 X 56 $13.75
    WST 30 X 30 38 30 73 19 25 25 X 104 $16.75
    WST 20 JX 20 32 34 77 16 23 40 JX 88 $16.75
    WST 30 JX 30 45 39 92 19 26 40 JX 126 $19.25
    + sas-automation.com | 41
    WSS... Angle Connector
    • Allows for low profile height by mounting vacuum cups
    directly to the frame profile
    • Adjustable along the channel of the frame profile
    • Extra port can connect vacuum to another cup
    WSS… Winkelstück
    WSY... Y-Angle Clamp
    • Allows for sturdy offset mounting of extension arms and
    components to D profile
    • Adjustable along the channel of the frame profile
    WSY… Y-Klemmstück
    MOUNTING CLAMPS
    MOUNTING CLAMPS
    WLS... Long Angle Connector
    • Allows for low profile height by mounting vacuum cups directly to the
    frame profile
    • Adjustable parallel and perpendicular to the frame profile
    • Extra port can connect vacuum to another cup
    WLS… Winkelstück (lang)
    Aluminum A B C D E Profile
    Weight
    (g)
    Price
    WSY 20 D 20 55 17 25 113 D 126 $22.50
    A B C D E Profile
    Weight
    (g)
    Price
    WSS M5 L M5 16 32 18 M5 L 18 $12.00
    WSS 1/8 X G 1/8" 25 46 25 G 1/8" X 47 $14.75
    WSS 1/4 X G 1/4" 25 46 25 G 1/8" X 47 $15.50
    A B C D E F G Profile Weight (g) Price
    WLS M5 M5 16 16 45 M5 6 13 L/X 13 $13.00
    WLS 1/8 G 1/8" 25 23 57 G 1/8" 8 16 L/X/HX/D ~ $18.25
    WLS 1/4 G 1/4" 25 23 57 G 1/8" 8 16 L/X/JX/HX/D ~ $18.25
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    SAS... Vacuum Cup Connector
    • Provides minimum profile height, allowing vacuum cups to be mounted to the
    side of the frame profile
    • Adjustable along the channel of the frame profile
    SAS… Saugeranschluss (seitlich)
    WSF... Long Angle Plate
    • Mounts Grip-It! Vacuum Cup Holders to our standard frame profile
    WSF… Befestigungsplatte (lang)
    MOUNTING CLAMPS
    WSD... Adjustable Angle Connector
    • Allows for low profile height by mounting vacuum cups directly
    to the frame profile
    • Adjustable along the frame profile and at any rotational angle
    WSD… Winkelstück 360º drehbar
     A B C D E Profile Weight (g) Price
    SAS 1/8 G 1/8" G 1/8" 16 25 38 L/X/D 43 $10.75
    SAS 1/4 G 1/4" G 1/8" 16 25 38 X/JX/HX/D 42 $10.75
     A B C D E Profile Weight (g) Price
    WSF 10.5 11 27 21 57 100 L/X/JX/HX/D 37 $12.50
    WSF 12.5 13 27 21 57 100 L/X/JX/HX/D 37 $16.63
    WSF 16.5 17 27 21 57 100 L/X/JX/HX/D 35 $16.16
    A B C D E Angle Profile Weight (g) Price
    WSD M5 M5 16 16 M5 32 360 L/X 21 $14.90
    WSD 1/8 G 1/8" 25 23 G 1/8" 46 360 L/X/JX/HX/D 60 $18.75
    WSD 1/4 G 1/4" 25 23 G 1/8" 46 360 L/X/JX/HX/D 59 $24.71
    + sas-automation.com | 43
    WKA... Angle Arm
    • Extends and mounts components to
    mounting clamps
    • Supplies 90° mounting with rotation
    WKA… Winkelarm
    GLA... Elbow Arm
    • Angle adjustable elbow
    • Useful for adjustment of GRZ gripper pliers and
    GRF gripper fingers
    GLA… Gelenkarm
    GREIFARME
    GRIPPER MOUNTING ARMS
    GRIPPER MOUNTING ARMS
     A B C D E L Weight (g) Price
    WKA 10-90 10 13 10 20 16 90 22 $16.75
    WKA 14-120 14 9 14 25 22 120 21 $20.50
    WKA 20-150 20 21 20 33 25 150 92 $27.50
    WKA 30-200 30 30 30 48 32 200 224 $32.25
     A B C D E L
    Weight
    (g)
    Price
    GLA 10-90 10 11 10 27 40 90 36 $19.00
    GLA 14-120 14 16 14 43 54 120 70 $28.15
    GLA 20-150 20 18 20 46 64 150 150 $38.50
    GLA 20/30-150 20 17 30 52 77 150 193 $42.75
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    GSE... Gripper Arm
    • Extends and mounts vacuum cups to mounting clamps
    • Side ported for quick-touch pneumatic hose connectors
    • The recommended max torque is 50 in-lbs (5.6 N-m) on M5
    screws when clamping on shafts.
    GSE… Greifarm
    GGA... Spring Loaded Elbow Arm
    • Angle adjustable elbow arm
    • Spring loaded for part compliance
    GGA… Gelenkarm (gefedert)
    GRIPPER MOUNTING ARMS
     A B C D E F G H
    Weight
    (g)
    Price
    GGA 14-C-15 14 14 15 75 23 40 32 19 109 $50.00
    GGA 14-C-40 14 14 40 100 23 40 32 19 121 $50.00
    GGA 20-C-20 20 20 20 107 28 49 55 25 278 $56.00
    GGA 20-C-50 20 20 50 137 28 49 55 25 311 $59.00
     A B C D L
    Weight
    (g)
    Price
    GSE 10-M5-90 10 M5 M5 10 90 17 $13.25
    GSE 10-1/8-90 10 G 1/8" M5 10 90 18 $15.00
    GSE 14-120 14 G 1/8" G 1/8" 22 120 32 $23.25
    GSE 20-150 20 G 1/4" G 1/8" 30 150 77 $27.00
    GSE 30-200 30 G 1/4" G 1/4" 30 200 183 $33.00
    GSE 30-3/8-200 30 G 3/8" G 1/4" 30 200 176 $34.00
    + sas-automation.com | 45
    GAF... Spring Loaded Gripper Arm
    • Extends and mounts vacuum cups to mounting clamps
    • Side ported for quick-touch pneumatic hose connectors
    • Spring-loaded for part compliance
    • Available with clampable shaft (C) and threaded shaft (M)
    • Threaded shafts include jam nuts and lock washers for plate mounting
    GEP... Spring Loaded Gripper Arm
    • Extends and mounts vacuum cups to mounting
    clamps
    • End ported for quick-touch pneumatic hose
    connectors
    • Spring-loaded for part compliance
    • Available with clampable shaft (C) and threaded
    shaft (M)
    • Threaded shafts include jam nuts and lock
    washers for plate mounting
    GEP… Greifarm gefedert
    GAF… Greifarm gefedert
    GRIPPER MOUNTING ARMS
    GRIPPER MOUNTING ARMS
    C-Type A B C D E F Weight (g) Price
    GAF 10-C-10 M5 M5 10 10 60 13 22 $25.25
    GAF 14-C-15 G 1/8" G 1/8" 14 15 72 16 42 $36.00
    GAF 14-C-40 G 1/8" G 1/8" 14 40 100 16 48 $39.00
    GAF 20-C-20 G 1/4" G 1/8" 20 20 109 22 132 $39.00
    GAF 20-C-50 G 1/4" G 1/8" 20 50 143 22 148 $42.00
    GAF 30-C-40 G 3/8" G 1/4" 30 80 180 32 348 $51.00
    GAF 30-C-80 G 3/8" G 1/4" 30 80 180 32 399 $54.00
    M-Type A B C D E F Weight (g) Price
    GAF 10-M-10 M5 M5 M10 X 1 10 60 13 33 $26.25
    GAF 14-M-15 G 1/8" G 1/8" M14 X 1.5 15 72 16 55 $36.75
    GAF 14-M-40 G 1/8" G 1/8" M14 X 1.5 40 100 16 61 $39.75
    GAF 20-M-20 G 1/4" G 1/8" M20 X 1.5 20 109 22 154 $40.00
    GAF 20-M-50 G 1/4" G 1/8" M20 X 1.5 50 143 22 172 $43.00
    GAF 30-M-40 G 3/8" G 1/4" M30 X 1.5 40 152 32 432 $53.00
    GAF 30-M-80 G 3/8" G 1/4" M30 X 1.5 80 180 32 492 $56.00
    C-Type A B C D E F
    Weight
    (g)
    Price
    GEP 10-C-10 M5 M5 10 10 64 13 19 $27.00
    GEP 14-C-15 G 1/8" M5 14 15 84 16 40 $39.00
    GEP 14-C-40 G 1/8" M5 14 40 109 16 46 $43.00
    GEP 20-C-20 G 1/4" G 1/8" 20 20 116 22 124 $48.00
    GEP 20-C-50 G 1/4" G 1/8" 20 50 146 22 140 $53.00
    M-Type A B C D E F
    Weight
    (g)
    Price
    GEP 10-M-10 M5 M5 M10 X 1 10 64 13 30 $28.00
    GEP 14-M-15 G 1/8" M5 M14 X 1.5 15 84 16 53 $39.75
    GEP 14-M-40 G 1/8" M5 M14 X 1.5 40 109 16 59 $43.75
    GEP 20-M-20 G 1/4" G 1/8" M20 X 1.5 20 116 22 148 $49.00
    GEP 20-M-50 G 1/4" G 1/8" M20 X 1.5 50 146 22 163 $54.00
     D
    ØF
    E
    B
    A
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    GNE... Non-Rotational Gripper Arm
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    GNE…Greifarm verdrehgesichert
    • Extends and mounts vacuum cups to mounting clamps
    • End ported for quick-touch pneumatic hose connectors
    • When clamping shafts, maximum recommended torque on M5 clamping
    screws is 50 in-lbs (5.6 N-m)
    • Available with clampable shaft (C) and threaded shaft (M)
    • Threaded shafts include jam nuts and lock washers for plate mounting
    GSZ... Inline Spring Arm
    Compatible with SAS GRZ 20-16… Sprue/Part Pliers, this spring loaded arm
    enables the GRZ to absorb the ejector stroke of the mold. Used when sprues
    and runner systems do not stay on the ejector pins after ejection from the
    mold.
    Specifications:
    • Inline spring arm for GRZ 20-16… Part / Sprue Pliers
    • End ported for quick- touch pneumatic hose connectors
    • Available with clampable shafts (C) and threaded shaft (M)
    • Threaded shafts include jam nut and lock washers for plate mounting
    GSZ... gefederter Angusszangenarm
    GRIPPER MOUNTING ARMS
    C-Type A B ØC D E F
    Weight
    (g)
    Price
    GNE 14-C-15 G 1/8" G 1/8" 14 15 93 16 65 $42.50
    GNE 14-C-40 G 1/8" G 1/8" 14 40 118 16 72 $45.00
    GNE 20-C-20 G 1/4" G 1/8" 20 20 132 22 206 $48.00
    GNE 20-C-50 G 1/4" G 1/8" 20 50 162 22 234 $53.50
    A B ØC D E F
    Weight
    (g)
    Price
    GNE 14-M-15 G 1/8" G 1/8" M14 x 1.5 15 93 16 76 $43.50
    GNE 14-M-40 G 1/8" G 1/8" M14 x 1.5 40 118 16 83 $46.50
    Type A B C D E F G
    Weight
    (g)
    Price
    GSZ 14-C-15 G 1/8 G 1/8 14 15 88 19 193 72 $42.50
    GSZ 14-C-40 G 1/8 G 1/8 14 15 113 19 217 68 $45.50
    GSZ 14-M-15 G 1/8 G 1/8 M14 x 1.5 40 88 19 193 72 $43.50
    GSZ 14-M-40 G 1/8 G 1/8 M14 x 1.5 40 113 19 217 80 $46.50
    GSZ 20-C-20 G 1/8 G 1/8 20 20 102 22 206 136 $48.00
    GSZ 20-M-20 G 1/8 G 1/8 M20 x 1.5 20 102 22 206 ~ $48.00
    + sas-automation.com | 47
    GGE... Elbow Gripper Arm
    • Extends and mounts vacuum cups to mounting clamps
    • Side ported for quick-touch pneumatic hose connectors
    • Top bracket adjusts angle to match contour of part
    • When clamping shafts, maximum recommended torque on M5 clamping screws is
    50 in-lbs (5.6 N-m)
    • One-piece arm for high strength applications
    • "Green" EOAT application
    GGE…Gelenkgreifarm
    GGS... Spring Loaded Non-Rotational Gripper Arm
    • Extends and mounts vacuum cups to mounting clamps
    • SFX Type includes a proximity sensor for compliance and top of
    stack detection
    • Side ported for quick-touch pneumatic hose connectors
    • Top bracket adjusts angle to match contour of part
    • Spring-loaded for part compliance
    • Available with clampable shaft (C), threaded shaft (M), and Bearing Type (B)
    • Threaded shafts include jam nuts and lock washers for plate mounting
    • Bearing Type offers super smooth operation
    • "Green" EOAT application
    GGS… Greifarm gefedert & verdrehgesichert
    GRIPPER MOUNTING ARMS
    GRIPPER MOUNTING ARMS
     A B C D L
    Weight
    (g)
    Price
    GGE 10-90 M5 10 17 24 90 21 $22.75
    GGE 14-120 G1/8" 14 24 31 120 45 $32.00
    GGE 20-150 G1/4" 20 30 40 150 105 $33.50
    GGE 30-200 G1/4" 30 33 45 200 181 $44.25
    C-Type A B C (Dia/Thread) D E F
    Weight
    (g)
    Price
    GGS 10-C-10 M5 10 10 34 64 22 34 $33.50
    GGS 14-C-15 G 1/8" 15 14 51 88 31 93 $45.50
    GGS 14-C-40 G 1/8" 40 14 76 113 31 105 $49.25
    GGS 14-C-40 SFX* G 1/8" 40 14 76 113 31 ~ $158.60
    GGS 20-C-20 G 1/4" 20 20 63 125 40 251 $51.00
    GGS 20-C-50 G 1/4" 50 20 93 155 40 283 $54.00
    ** With RRK-TL-W3MB1 Sensor
    See "Sensors, Connectors, and Accessories" section" for sensor specifications and offerings.
    M-Type A B C (Dia/Thread) D E F
    Weight
    (g)
    Price
    GGS 10-M-10 M5 10 M10 X 1 34 64 22 46 $34.75
    GGS 14-M-15 G 1/8" 15 M14 X 1.5 51 88 31 104 $46.50
    GGS 14-M-40 G 1/8" 40 M14 X 1.5 76 113 31 117 $48.50
    GGS 20-M-20 G 1/4" 20 M20 X 1.5 63 125 40 275 $52.75
    GGS 20-M-50 G 1/4" 50 M20 X 1.5 93 155 40 307 $55.25
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    RVA... Retracting Vacuum Arm
    • Used in conjunction with a vacuum cup to retract the
    work piece once vacuum is made
    • Aids in insert molding, transfer molding, and short
    cycle molding
    • Extendable for longer reach (using VLR)
    RVA… Vakuumarm, einziehbar
    RVA…
    GRIPPER MOUNTING ARMS
     A B C D E F G (Hub) Weight (g) Price
    RVA 20-30 20 39 120 M17 x 1 81 G 1/8" 30 47 $99.50
    RVA 20-60 20 69 190 M17 x 1 121 G 1/8" 60 68 $115.00
    RVA 30-50 30 71 190 M27 x 1 119 G 1/8" 50 157 $155.00
    + sas-automation.com | 49
    Vacuum / Suction cupS
    VACUUM CUP MATERIAL:
    Chloroprene (C): Good wear resistance properties, O-zone resistant, -40° to 230°F (-40° to 110°C)
    Polyurethane (P): Best wear resistance, super long life, oil resistant, non-marking, 0° to 320°F (0° to 160°C)
    Nitril Rubber (N): Good wear resistance properties, oil resistant, -20° to 225°F (-29° to 107°C)
    Silicone (S): Soft material, especially good for rough/textured surfaces, -86° to 392°F (-65° to 200°C)
    Viton (V): High resistance against compression and tension, -23° to 446°F (-30° to 230°C)
    Polyurethane (Pu): Soft polyurethane, best on textured surfaces, good wear resistance, oil resistant, -68° to 167°F (-55° to 75°C)
    Duel Durometer Polyurethane (DDP): Soft seal with stiffer base, best on textured surfaces with high vacuum levels, good wear and oil
    resistance, -50° to 122°F (10° to 50°C)
    LIFTING CAPACITY:
    The lifting capacity of a vacuum cup can be
    theoretically determined at sea level by using the
    following formula:
    C =
    .393 x D 2 x V
    N
    C = Lifting Capacity (lbs.)
    D = Cup Diameter (in.)
    V = Vacuum Level (in. Hg)
    N = Desired Safety Factor
    Safety factor for horizontal lifting applications
    should be at least (2). Vertical lifting applications
    should have a safety factor of at least (4).
    SIZING VACUUM CUPS:
    When sizing a vacuum cup there are three crucial
    factors to consider. These are vacuum level,
    number of cups, and the desired safety factor.
    Cup diameter can be determined by using the
    following formula:
    D = 1.61 x ( M x N / V x U)
    D = Cup Diameter (in.)
    M = Mass of lifting products (lbs.)
    V = Vacuum Level (in. Hg)
    N = Safety Factor
    U = Number of Cups
    VC 1... Flat Vacuum cup
    • Flat cups for flat surfaces and high side
    loading
    • Sealing ring included
    VC 1… Vakuumsauger (1 Kante)
    VAKUUMSAUGER
    Vacuum/Suction cupS
    Chloroprene (C) Cup Material
    Cup (w/ Adapter) A B Weight (g) Price
    Replacement
    Cup
    Weight
    (g)
    Price
    (Cup Only)
    VC 1-15-C5 15 M5 3 $3.68 VCN 1-15-C 3 $2.99
    VC 1-20-C8 20 G1/8" 4 $7.40 VCN 1-20-C 4 $4.31
    VC 1-25-C8 25 G1/8" ~ $7.57 VCN 1-25-C ~ $4.50
    VC 1-30-C8 30 G1/8" 5 $7.84 VCN 1-30-C 5 $4.81
    Nitril (N) Cup Material
    Cup (w/ Adapter) A B Weight (g) Price
    Replacement
    Cup
    Weight
    (g)
    Price
    (Cup Only)
    VC 1-40-N4 40 G1/4" 13 $10.50 VCN 1-40-N 13 $6.06
    VC 1-50-N4 50 G1/4" 24 $12.64 VCN 1-50-N 24 $6.98
    VC 1-75-N4 75 G1/4" 92 $33.46 VCN 1-75-N 92 $12.53
    VC 1-110-N2 110 G1/2" ~ $47.08 VCN 1-110-N ~ $19.72
    Silicone (S) Cup Material
    Cup (w/ Adapter) A B Weight (g) Price
    Replacement
    Cup
    Weight
    (g)
    Price
    (Cup Only)
    VC 1-15-S5 15 M5 ~ $5.32 VCN 1-15-S 3 $4.35
    VC 1-20-S8 20 G1/8" ~ $8.94 VCN 1-20-S ~ $6.04
    VC 1-25-S8 25 G1/8" ~ $9.30 VCN 1-25-S 4 $6.43
    VC 1-30-S8 30 G1/8" 5 $9.51 VCN 1-30-S 5 $6.66
    VC 1-40-S4 40 G1/4" 15 $13.86 VCN 1-40-S 13 $9.16
    VC 1-50-S4 50 G1/4" 22 $19.16 VCN 1-50-S 22 $14.41
    VC 1-75-S4 75 G1/4" ~ $35.98 VCN 1-75-S ~ $20.87
    VC 1-110-S2 110 G1/2" 261 $70.18 VCN 1-110-S 261 $44.67
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    VC 2... 1.5 BELLoWS Vacuum cup / Suction cup
    • Bellow for part compliance
    • Comes with sealing ring
    VC 3... 2.5 Bellows Vacuum cup
    • Multiple bellows for maximum
    part compliance
    • Sealing ring included
    • Works well on textured surfaces
    VC 2… Vakuumsauger (1.5 Kanten)
    VC 3…Vakuumsauger (2.5 Kanten)
    VC 2…
    VC 3…
    Vacuum / Suction cupS
    Polyurethane (DDP) Cup Material w/ Adapters
    Cup (w/
    Adapter)
    A B
    Weight
    (g)
    Price
    Replacement
    Cup
    Weight (g) Price
    VC 3-10-DDP5 10 M5 3 $7.14 VCN 3-10-DDP 1 $5.96
    VC 3-15-DDP5 15 M5 4 $8.49 VCN 3-15-DDP 1 $7.31
    VC 3-20-DDP8 20 G 1/8” 4 $14.98 VCN 3-20-DDP 2 $9.89
    VC 3-25-DDP8 25 G 1/8" 6 $19.96 VCN 3-25-DDP 3 $12.50
    VC 3-35-DDP4 35 G 1/4" 15 $21.48 VCN 3-35-DDP 8 $18.29
    VC 3-52-DDP4 52 G 1/4" 34 $25.16 VCN 3-52-DDP 24 $19.34
    VC 3-75-DDP3 75 G 3/8" 82 $37.06 ~ ~ ~
    VC 3-110-DDP3 110 G 3/8" 252 $86.54 VCN 3-110-DDP 225 $80.53
    * These cups are made of 30 Durometer Polyurethane on the bottom 1/2 bellow & 60 Durometer
    Polyurethane on the top two bellows.
    Chloroprene (C) Cup Material
    Cup w/ Adapter A B
    Weight
    (g)
    Price
    Replacement
    Cup
    Weight
    (g)
    Price
    VC 2-10-C5 10 M5 3 $4.72 VCN 2-10-C 1 $3.60
    VC 2-15-C5 15 M5 4 $4.72 VCN 2-15-C 2 $3.60
    VC 2-20-C8 20 G 1/8" 6 $9.38 VCN 2-20-C 3 $5.42
    VC 2-30-C4 30 G 1/4" 15 $12.69 VCN 2-30-C 8 $7.49
    VC 2-40-C4 40 G 1/4" 19 $13.64 VCN 2-40-C 12 $9.38
    Nitril (N) Cup Material
    Cup w/ Adapter A B
    Weight
    (g)
    Price
    Replacement
    Cup
    Weight
    (g)
    Price
    VC 2-50-N4 50 G 1/4" 38 $15.80 VCN 2-50-N 26 $10.47
    VC 2-75-N4 75 G 1/4" 114 $42.42 VCN 2-75-N ~ $35.33
    VC 2-110-N2 110 G 1/2" ~ $61.26 VCN 2-110-N ~ $28.50
    Silicone (S) Cup Material
    Cup w/ Adapter A B
    Weight
    (g)
    Price
    Replacement
    Cup
    Weight
    (g)
    Price
    VC 2-10-S5 10 M5 3 $7.74 VCN 2-10-S 1 $6.77
    VC 2-15-S5 15 M5 4 $9.12 VCN 2-15-S 1 $8.23
    VC 2-20-S8 20 G 1/8" 5 $13.62 VCN 2-20-S 2 $10.50
    VC 2-30-S8 30 G 1/8" 9 $19.02 VCN 2-30-S 6 $15.03
    VC 2-40-S4 40 G 1/4" 18 $21.52 VCN 2-40-S 11 $17.64
    VC 2-50-S4 50 G 1/4" 34 $25.16 VCN 2-50-S 22 $20.51
    VC 2-75-S4 75 G 1/4" 117 $55.86 VCN 2-75-S ~ $49.05
    VC 2-110-S2 110 G 1/2" ~ $79.38 VCN 2-110-S ~ $47.51
    + sas-automation.com | 51
    VS 0... oval Vacuum cup / Suction cup
    • Oval cups for long
    narrow parts
    • Sealing ring included
    VS 0…Vakuumsauger oval
    Vacuum/Suction cupS
    Vacuum / Suction cupS
    VS 1... Flat Vacuum cup / Suction cup
    • Flat cups for flat surfaces and high
    side loading
    • Sealing ring included
    VS 1… Vakuumsauger (1 Kante)
    Polyurethane (P) Cup Material
    Cup (w/
    Adapter)
    Adapter A B
    Weight
    (g)
    Price
    Replace-
    ment Cup
    Weight
    (g)
    Price
    VS 1-2-P5 VSA 10 2 M5 ~ $11.48 VN 1-2-P 1 $8.10
    VS 1-3.5-P5 VSA 10 3.5 M5 1 $11.48 VN 1-3.5-P ~ $8.10
    VS 1-5-P5 VSA 30 5 M5 1 $6.52 VN 1-5-P ~ $4.00
    VS 1-8-P5 VSA 30 8 M5 1 $6.56 VN 1-8-P 0.3 $4.00
    VS 1-10-P5 VSA 30 10 M5 1 $6.94 VN 1-10-P 0.3 $4.38
    VS 1-15-P5 VSA 30 15 M5 1 $6.94 VN 1-15-P ~ $4.38
    VS 1-20-P8 VSA 50 20 G 1/8" 5 $7.24 VN 1-20-P 2 $4.16
    VS 1-25-P8 VSA 60 25 G 1/8" ~ $7.28 VN 1-25-P 3 $4.20
    VS 1-30-P8 VSA 60 30 G 1/8" 6 $7.60 VN 1-30-P ~ $4.52
    VS 1-40-P8 VSA 60 40 G 1/8" 11 $7.92 VN 1-40-P 8 $4.84
    VS 1-50-P8 VSA 80 50 G 1/8" 13 $9.08 VN 1-50-P ~ $5.32
    VS 1-60-P4 VSA 110 60 G 1/4" 29 $18.34 VN 1-60-P ~ $10.42
    VS 1-80-P4 VSA 110 80 G 1/4" 57 $21.62 VN 1-80-P ~ $13.70
    VS 1-95-P4 VSA 110 95 G 1/4" ~ $28.92 VN 1-95-P ~ $21.11
    Nitril (N) Cup Material
    Cup (w/ Adapter) Adapter A B
    Weight
    (g)
    Price Replacement Cup
    Weight
    (g)
    Price
    VS 1-2-N5 VSA 10 2 M5 1 $5.78 VN 1-2-N ~ $3.40
    VS 1-3.5-N5 VSA 10 3.5 M5 1 $5.78 VN 1-3.5-N ~ $4.25
    VS 1-5-N5 VSA 30 5 M5 1 $4.72 VN 1-5-N ~ $3.15
    VS 1-8-N5 VSA 30 8 M5 1 $4.72 VN 1-8-N 1 $3.15
    VS 1-10-N5 VSA 30 10 M5 1 $4.84 VN 1-10-N 1 $3.44
    VS 1-15-N5 VSA 30 15 M5 1 $4.84 VN 1-15-N ~ $3.44
    VS 1-20-N8 VSA 50 20 G 1/8" 5 $4.92 VN 1-20-N 2 $3.57
    VS 1-25-N8 VSA 60 25 G 1/8" 6 $4.96 VN 1-25-N 3 $3.57
    VS 1-30-N8 VSA 60 30 G 1/8" 7 $5.08 VN 1-30-N 3 $3.74
    VS 1-40-N8 VSA 60 40 G 1/8" 11 $5.28 VN 1-40-N 2 $3.99
    VS 1-50-N8 VSA 80 50 G 1/8" ~ $5.34 VN 1-50-N ~ $4.58
    VS 1-60-N4 VSA 110 60 G 1/4" 30 $19.92 VN 1-60-N ~ $12.52
    VS 1-80-N4 VSA 110 80 G 1/4" 59 $21.93 VN 1-80-N 52 $14.53
    VS 1-95-N4 VSA 110 95 G 1/4" 98 $27.77 VN 1-95-N ~ $20.37
    Silicone (S) Cup Material
    Cup (w/ Adapter) Adapter A B
    Weight
    (g)
    Price Replacement Cup
    Weight
    (g)
    Price
    VS 1-2-S5 VSA 10 2 M5 ~ $6.56 VN 1-2-S ~ $3.18
    VS 1-3.5-S5 VSA 10 3.5 M5 1 $6.56 VN 1-3.5-S ~ $3.18
    VS 1-5-S5 VSA 30 5 M5 1 $5.28 VN 1-5-S ~ $2.72
    VS 1-8-S5 VSA 30 8 M5 1 $5.28 VN 1-8-S 1 $2.72
    VS 1-10-S5 VSA 30 10 M5 1 $5.40 VN 1-10-S 1 $2.84
    VS 1-15-S5 VSA 30 15 M5 1 $5.40 VN 1-15-S 1 $4.95
    VS 1-20-S8 VSA 50 20 G 1/8" ~ $5.58 VN 1-20-S 2 $2.50
    VS 1-25-S8 VSA 60 25 G 1/8" ~ $5.58 VN 1-25-S ~ $2.50
    VS 1-30-S8 VSA 60 30 G 1/8" 6 $5.70 VN 1-30-S 3 $2.62
    VS 1-40-S8 VSA 60 40 G 1/8" 10 $5.90 VN 1-40-S 1 $2.82
    VS 1-50-S8 VSA 80 50 G 1/8" 14 $6.56 VN 1-50-S ~ $2.80
    VS 1-60-S4 VSA 110 60 G 1/4" 29 $14.96 VN 1-60-S ~ $7.04
    VS 1-80-S4 VSA 110 80 G 1/4" 64 $17.24 VN 1-80-S ~ $13.05
    VS 1-95-S4 VSA 110 95 G 1/4" ~ $23.44 VN 1-95-S ~ $16.99
    Viton (V) Vacuum Cups w/ adapters
    Cup (w/ Adapter) Adaptor A B
    Weight
    (g)
    Price Replacement Cup
    Weight
    (g)
    Price
    VS 1-8-V5 VSA 30 8 M5 ~ $19.76 VN 1-8-V 1 $13.83
    VS 1-10-V5 VSA 30 10 M5 ~ $19.76 VN 1-10-V ~ $17.20
    VS 1-20-V8 VSA 50 20 G 1/8" 7 $17.30 VN 1-20-V ~ $14.22
    VS 1-25-V8 VSA 60 25 G 1/8" 8 $17.30 VN 1-25-V ~ $14.22
    VS 1-30-V8 VSA 60 30 G 1/8" ~ $22.58 VN 1-30-V ~ $19.50
    VS 1-40-V8 VSA 60 40 G 1/8" ~ $22.58 VN 1-40-V ~ $19.50
    VS 1-50-V8 VSA 80 50 G 1/8" 20 $23.86 VN 1-50-V ~ $20.10
    Nitril (N) Cup Material
    Cup (w/ Adapter) A B C
    Weight
    (g)
    Price
    Replacement
    Cup
    Price (Cup
    Only)
    Weight
    (g)
    Adapter
    VS 0-2 x 4 N 2 4 M3 1 $8.80 VN 0-2 x 4 N $8.02 1 VSA 5
    VS 0-3.5 x 7 N 3.5 7 M3 1 $8.02 VN 0-3.5 x 7 N $4.72 1 VSA 5
    VS 0-5 x 15 N 5 15 M5 2 $17.89 VN 0-5 x 15 N $13.96 1 VSA 15
    VS 0-6 x 18 N 6 18 M5 2 $19.12 VN 0-6 x 18 N $13.96 1 VSA 15
    VS 0-8 x 24 N 8 24 G 1/8" 7 $20.56 VN 0-8 x 24 N $15.40 1 VSA 20
    VS 0-10 x 30 N 10 30 G 1/8" 7 $22.24 VN 0-10 x 30 N $17.08 1 VSA 20
    VS 0-15 x 45 N 15 45 G 1/4" 16 $16.18 VN 0-15 x 45 N $18.72 4 VSA 130
    VS 0-20 x 60 N 20 60 G 1/4" 20 $32.24 VN 0-20 x 60 N $35.55 ~ VSA 130
    VS 0-25 x 75 N 25 75 G 1/4" ~ $33.82 VN 0-25 x 75 N $28.66 ~ VSA 130
    VS 0-30 x 90 N 30 90 G 1/4" 36 $37.86 VN 0-30 x 90 N $32.70 ~ VSA 130
    Silicone (S) Cup Material
    Cup (w/ Adapter) A B C
    Weight
    (g)
    Price
    Replacement
    Cup
    Price (Cup
    Only)
    Weight
    (g)
    Adapter
    VS 0-2 X 4 S 2 4 M3 1 $10.20 VN 0-2 x 4 S $9.00 1 VSA 5
    VS 0-3.5 x 7 S 3.5 7 M3 1 $10.20 VN 0-3.5 x 7 S $7.08 1 VSA 5
    VS 0-5 x 15 S 5 15 M5 2 $16.34 VN 0-5 x 15 S $13.75 1 VSA 15
    VS 0-6 x 18 S 6 18 M5 2 $15.56 VN 0-6 x 18 S $13.75 1 VSA 15
    VS 0-8 x 24 S 8 24 G 1/8" 7 $19.69 VN 0-8 x 24 S $14.88 1 VSA 20
    VS 0-10 x 30 S 10 30 G 1/8" 7 $28.17 VN 0-10 x 30 S $28.35 1 VSA 20
    VS 0-15 x 45 S 15 45 G 1/4" 16 $18.71 VN 0-15 x 45 S $17.25 4 VSA 130
    VS 0-20 x 60 S 20 60 G 1/4" 22 $39.00 VN 0-20 x 60 S $35.55 ~ VSA 130
    VS 0-25 x 75 S 25 75 G 1/4" 22 $34.42 VN 0-25 x 75 S $26.71 ~ VSA 130
    VS 0-30 x 90 S 30 90 G 1/4" 36 $39.42 VN 0-30 x 90 S $34.94 ~ VSA 130
    VSA Adapters
    Weight (g) Price
    VSA 5 1 $3.30
    VSA 10 1 $3.38
    VSA 15 1 $5.16
    VSA 20 4 $5.16
    VSA 30 1 $3.42
    VSA 40 1 $4.20
    VSA 50 3 $3.08
    VSA 70 3 $3.60
    VSA 80 5 $4.40
    VSA 90 5 $3.16
    VSA 100 10 $8.98
    VSA 110 6 $8.98
    VSA 130 10 $8.98
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    • Bellow for part compliance
    • Sealing ring included
    VS 2… Vakuumsauger (2 Kanten)
    VS 2…
    VS 2... 1.5 Bellows Vacuum cup / Suction cup
    VS 3... 2.5 Bellows Vacuum cup / Suction cup
    • Multiple bellows for maximum compliance
    • Sealing ring included
    VS 3… Vakuumsauger (2.5 Kanten)
    VS 3…
    Vacuum / Suction cupS
    Nitril (N) Cup Material
    Cup (w/ Adapter) A B Price Weight (g) Replacement Cup Weight (g) Price (Cup Only) Adapter
    VS 2-10-N5 10 M5 $5.90 1 VN 2-10-N 1 $3.80 VSA 30
    VS 2-15-N5 15 M5 $6.56 2 VN 2-15-N 1 $4.60 VSA 30
    VS 2-20-N8 20 G 1/8" $7.35 6 VN 2-20-N 3 $4.80 VSA 50
    VS 2-30-N8 30 G 1/8" $8.85 12 VN 2-30-N 8 $4.70 VSA 50
    VS 2-40-N8 40 G 1/8" $10.12 19 VN 2-40-N 14 $6.24 VSA 50
    VS 2-50-N8 50 G 1/8" $10.68 28 VN 2-50-N 25 $6.92 VSA 80
    VS 2-75-N4 75 G 1/4" $25.96 92 VN 2-75-N 88 $18.04 VSA 110
    Silicone (S) Cup Material
    Cup (w/ Adapter) A B Price Weight (g) Replacement Cup Weight (g) Price (Cup Only) Adapter
    VS 2-10-S5 10 M5 $9.32 1 VN 2-10-S 1 $5.20 VSA 30
    VS 2-15-S5 15 M5 $9.88 2 VN 2-15-S 1 $7.00 VSA 30
    VS 2-20-S8 20 G 1/8" $10.00 6 VN 2-20-S 3 $7.80 VSA 50
    VS 2-30-S8 30 G 1/8" $10.80 11 VN 2-30-S 12 $7.72 VSA 50
    VS 2-40-S8 40 G 1/8" $17.38 17 VN 2-40-S 14 $14.28 VSA 50
    VS 2-50-S8 50 G 1/8" $16.30 25 VN 2-50-S 21 $12.62 VSA 80
    VS 2-75-S4 75 G 1/4" $39.15 90 VN 2-75-S 85 $26.56 VSA 110
    Polyurethane (P) Cup Material
    Cup (w/ Adapter) A B Price Weight (g) Replacement Cup Weight (g) Price (Cup Only) Adapter
    VS 2-10-P5 10 M5 $9.76 1 VN 2-10-P 1 $7.20 VSA 30
    VS 2-15-P5 15 M5 $11.24 2 VN 2-15-P 1 $8.68 VSA 30
    VS 2-20-P8 20 G 1/8" $11.66 6 VN 2-20-P 3 $8.58 VSA 50
    VS 2-30-P8 30 G 1/8" $13.94 12 VN 2-30-P 9 $10.86 VSA 50
    VS 2-40-P8 40 G 1/8" $17.36 19 VN 2-40-P 16 $14.28 VSA 50
    VS 2-50-P8 50 G 1/8" $25.86 25 VN 2-50-P 27 $23.56 VSA 80
    VS 2-75-P4 75 G 1/4" $60.00 88 VN 2-75-P ~ $52.08 VSA 110
    Nitril (N) Cup Material
    Cup (w/Adapter) A B
    Weight
    (g)
    Price
    Replacement
    Cup
    Price Adapter
    VS 3-5-N5 5 M5 1 $6.74 VN 3-5-N $4.18 VSA 30
    VS 3-8-N5 8 M5 ~ $6.74 VN 3-8-N $4.18 VSA 30
    VS 3-10-N5 10 M5 2 $8.08 VN 3-10-N $3.02 VSA 40
    VS 3-10-N8 10 G 1/8" ~ $6.77 VN 3-10-N $3.02 VSA 70
    VS 3-15-N5 15 M5 2 $6.44 VN 3-15-N $3.02 VSA 40
    VS 3-15-N8 15 G 1/8" 4 $6.44 VN 3-15-N $3.02 VSA 70
    VS 3-18-N5 18 M5 ~ $8.26 VN 3-18-N $6.08 VSA 40
    VS 3-18-N8 18 G 1/8" 5 $6.88 VN 3-18-N $6.08 VSA 70
    VS 3-20-N5 20 M5 3 $7.06 VN 3-20-N $3.64 VSA 40
    VS 3-20-N8 20 G 1/8" 5 $7.39 VN 3-20-N $3.64 VSA 70
    VS 3-30-N8 30 G 1/8" ~ $8.04 VN 3-30-N $4.88 VSA 90
    VS 3-40-N8 40 G 1/8" 24 $10.06 VN 3-40-N $6.90 VSA 90
    VS 3-60-N8 60 G 1/8" 92 $14.30 VN 3-60-N $11.14 VSA 90
    VS 3-90-N4 90 G 1/4" 186 $31.16 VN 3-90-N $22.18 VSA 100
    Polyurethane (P) Cup Material
    Cup (w/Adapter) A B
    Weight
    (g)
    Price
    Replacement
    Cup
    Price Adapter
    VS 3-5-P5 5 M5 1 $10.60 VN 3-5-P $8.04 VSA 30
    VS 3-8-P5 8 M5 1 $10.60 VN 3-8-P $8.04 VSA 30
    VS 3-10-P5 10 M5 2 $10.81 VN 3-10-P $6.58 VSA 40
    VS 3-10-P8 10 G 1/8" 3 $10.00 VN 3-10-P $6.58 VSA 70
    VS 3-15-P5 15 M5 2 $10.30 VN 3-15-P $6.88 VSA 40
    VS 3-15-P8 15 G 1/8" 4 $10.30 VN 3-15-P $6.88 VSA 70
    VS 3-18-P5 18 M5 3 $11.30 VN 3-18-P $7.07 VSA 40
    VS 3-18-P8 18 G 1/8" 5 $11.30 VN 3-18-P $7.07 VSA 70
    VS 3-20-P5 20 M5 3 $11.96 VN 3-20-P $8.54 VSA 40
    VS 3-20-P8 20 G 1/8" 5 $11.96 VN 3-20-P $8.54 VSA 70
    VS 3-30-P8 30 G 1/8" ~ $15.82 VN 3-30-P $12.66 VSA 90
    VS 3-40-P8 40 G 1/8" 22 $17.98 VN 3-40-P $14.82 VSA 90
    VS 3-60-P8 60 G 1/8" 40 $38.15 VN 3-60-P $29.66 VSA 90
    Silicone (P) Cup Material
    Cup (w/Adapter) A B
    Weight
    (g)
    Price
    Replacement
    Cup
    Price Adapter
    VS 3-5-S5 5 M5 1 $7.54 VN 3-5-S $4.98 VSA 30
    VS 3-8-S5 8 M5 1 $7.54 VN 3-8-S $4.98 VSA 30
    VS 3-10-S5 10 M5 1 $7.18 VN 3-10-S $3.76 VSA 40
    VS 3-10-S8 10 G 1/8" 3 $7.18 VN 3-10-S $3.76 VSA 70
    VS 3-15-S5 15 M5 2 $7.36 VN 3-15-S $3.94 VSA 40
    VS 3-15-S8 15 G 1/8" 4 $7.36 VN 3-15-S $3.94 VSA 70
    VS 3-18-S5 18 M5 3 $7.66 VN 3-18-S $4.24 VSA 40
    VS 3-18-S8 18 G 1/8" 5 $7.66 VN 3-18-S $4.24 VSA 70
    VS 3-20-S5 20 M5 3 $7.78 VN 3-20-S $4.36 VSA 40
    VS 3-20-S8 20 G 1/8" 5 $7.78 VN 3-20-S $4.36 VSA 70
    VS 3-30-S8 30 G 1/8" ~ $9.94 VN 3-30-S $6.78 VSA 90
    VS 3-40-S8 40 G 1/8" 23 $11.78 VN 3-40-S $8.62 VSA 90
    VS 3-60-S8 60 G 1/8" 41 $17.24 VN 3-60-S $14.08 VSA 90
    VS 3-90-S4 90 G 1/4" 168 $39.70 VN 3-90-S $30.72 VSA 100
    + sas-automation.com | 53
    VAF 20 Pu
    VAF 30 Pu
    VAF 55 PuC
    VAS... Flat Vacuum cup / Suction cup w/adapter
    • Compression molded for long life
    • Extremely reliable and durable, high rigidity
    • Flat cups for flat surfaces or raised cups (H) for curved
    surfaces
    • Sealing ring included
    VAF... Bellows Vacuum cup / Suction cup w/adapter
    • Compression molded for long life
    • Extremely reliable and durable
    • 1.5 or 2.5 bellows for part compliance
    • Sealing ring included
    VAF… Vakuumsauger
    VAS… Vakuumsauger
    Vacuum/Suction cupS
    Vacuum / Suction cupS
    VCF 1..Vakuumsauger (1 Kanten)
    VCF 1... Flat Vacuum cup / Suction cup
    VCF 2..Vakuumsauger (1.5 Kanten)
    VCF 2... Bellows Vacuum cup / Suction cup
     Material A B
    Weight
    (g)
    Price
    VAS 15 Pu Polyurethane (Pu) 15 G 1/8" 5 $9.50
    VAS 20 Pu Polyurethane (Pu) 20 G 1/8" ~ $11.85
    VAS 30 Pu Polyurethane (Pu) 30 G 1/8" 8 $19.75
    VAS 30 Pu/H (Curved
    Surface)
    Polyurethane (Pu) 30 G 1/8" ~ $18.00
    VAS 50 Pu Polyurethane (Pu) 50 G 1/8" 13 $18.90
    VAS 50 Pu/H (Curved
    Surface)
    Polyurethane (Pu) 50 G 1/8" ~ $23.02
    VAS 70 SBR* Buna SBR 70 G 1/4" 122 $37.64
    VAS 80 Pu Polyurethane (Pu) 80 G 1/4" 41 $24.42
    *Reference Nitril (N) for Material Properties
     Material A B
    Weight
    (g)
    Price
    VAF 20 Pu Polyurethane (Pu) 20 G 1/8" 8 $18.35
    VAF 30 Pu Polyurethane (Pu) 30 G 1/8" 10 $20.80
    VAF 55 Pu C* Polyurethane (Pu) 55 G 1/8" 24 $20.70
    *Includes clamp
    Polyurethane Cup Material w/ Adapters
    A B Weight (g) Price
    VCF 2-40-P3 40 G 3/8" 17 $28.81
    VCF 2-60-P3 60 G 3/8" 29 $28.81
    VCF 2-80-P3 80 G 3/8" 75 $29.84
    VCF 2-110-P3 110 G 3/8" 161 $30.07
    Polyurethane Cup Material w/ Adapters
    A B Weight (g) Price
    VCF 1-35-P3 35 G 3/8" 15 $17.49
    VCF 1-50-P3 50 G 3/8" 28 $18.52
    VCF 1-75-P3 75 G 3/8" 58 $23.67
    VCF 1-100-P3 100 G 3/8" 88 $25.73
    VCF 1-125-P3 125 G 3/8" 148 $30.87
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    KHZ... Short Stroke cylinder
    • Cylinders for applications
    such as applying side
    pressure
    • Single and Double acting
    cylinders available
    • Available with or without
    sensor capability
    DPL... pressure plate
    KHZ… Kurzhubzylinder
    DPL… Druckplatte
    • Pad plates for KHZ cylinders or GRF gripper fingers
    • DPL 25's are rubberized to protect parts
    Vakuumsauger-
    Zylinder und Zubehör
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    Vacuum cuP cYLINDERS and accESSoriES
     A B C Face Material Weight (g) Price
    DPL 12-3 12 M3 9 Steel 3 $5.60
    DPL 25-3 25 M3 7 Rubber 11 $4.25
    DPL 25-4 25 M4 13 Rubber 11 $16.51
    DPL 25-5 25 M5 13 Rubber 12 $5.75
     Cyl. Bore A B C D H (Stroke) M Action Sensor Capable*
    Weight
    (g)
    Price
    KHZ 12-5-E 12 M3x0.5 22 3.5 / 6.5 Depth 3.5 M5 5 20.5 Single ~ ~ $19.15
    KHZ 12-5-D 12 M3x0.5 22 3.5 / 6.5 Depth 3.5 M5 5 20.5 Double ~ 31 $20.90
    KHZ 12-5-D-A 12 M3x0.5 22 3.5 / 6.5 Depth 3.5 M5 5 31.5 Double Yes ~ $25.20
    KHZ 12-10-E 12 M3x0.5 22 3.5 / 6.5 Depth 3.5 M5 10 20.5 Single ~ ~ $19.40
    KHZ 12-10-D 12 M3x0.5 22 3.5 / 6.5 Depth 3.5 M5 10 20.5 Double ~ 34 $21.80
    KHZ 12-10-D-A 12 M3x0.5 22 3.5 / 6.5 Depth 3.5 M5 10 31.5 Double Yes 44 $26.10
    KHZ 20-5-E 20 M5x0.8 36 5.5 / 9 Depth 7 M5 5 24 Single ~ ~ $23.55
    KHZ 20-5-D 20 M5x0.8 36 5.5 / 9 Depth 7 M5 5 24 Double ~ ~ $27.90
    KHZ 20-5-D-A 20 M5x0.8 36 5.5 / 9 Depth 7 M5 5 36 Double Yes ~ $34.85
    KHZ 20-10-E 20 M5x0.8 36 5.5 / 9 Depth 7 M5 10 24 Single ~ 77 $33.12
    KHZ 20-10-D 20 M5x0.8 36 5.5 / 9 Depth 7 M5 10 24 Double ~ ~ $28.80
    KHZ 20-10-D-A 20 M5x0.8 36 5.5 / 9 Depth 7 M5 10 36 Double Yes 108 $35.75
    KHZ 20-20-D 20 M5x0.8 36 5.5 / 9 Depth 7 M5 20 24 Double ~ 103 $30.60
    KHZ 20-20-D-A 20 M5x0.8 36 5.5 / 9 Depth 7 M5 20 36 Double Yes ~ $37.55
    KHZ 20-30-D 20 M5x0.8 36 5.5 / 9 Depth 7 M5 30 24 Double ~ 130 $32.40
    KHZ 20-30-D-A 20 M5x0.8 36 5.5 / 9 Depth 7 M5 30 36 Double Yes 160 $39.35
    KHZ 32-5-E 32 M8x1.25 48 5.5 / 9 Depth 7 G 1/8" 5 30 Single ~ ~ $30.30
    KHZ 32-5-D 32 M8x1.25 48 5.5 / 9 Depth 7 G 1/8" 5 30 Double ~ 130 $38.95
    KHZ 32-5-D-A 32 M8x1.25 48 5.5 / 9 Depth 7 G 1/8" 5 40 Double Yes ~ $47.70
    KHZ 32-10-E 32 M8x1.25 48 5.5 / 9 Depth 7 G 1/8" 10 30 Single ~ 141 $33.45
    KHZ 32-10-D 32 M8x1.25 48 5.5 / 9 Depth 7 G 1/8" 10 30 Double ~ 141 $39.90
    KHZ 32-10-D-A 32 M8x1.25 48 5.5 / 9 Depth 7 G 1/8" 10 40 Double Yes 197 $48.65
    KHZ 32-20-D 32 M8x1.25 48 5.5 / 9 Depth 7 G 1/8" 20 30 Double ~ 180 $41.80
    KHZ 32-20-D-A 32 M8x1.25 48 5.5 / 9 Depth 7 G 1/8" 20 40 Double Yes ~ $50.55
    KHZ 32-30-D 32 M8x1.25 48 5.5 / 9 Depth 7 G 1/8" 30 30 Double ~ 219 $43.70
    KHZ 32-30-D-A 32 M8x1.25 48 5.5 / 9 Depth 7 G 1/8" 30 40 Double Yes 276 $52.45
    * Available sensors are RRK-93 & RRK-F9P.
    See "Sensors, Connectors, and Accessories" section for sensor specifications and offerings.
    + sas-automation.com | 55 Vacuum cup cYLindErS and accESSoriES
    ADZ... Short Stroke cylinder adapter
    • Allows KHZ cylinders to attach to standard
    VLR Arm Extensions and mount in standard
    mounting clamps
    ADZ… Adapter für Kurzhub bzw. Sonderzylinder
    AVI... Vacuum cup adaptor
    • Mounts a vacuum cup / suction cup to a KHZ short stroke cylinder
    • Used to secure parts with edges perpendicular to the mold face
    AVI…Adapter für Vakuumsauger
    AVI…
    Vacuum cuP cYLINDERS and accESSoriES
     Cylinder A B C D E F G Extension Weight (g) Price
    ADZ 14-12 KHZ 12… 25 25 18 6 M12 x 1 M3 22 VLR 14 13 $28.25
    ADZ 20-20 KHZ 20… 38 38 18 6 M17 x 1 M5 36 VLR 20 29 $29.75
    ADZ 20-32 KHZ 32… 45 45 18 6 M17 x 1 M5 48 VLR 20 38 $31.25
    ADZ 30-32 KHZ 32… 45 45 18 6 M27 x 1 M5 48 VLR 30 49 $29.75
     A B C D Weight (g) Price
    AVI 5I-8-3 M5 10 12 M3 x .5 7 $19.13
    AVI 1/8I-16-5 G 1/8" 16 21 M5 x .8 30 $8.50
    AVI 1/8I-16-8 G 1/8" 16 21 M8 x 1.25 29 $9.00
    AVI 1/4I-16-8 G 1/4" 19 26 M8 x 1.25 51 $10.93
     C
    B
    D + H
    ØA
    E
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    SZD... Special cylinder
    • Perfect for securing sides or flexing parts
    • Usually utilized with GSE arms and vacuum cups or GRF
    gripper fingers (not included)
    • Available with or without sensors
    • Double Acting Cylinder
    SZD… Sonderzylinder
    Vacuum cuP cYLINDERS and accESSoriES
    SZS... Special cylinder
    • Perfect for securing sides or flexing parts
    • Usually utilized with GSE arms and vacuum cups or
    GRF gripper fingers (not included)
    • Available with or without sensors
    • Double Acting Cylinder
    Cylinder
    Bore
    A B C D E H (Stroke)
    Sensor
    Capable*
    Weight
    (g)
    Price
    SZD 12-10 12 10 55 81 30 10 10 ~ 76 $112.00
    SZD 12-10-A 12 10 55 81 35 10 10 Yes* 84 $136.80
    SZD 12-20 12 10 55 81 30 10 20 ~ ~ $115.00
    SZD 12-20-A 12 10 55 81 35 10 20 Yes* 98 $126.25
    SZD 20-10 20 14 80 112 37 13 10 ~ ~ $128.25
    SZD 20-10-A 20 14 80 112 47 13 10 Yes* ~ $140.50
    SZD 20-20 20 14 80 112 37 13 20 ~ ~ $131.75
    SZD 20-20-A 20 14 80 112 47 13 20 Yes* 243 $142.75
    SZD 20-30 20 14 80 112 37 13 30 ~ ~ $135.50
    SZD 20-30-A 20 14 80 112 47 13 30 Yes* ~ $145.50
    SZD 20-40 20 14 80 112 37 13 40 ~ 252 $139.00
    SZD 20-40-A 20 14 80 112 47 13 40 Yes* 303 $148.25
    SZD 20-50 20 14 80 112 37 13 50 ~ ~ $142.50
    SZD 20-50-A 20 14 80 112 47 13 50 Yes* 341 $151.00
    SZD 32-10 32 20 120 180 46 16 10 ~ 326 $145.00
    SZD 32-10-A 32 20 120 180 56 16 10 Yes* ~ $142.86
    SZD 32-20 32 20 120 180 46 16 20 ~ 369 $201.22
    SZD 32-20-A 32 20 120 180 56 16 20 Yes* 428 $161.00
    SZD 32-30 32 20 120 180 46 16 30 ~ 422 $154.50
    SZD 32-30-A 32 20 120 180 56 16 30 Yes* ~ $164.25
    SZD 32-40 32 20 120 180 46 16 40 ~ 458 $159.50
    SZD 32-40-A 32 20 120 180 56 16 40 Yes* ~ $167.25
    SZD 32-50 32 20 120 180 46 16 50 ~ 502 $196.40
    SZD 32-50-A 32 20 120 180 56 16 50 Yes* 561 $208.50
    * Available sensors are RRK-93 & RRK-F9P.
    See "Sensors, Connectors, and Accessories" section for sensor specifications and offerings.
    A B C D E
    H
    (Stroke)
    Sensor
    Capable
    Weight (g) Price
    SZS 12-10-12 14 15 56 44 13 10 ~ 88 $88.00
    SZS 12-10-14 A 14 15 56 49 13 10 Yes 116 $116.00
    SZS 12-20-14 14 15 56 54 13 20 ~ 91 $91.10
    SZS 12-20-14 A 14 15 56 59 13 20 Yes 116 $116.00
    SZS 20-10-20 20 19 79 50 16 10 ~ 121 $121.00
    SZS 20-10-20 A 20 19 79 60 16 10 Yes 146 $146.00
    SZS 20-20-20 20 19 79 60 16 20 ~ 126 $125.50
    SZS 20-20-20 A 20 19 79 70 16 20 Yes 135 $135.00
    SZS 20-30-20 20 19 79 70 16 30 ~ 128 $128.00
    SZS 20-30-20 A 20 19 79 80 16 30 Yes 145 $145.00
    SZS 20-40-20 20 19 79 80 16 40 ~ 130 $130.00
    SZS 20-40-20 A 20 19 79 90 16 40 Yes 150 $150.00
    SZS 20-50-20 20 19 79 90 16 50 ~ 134 $133.50
    SZS 20-50-20 A 20 19 79 100 16 50 Yes 143 $142.50
    SZS 32-10-30 30 28 107 60 19 10 ~ ~ $135.00
    SZS 32-10-30 A 30 28 107 70 19 10 Yes ~ $145.50
    SZS 32-20-30 30 28 107 70 19 20 ~ ~ $138.00
    SZS 32-20-30 A 30 28 107 80 19 20 Yes ~ $153.50
    SZS 32-30-30 30 28 107 80 19 30 ~ ~ $141.00
    SZS 32-30-30 A 30 28 107 90 19 30 Yes ~ $155.50
    SZS 32-40-30 30 28 107 90 19 40 ~ ~ $145.00
    SZS 32-40-30 A 30 28 107 100 19 40 Yes ~ $160.50
    SZS 32-50-30 30 28 107 100 19 50 ~ ~ $148.00
    SZS 32-50-30 A 30 28 107 110 19 50 Yes ~ $163.50
    + sas-automation.com | 57
    GAZ... Special cylinder mounting arm
    • Mounts SZS Special Cylinders and KHZ Short
    Stroke Cylinders to our Standard Mounting Clamps
    and Gripper Mounting Arms.
    GAZ… Greifarm für Kurzhub bzw. Sonderzylinder
    Vacuum cup cYLindErS and accESSoriES
    Vacuum cuP cYLINDERS and accESSoriES
    A B C D E L Cylinder
    Weight
    (g)
    Price
    GAZ 12-10-90 10 15 25 90 M3 90 SZD 12 / KHZ 12 18 $22.25
    GAZ 12-14-120 14 15 25 120 M3 120 SZD 12 / KHZ 12 31 $28.69
    GAZ 20-20-150 20 13 59 150 M5 150 SZD 20 / KHZ 20 83 $30.50
    GAZ 32-20-150 20 13 64 150 M5 150 SZD 32 / KHZ 32 88 $36.50
    • Compact design
    • Use SI for high vacuum flow
    when parts are textured or porous
    • Use XI for smooth parts for
    strong vacuume
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    VBH10-66P
    VBH10-66S
    Vacuum GENERatoRS, REGuLatoRS and accESSoriES
    VBH… Vakuumgeneratoren mit Schnellverschlusskupplungen
    • Compact lightweight vacuum generator
    • Built in muffler to reduce noise
    • “S” version comes with NO/NC vacuum switch
    • 6mm one-touch tubing connection
    • Can be used with PNP or NPN
    Vakuumgeneratoren,
    Regulatoren und Zubehör
    VBH…
    VBH... Vacuum Generator with one-touch Fitting
    VCV... Vacuum check Valve
    VCV…Strömungsventil
    • Closes automatically if attached vacuum cups fail to secure the
    part, thus ensuring the efficiency of the remaining cups
    • Inserted between the cup and the mounting arm
    VGI... inline Vacuum Generator
    GFD... ¼ mini Vacuum manifold
    • Integrated three-stage vacuum cartridge - MINI - with extra
    high initial vacuum flow.
    • Large vacuum flow in relation to energy consumption. Good
    for handling porous materials or if surface leakage is present.
    • Recommended for high speed applications.
    • Comes with hardware for mounting directly to SAS aluminum profiles
    * Available Si version only.
    Supply Press
    (Optimal)
    Vacuum
    Pressue
    (Max.)
    Air Consumption Vacuum Flow Weight (g) Price
    VBH 10-66P
    5 bar (72 psi)
    -0.9 bar
    (-13.5 psi)
    28 L/min (1 scfm)
    75 L/min (2.7
    scfm)
    18 $38.03
    VBH 10-66S 66 $121.33
    A B C D E
    Weight
    (g)
    Price
    VCV 1/8 36 13 G 1/8" 6.5 11 9 $35.69
    VCV 1/4 38 18 G1/4" 8.5 11 ~ $29.00
    Vacuum Flow
    Feed
    Pressure MPa
    Air Consumption
    NI/s
    Vacuum flow (NI/s) at different vacuum levels (-kPa)
    Max Vacuum
    (-kPa)
    0 10 20 30 40 50 60 70
    0.4 0.31 1.1 0.57 0.36 0.26 0.18 0.09 – – 60
    0.5 0.38 1.23 0.65 0.46 0.29 0.23 0.15 0.08 0.01 70
    0.6 0.44 1.34 0.73 0.55 0.35 0.23 0.17 0.13 0.08 75
    Evacuation Time
    Feed
    Pressure MPa
    Air Consumption
    NI/s
    Vacuum flow (NI/s) at different vacuum levels (-kPa)
    Max Vacuum
    (-kPa)
    0 10 20 30 40 50 60 70
    0.4 0.31 – 0.12 0.33 0.66 1.1 1.9 – – 60
    0.5 0.38 – 0.11 0.29 0.55 0.9 1.5 2.3 4.6 70
    0.6 0.44 – 0.1 0.25 0.48 0.8 1.3 2 2.9 75
    A B C D
    Supply Pressure
    (Optimal)
    Vacuum Pressure
    (Max.)
    Air
    Consumption
    Price
    VGI 1-6-6 SI 70 15 6 6 6 bar (87 psi) -0.8 bar (-12 psi) 7.1 l/m (.25 scfm) $23.00
    VGI 1-6-6 XI 70 15 6 6 5 bar (72.5 psi) -0.9 bar (-13 psi) 8.6 l/m (.3 scfm) $23.00
    VGI 2-6-6 SI 96 19 6 6 6 bar (87 psi) -0.8 bar (-12 psi) 25.7 l/m (.9 scfm) $29.00
    VGI 2-6-6 XI 96 19 6 6 5 bar (72.5 psi) -0.9 bar (-13 psi) 28.6 l/m (1 scfm) $29.00
    VGI 2-8-8 SI 96 19 8 8 6 bar (87 psi) -0.8 bar (-12 psi) 25.7 l/m (.9 scfm) $29.00
    VGI 2-8-8 XI 96 19 8 8 5 bar (72.5 psi) -0.9 bar (-13 psi) 28.6 l/m (1 scfm) $29.00
    VGI 3-8-12 SI 155 26 8 12 6 bar (87 psi) -0.8 bar (-12 psi) 106 l/m (3.7 scfm) $90.00
    VGI 3-8-12 XI 155 26 8 12 5 bar (72.5 psi) -0.9 bar (-13 psi) 111 l/m (3.9 scfm) $90.00
    Weight (g) Price
    GFD 1/4 MINI Vacuum
    Manifold
    133 $154.50
    + sas-automation.com | 59
    VG-30... Vacuum Generator
    VG-30… Vakuumgeneratoren mit Schnellverschlusskupplungen
    RVC…
    RVUM…
    A
    B
    B
    A
    RVC & RVU... regulator with Quick connector
    RVC & RVU… Regulator mit Schnellwechselverbindungsstücken
    • Compact lightweight air regulator
    • Adjustable pressure range 0.1-0.8 MPa
    • Supply pressure range 0-1MPa
    • Gauge accuracy ±5%
    Vacuum GEnEratorS, rEGuLatorS and accESSoriES
    RC... compact air regulator
    RC... Kompakter Druckluftregler
    • Compact air regulator
    • Maximum inlet pressure of 1.0 MPa
    • Operating temperature range of 5-60°C
    RC…
    Vacuum GENERatoRS, REGuLatoRS and accESSoriES
    • Compact and lightweight
    • Built in muffler to reduce noise
    • PNP vacuum sensing
    VG-30
    Supply Pressure
    (Optimal)
    Vacuum Pressure
    (Max.)
    Air Consumption Vacuum Flow Price
    VG-30 5 bar (72.5 psi) -0.28 bar (-4 psi) 27.5 L/min (.97 scfm) 86 L/min (3.03 scfm) $304.55
    A (Tubing Size) B (Male Thread) Weight (g) Price
    RVC4-M5 4 M5 ~ $38.03
    RVC4-01 4 R 1/8" ~ $43.63
    RVC6-M5 6 M5 ~ $41.07
    RVC6-01 6 R 1/8" ~ $46.67
     A (Tubing Size) B (Tubing Size) Weight (g) Price
    RVUM4-4 4 4 ~ $66.50
    RVUM6-4 6 4 47 $69.53
    RVUM6-6 6 6 ~ $69.53
    Model No. Pipe size Pressure Range (MBars) Pressure Range (psi) Price
    R31-100-0000 Rc 1/8" 0.2~7 2.9~102 $56.00
    R31-100-C000 Rc 1/8" 0.1~3.5 1.5~50.8 $59.73
    R31-100-B000 Rc 1/8" 0.07~0.7 1.0~10.2 $59.73
    R31-200-0000 Rc 1/8" 0.2~7 1~10.2 $56.00
    R31-200-C000 Rc 1/4" 0.1~3.5 1.5~50.8 $59.73
    R31-200-B000 Rc 1/4" 0.07~0.7 1~10.2 $59.73
    GRZ 10-10 GRZ 10-10A GRZ 10-10A1 GRZ 10-10ST GRZ 10-10STC GRZ 10-12 GRZ 10-12A GRZ 10-12C
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    • Single action spring return function
    • Fully compatible with SAS’s modular EOAT/gripper system
    • Available with standard jaws, radiused jaws (KT-Type), standard mounting holes (A-Type), and
    sensor capable jaws (C-Type)
    • In-jaw part sensor does not require adjustment (C-Type only)
    • Only available GRZ 10-10 P and GRZ 10-12 P
    PaRt/SPRuE GRIPPERS, FinGErS and LocatorS
    GRZ…Greifzange (Standard einfachwirkend)
    Greifzangen, Nadelgreifer,
    Greiffinger, Zentrierhilfen
    GRZ 10-6/GRZ 10-8
    Micro Grippers
    Buy with confidence.
    Find a lower price?
    We'll match that price on
    the spot. It's that simple.
    GRZ 20-22/GRZ 20-22 C
    GRZ... Sprue/parts pliers
    A B C D E F G H I J K L M N O P Force (N)
    Sensor
    (Optional)*
    Weight (g) Price
    GRZ 10-6 10 ~ 15 30 12 15 ~ 11 6 M4 M5 ~ ~ ~ 3 8 10 No 8 $105.00
    GRZ 10-8 C 10 ~ 20 40 16 15 ~ 14 8 M6 M5 ~ ~ ~ 4 10 19
    Built in sensor
    - PNP
    25 $198.00
    GRZ 10-10 10 16 25 64 25 12 4 22 21 4.2 M5 ~ ~ ~ 6 13 20 No 55 $129.00
    GRZ 10-10 A 10 16 25 41 25 12 4 22 17 4.2 M5 8 M4 3 6 13 ~ No 38 $52.00
    GRZ 10-10 A1 10 16 25 48 25 12 4 22 19 4.2 M5 8 M4 3 6 13 ~ No ~ $135.50
    GRZ 10-10 C 10 16 25 64 25 12 4 22 21 4.2 M5 ~ ~ ~ 6 13 20 SP1.5/SN1.5 52 $199.25
    GRZ 10-10 KT 10 16 25 64 25 12 4 22 14 4.2 M5 ~ ~ ~ 6 13 20 No 50 $140.00
    GRZ 10-10 P 10 16 25 68 25 12 4 22 22 4.2 M6 ~ ~ ~ 6 13 20 No ~ $190.00
    GRZ 10-10 ST 10 16 25 64 25 12 4 22 21 4.2 M7 ~ ~ ~ 6 13 20 No 16 $138.00
    GRZ 10-10 STC 10 16 25 64 25 12 4 22 21 4.2 M8 ~ ~ ~ 6 13 20 SP1.5/SN1.5 52 $205.00
    A B C D E F G H I J K L M N O P Force (N)
    Sensor
    (Optional)*
    Weight (g) Price
    GRZ 10-12 10 16 25 67 28 12 4 25 21 4.2 M5 ~ ~ ~ 6 16 34 No 66 $149.00
    GRZ 10-12 A 10 16 25 44 28 12 4 25 17 4.2 M5 8 M4 3 6 16 ~ No 47 $145.00
    GRZ 10-12 C 10 16 25 67 28 12 4 25 21 4.2 M5 ~ ~ ~ 6 16 34 SP1.5/SN1.5 63 $145.00
    GRZ 10-12 P 10 16 25 71 28 12 4 25 22 4.2 M5 ~ ~ ~ 6 16 34 No ~ $198.00
    GRZ 10-12 ST 10 16 25 67 28 12 4 25 21 4.2 M5 ~ ~ ~ 6 16 34 No 64 $145.35
    GRZ 10-12 STC 10 16 25 67 28 12 4 25 21 4.2 M5 ~ ~ ~ 6 16 34 SP1.5/SN1.5 61 $215.00
    A B C D E F G H I J K L M N O P Force (N)
    Sensor
    (Optional)*
    Weight (g) Price
    GRZ 20-22 20 28 45 110 45 26 5 40 37 5 G1/8 ~ ~ ~ 16 25 110 No 365 $250.00
    GRZ 20-22 C 20 28 45 110 45 26 5 40 37 5 G1/8 ~ ~ ~ 16 25 110 SP1.5/SN1.5 380 $310.00
    GRZ 20-22 KTC 20 28 45 110 45 26 5 40 37 5 G1/8 ~ ~ ~ 16 25 110 SP1.5/SN1.5 168 $367.45
    GRZ “C” style gripper includes sensor. Customer must choose sensor type: NPN or PNP
    + sas-automation.com | 61
    GRZ 20-16 GRZ 20-16C GRZ 20-16CT GRZ 20-16KTC GRZ 20-16L GRZ 20-16LC GRZ 20-16LCT
    GRZ... Sprue/parts pliers (continued)
    • Bullet nose design for jaw spring protection
    • Single action spring return function
    • Fully compatible with SAS’s modular EOAT/gripper system
    • Available with standard jaws, radiused jaws (KT-Type), standard
    mounting holes (A-Type), aggressive saw teeth (S-Type), and
    sensor capable jaws (C-Type)
    • In-jaw part sensor does not require adjustment (C-Type only)
    • T type has knurled teeth in the jaws
    • RT-Type has knurled teeth in the jaws without holes, allowing for
    a larger gripping surface
    • Now with interchangeable Jaw Kits
    GRZ…Greifzange (Standard einfachwirkend)
    PaRt/SPRuE GRIPPERS, FinGErS and LocatorS
    part/SpruE GrippErS, FinGErS and LocatorS
    A B C D E F G H Force (N)
    Sensor
    (Optional)*
    Weight (g) Price
    GRZ 20-16 20 25 32 73 24 23 G 1/8" ~ ~ ~ 13 25 65 No 141 $176.50
    GRZ 20-16 T 20 25 32 73 25 23 G 1/8" ~ ~ ~ 13 25 65 No 143 $191.50
    GRZ 20-16 A 20 25 32 47 27 8 G 1/8" 16 16 M5 13 25 ~ ~ 128 $173.25
    GRZ 20-16 C 20 25 32 73 23 21 G 1/8" ~ ~ ~ 13 25 65 SP1.5/SN1.5 63 $254.00
    GRZ 20-16 CT 20 25 32 73 23 21 G 1/8" ~ ~ ~ 13 25 65 SP1.5/SN1.5 166 $269.00
    GRZ 20-16 KT 20 25 32 73 23 23 G 1/8" ~ ~ ~ 13 25 65 No 149 $205.00
    GRZ 20-16 KTC 20 25 32 73 23 21 G 1/8" ~ ~ ~ 13 25 65 SP1.5/SN1.5 165 $259.00
    GRZ 20-16 L 20 25 32 105 39 37 G 1/8" ~ ~ ~ 13 25 42 No 162 $219.00
    GRZ 20-16 LT 20 25 32 105 39 37 G 1/8" ~ ~ ~ 13 25 42 No 219 $234.00
    GRZ 20-16 LC 20 25 32 105 37 32 G 1/8" ~ ~ ~ 13 25 42 SP1.5/SN1.5 128 $349.95
    GRZ 20-16 LCT 20 25 32 105 37 32 G 1/8" ~ ~ ~ 13 25 42 SP1.5/SN1.5 157 $364.95
    GRZ 20-16 LST 20 25 32 105 39 36 G 1/8" ~ ~ ~ 13 25 42 No 154 $247.00
    GRZ 20-16 R 20 25 32 73 25 23 G 1/8" ~ ~ ~ 13 25 50 No 169 $155.00
    GRZ 20-16 RT 20 25 32 73 25 23 G 1/8" ~ ~ ~ 13 25 50 No 362 $170.00
    GRZ 20-16 RTC 20 25 32 73 25 21 G 1/8" ~ ~ ~ 13 25 50 SP1.5/SN1.5 177 $249.00
    GRZ 20-16 ST 20 25 32 73 23 23 G 1/8" ~ ~ ~ 13 25 50 No 46 $182.90
    GRZ 20-16 STC 20 25 32 73 23 21 G 1/8" ~ ~ ~ 13 25 50 SP1.5/SN1.5 170 $254.00
    GRZ “C” style gripper includes sensor. Customer must choose sensor type: NPN or PNP
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    GRZ 32-30
    GRZ 32
    GRZ... Sprue/parts pliers (continued)
    • Double action function
    • Fully compatible with SAS’s modular EOAT/gripper system
    • Available with standard jaws and sensor capable jaws (C-Type)
    • In-jaw part sensor does not require adjustment (C-type)
    • E-type offers 30mm slide cylinder for hard to reach sprues
    PaRt/SPRuE GRIPPERS, FinGErS and LocatorS
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    2-Zangenbacken
    GRZ... Jaw Kits
    • Comprised of one jaw, one spring, and one jaw screw
    • Can easily configure and interchange jaw types of the
    same size sprue plier, allowing easy adaptation to any
    gripping requirements
    • MTL “Medium Thread Locker” required
    • Customer must choose sensor type NPN or PNP
    • GRZ 20-16 C includes with sensor
    • GRZ 20-16 LC includes with sensor
    GRZ…Greifzange (Standard einfachwirkend)
    A B C D E F G H I Force (N) Sensor (Optional)* Weight (g) Price
    GRZ 32 20 12 30 33 127 1 G 1/8" M5 50 340 ~ 681 $311.50
    GRZ 32 C 20 12 30 33 127 1 G 1/8" M5 50 340 SP 1.5 / SN 1.5 699 $349.00
    ØA B C D E F G Force (N) Sensor (Optional)* Weight (g) Price
    GRZ 32-30 E 20 9 20 36 158 G 1/8" 52 340 ~ 1,626 $750.00
    GRZ 32-30 EC 20 9 20 36 158 G 1/8" 52 340 SP 1.5 / SN 1.5 ~ $871.24
    * See "Sensors, Connectors, and Accessories" section for sensor specifications and offerings.
    Jaw Kit
    Weight
    (g)
    Price
    GRZ 10-10 Jaw Kit ~ $48.00
    GRZ 10-10 A Jaw Kit ~ $47.00
    GRZ 10-10 A1 Jaw Kit 42 $52.00
    GRZ 10-10 C Jaw Kit ~ $90.00
    GRZ 10-10 KT Jaw Kit ~ $59.21
    GRZ 20-16 Jaw Kit 40 $63.00
    GRZ 20-16 A Jaw Kit 32 $62.00
    GRZ 20-16 C Jaw Kit 63 $135.00
    GRZ 20-16 KT Jaw Kit 43 $70.00
    GRZ 20-16 L Jaw Kit 52 $85.00
    GRZ 20-16 LC Jaw Kit 128 $180.00
    GRZ 20-16 LT Jaw Kit 51 $92.00
    GRZ 20-16 R Jaw Kit 48 $58.00
    GRZ 20-16 RT Jaw Kit 47 $60.00
    GRZ 20-16 T Jaw Kit 40 $68.00
    Size Description Price
    ASC-22 22ml High-Temperature Grease with PTFE $8.50
    MTL-10 10ml Medium Threadlocker $26.00
    + sas-automation.com | 63
    GRF-95
    GRF-35
    GRF-90
    GRF... Gripper Finger (Spring return)
    • Finger claw that securely flips & reaches around the part
    • Especially designed for difficult part-removal applications
    • Pneumatically single acting, spring return function
    • Extendable for longer reach using VLR Arm Extensions
    • Fully compatible with SAS’s modular EOAT gripper system
    • Specially designed to flip and secure thin edges
    • Normally is backed-up with our ANS finger guide
    • Pneumatically single acting, spring return function
    • Extendable for longer reach using VLR Arm Extensions
    • Fully compatible with SAS’s modular EOAT gripper system
    • Our popular gripper finger solution to
    secure difficult parts
    • Normally is protected and located with
    our ZTS and backed-up with the ANF
    finger guide.
    • Pneumatically single acting, spring
    return function
    • Extendable for longer reach using VLR
    Arm Extensions
    • Fully compatible with SAS’s modular
    EOAT gripper system
    GRF... Greiffinger (doppelt wirkend)
    GRF…-D Gripper Finger (double acting)
    • Pneumatically Double acting versions of our GRF 20-95, GRF 20-90, and GRF 20-35
    • GRF 20-95 D secures difficult parts
    • GRF 20-35 D finger claw flips and securely reaches around part
    • GRF 20-90 D is specially designed to flip and secure thin edges
    • Fully compatible with SAS’s modular gripper system
    GRF…-D
    PaRt/SPRuE GRIPPERS, FinGErS and LocatorS
    part/SpruE GrippErS, FinGErS and LocatorS
    GRF…-D Greiffinger (doppelt wirkend)
     A B C D E (Degrees) F Force (N)
    Weight
    (g)
    Price
    GRF 14-95 14 19 77 M12 x 1 95 M5 16 30 $170.00
    GRF 20-95 20 20 95 M17 x 1 95 G 1/8" 42 61 $246.29
    GRF 30-95 30 29 137 M27 x 1 95 G 1/8" 120 204 $261.49
     A B C D E (Degrees) F Force (N)
    Weight
    (g)
    Price
    GRF 14-35 14 18.5 84 M12 x 1 35 G 1/8" 25 30 $135.00
    GRF 20-35 20 23 105 M17 x 1 35 G 1/8" 55 102 $239.00
    GRF 30-35 30 34 142 M27 x 1 35 G 1/8" 190 207 $269.00
     A B C D E (Degrees) F G
    Weight
    (g)
    Price
    GRF 20-35 D 20 20 104 25 35 M5 30 102 $195.00
    GRF 20-90 D 20 11 92 25 90 M5 30 94 $197.50
    GRF 20-95 D 20 23 104 25 95 M5 30 97 $220.00
     A B C D E (Degrees) F Force (N) Weight (g) Price
    GRF 14-90 14 5 72 M12 x 1 90 M5 20 28 $154.12
    GRF 20-90 20 7 83 M17 x 1 90 G 1/8" 95 58 $275.75
    GRF 30-90 30 11 124 M27 x 1 90 G 1/8" 220 205 $278.00
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    GRW... Gripper Finger (Spring return)
    GRW... Greiffinger (einfach wirkend)
    • Finger claw that flips and grips securely around the part
    • Especially designed for difficult part-removal applications
    • Pneumatically single acting, spring return function
    • Extendable for longer reach using VLR Arm Extensions
    • Fully compatible with SAS’s modular EOAT gripper system
    Buy with confidence.
    Find a lower price?
    We'll match that price on
    the spot. It's that simple.
    PaRt/SPRuE GRIPPERS, FinGErS and LocatorS
    VLR... arm Extension
    • Extends GRF and GRW gripper fingers
    • Attaches to ADZ and ADG cylinder adapters and to ZTB locators
    • Tightening hole for securing connection to mating parts
    VLR… Verlängerungsrohr
     A B C D E (Degrees F Force (N)
    Weight
    (g)
    Price
    GRW 20-35 20 20 85 M17 x 1 35 G 1/8" 50 62 $259.00
    GRW 30-35 30 34 123 M27 x 1 35 G 1/8" 160 203 $269.00
     A B C
    Weight
    (g)
    Price
    VLR 10-90 10 M8 x 1 90 9 $6.75
    VLR 14-120 14 M12 x 1 120 19 $6.75
    VLR 20-150 20 M17 x 1 150 46 $8.75
    VLR 30-200 30 M27 x 1 200 94 $14.00
    + sas-automation.com | 65
    ANF
    ANS
    ZTS
    ZTS/ANS/ANF... delrin Finger accessories
    • Aligns part to finger
    • Protects both part and finger
    • Sensored Version (C-Type) detects actuation of finger
    ZTS/ANS/ANF… Zentrierstück/Anschlagstück
    • Used with GRF…-90 to back up the finger for a firm mechanical grip
    • Made of delrin to protect part
    • Used as a finger backup and locator
    • Made of delrin to protect part
    ZTB... delrin Locator pin
    • Aligns and locates EOAT to parts
    • Clamps directly into standard mounting clamps and mates to
    VLR Arm Extensions
    • Tightening hole for secure connection to VLR’s
    part/SpruE GrippErS, FinGErS and LocatorS
    PaRt/SPRuE GRIPPERS, FinGErS and LocatorS
    ZTB… Zentnerbolzen
     A B C D E
    Gripper
    Finger
    Weight (g) Price
    ANS 14 14 19 23 31 10 GRF 14-95 10 $23.10
    ANS 20 20 25 25 38 10 GRF 20-90 17 $25.25
    ANS 20 D 25 32 25 47 10 GRF 20-90 D 24 $25.25
    ANS 30 30 38 38 57 11 GRF 30-90 30 $29.00
    A B C D E Gripper Finger Weight (g) Price
    ANF 14 14 22 10 42 25 GRF 14-95 13 $31.00
    ANF 20 20 32 13 51 30 GRF 20-95 / GRW 20-35 26 $35.00
    ANF 30 30 38 19 66 42 GRF 30-95 / GRW 30-35 52 $39.75
     A B C D Extension Weight (g) Price
    ZTB 10 50 40 M8 x 1 10 VLR 10-L 4 $19.00
    ZTB 14 110 95 M12 x 1 14 VLR 14-L 19 $20.00
    ZTB 20 110 95 M17 x 1 20 VLR 20-L 44 $21.00
    ZTB 30 100 85 M27 x 1 30 VLR 30-L 91 $24.00
     A B C D E
    Gripper
    Finger
    Weight (g) Price
    ZTS 14 14 25 35 17 27 GRF 14-95 13 $22.45
    ZTS 20-95 20 32 37 22 29 GRF 20-95 21 $24.55
    ZTS 20-95 C* 20 32 37 22 29 GRF 20-95 65 $59.95
    ZTS 30-95 30 45 65 32 53 GRF 30-95 84 $53.05
    * See "Sensors, Connectors, and Accessories" section for sensor specifications and
    offerings.
     ØA
    D
    C B
    G
    H
    ØE OPEN
    ØF CLOSED
    I
    E
    E
    ØD
    A
    B
    C
    F
    G
    ØH
    ØI
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    IDG... internal diameter Gripper
    IDG 16...
    Features
    • Single acting spring return internal diameter gripper.
    • 2 ID ranges with the same body; secures 26-32mm and 32-
    38mm.
    • Requires one compressed air line; spring return.
    • Extremely strong for its size -- jaws exert 40 N force at 6 bar.
    • Ø1/8” Neoprene rubber cord stock inserts ensure a secure
    grip – and can be replaced at low cost. Other elastomers can
    be used and are commercially available.
    • Nose adapter can easily be customized for locating or part
    stabilization.
    The IDG grips and releases on command and is highly
    recommended for manipulating breakable parts as well as
    heavy parts. Unlike standard clamps, the IDG distributes force
    evenly over the entire contact area which is why they are most
    often used for irregular shaped parts.
    The IDG is a cost effective solution when compared to bladder
    grippers and automated or magnetic clamps.
    PaRt/SPRuE GRIPPERS, FinGErS and LocatorS
    SLL... Spring Loaded Locator
    • Provides accuracy of +/- .02mm
    • Sized to fit your End-of-Arm Tool robot and mold
    • Locators can dock on existing mold locators
    • Custom lengths, strokes and diameters available
    SLL...Gefederter Andockstift
    IDG 16...Innengreifer
    A B C D E F G H I Weight (g) Price
    SLL 10-15 112 44 49 40 29 15 7 4.7 7 ~ $420.00
    SLL 16-30 152 80 74 48 38 30 11 9.3 13 486 $550.00
    A B C D E F G H I Weight Lbs. Weight (g) Price
    IDG 16-26-32 22 10 40 131 34 25 8 M17x1 M5 0.250 189 $429.00
    IDG 16-32-38 22 10 40 131 40 31 8 M17x1 M5 0.318 ~ $498.00
    + sas-automation.com | 67
    GRN... needle Gripper
    • Ideal for gripping fabric or mesh
    • Normally used in insert molding applications
    • Adjustable needle length
    • Replacement needles also available
    GRN… Nadelgreifer
    part/SpruE GrippErS, FinGErS and LocatorS
    PaRt/SPRuE GRIPPERS, FinGErS and LocatorS
     A B C D E F
    Air Cons. (cm3/
    Hub)
    Working Air
    Pres. (Bar)
    Sensor (optional) Weight (g) Price
    GRN 12-10 X 55 56 41 0-5 ~ ~ 1.13 6 bar (90 psi) RRK-93/RRK-F9P 132 $320.00
    GRN 12-10-14 57 55 77 0-5 14 40 1.13 6 bar (90 psi) RRK-93/RRK-F9P 232 $359.00
    GRN 12-10-20 25 112 55 0-3 20 50 1.13 6 bar (90 psi) RRK-93/RRK-F9P 294 $395.00
    GRN 12-10 CN 26 42 32 0-5 25 34 1.13 6 bar (90 psi) RRK-93/RRK-F9P ~ $369.00
    GRN 12-10-20 LP 25 80 41 0-5 20 40 1.13 6 bar (90 psi) ~ ~ $554.68
    GRN 12-10 SL 25 81 40 0-5 56 84 1.13 6 bar (90 psi) ~ 722 $499.00
    * See “Sensors, Connectors, and Accessories” section for sensor specifications and offerings.
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    GRM... magnetic Gripper
    GRM...Magnetgreifer
    Magnetic Grippers are ideal for use where vacuum cups and grippers are typically used for lifting
    and moving steel sheets, blanks, stamped parts and complete assemblies.
    Applications and Benefits:
    • Automated press to press transfer systems
    • Robotic “Pick & Place”
    • Manual and automated machine loading/unloading
    • Outlasts vacuum cups in most applications
    • Grasps odd shaped or perforated parts
    • Increases production and reduces shop air costs
    • Designed for long, maintenance-free operation
    • Operates effectively in any orientation
    • Will not drop parts if system air-loss occurs
    • De-stacks without double-blanking when the appropriate magnet is selected for the application
    • Reduces noise
    • Maximum operating temperature 140°F (60°C)
    Low Profile Magnetic Grippers:
    The Magnetic Gripper is designed to directly replace vacuum cups with minor tooling and valving
    adjustments. Powerful Rare Earth magnets positively hold the parts during transfer, greatly reducing
    the chance of slipping and shifting of your part due to oily coatings. An optional “low-skid” boot is also
    available to increase grip on parts during transfer. A short burst of shop air pressure is applied in order
    to release parts. To pick-up or grip parts, the air pressure must be exhausted to the atmosphere.
    • Powerful Rare Earth magnet positively holds parts - no dropping or shifting in the event of air loss
    • Can be used with standard SAS parts and framework
    • Lightweight, low-profile design for minimal die clearance
    • Instantaneous pick-up and release
    • Uses up to 95% less air than vacuum cups
    NOTE:
    Supply air pressure must not exceed 60 PSI at the Magnetic Gripper inlet. Operating at pressures above
    60 PSI will lead to premature failure of the unit. Air must be clean, dry and non-lubricated. Air pressure
    should never be applied to the Magnetic Gripper during a transfer cycle. This will cause the loss of a
    part. Apply air when in position to release the part. In some applications, air may need to be applied to
    retract the magnet before contacting the part. If the magnet “reach out” lifts the part from the guides
    before making contact, causing loss of part position, apply air to the Magnetic Gripper prior to lifting the
    part.
    PaRt/SPRuE GRIPPERS, FinGErS and LocatorS
    Low Skid Boots protect against marring of class “A” blanks while
    extending the life of the magnet by protecting the face from wear. In
    many applications the boots and pads also assist in keeping parts from
    shifting under shear in transport. The boots cover the edge of the cup for
    complete blank protection while the pads cover the face of the cup for
    increased wear protection to extend the life of the magnet.
    GRB… Black urethane Boot
    Part # A B C D E Weight (g) Price
    GRM 38-3/8 38 G3/8" 74 32 85 269 $ 282.00
    GRM 76-3/8 76 G3/8" 76 32 85 ~ $ 282.00
    GRM 127-3/8 127 G3/8" 111 50 122 ~ $ 541.00
    Part # Non-Skid Covers Weight (g) Price
    GRB 38 Black Urethane Boot for GRM 38-3/8 13 $21.00
    GRB 76 Black Urethane Boot for GRM 76-3/8 ~ $21.00
    GRB 127 Black Urethane Boot for GRM 127-3/8 ~ $21.00
    + sas-automation.com | 69
    ISC MPS... indexing cylinder
    • Allows for indexing motion on linear bearings
    • Sensors available
    • Double acting
    ISC MPS… Indexzylinder
    RC…-S rotary cylinder
    • Allows for 0-180o rotational motion
    • Adjustable angle with cushioned shocks
    • Sensors available
    • Double acting
    RC…-S Drehzylinder
    ISC 8... indexing cylinder
    • Allows for indexing motion on linear
    bearings
    • Sensors available
    • Adjustable end stop
    • Double acting
    ISC 8… Indexzylinder
    Back Left side Top Right side Bottom
    Top Left side Front Right side Bottom
    Side Top Front
    RC…-S
    Kurzhubzylinder und Parellelgreifer
    StroKinG pnEumatic cYLindErS and paraLLEL GrippErS
    StRokING PNEumatIc cYLINDERS and paraLLEL GrippErS
    ISC 8…
     A (Stroke) B C D E F G Cylinder Bore Sensor (Optional)* Price
    ISC 8-10 10 49 56 28 25 2 4 8 RRK-93/ RRK-F9P $371.23
    ISC 8-20 20 54 61 30 25 2 4 8 RRK-93/ RRK-F9P $383.76
    ISC 8-30 30 65 72 20 40 3 4 8 RRK-93/ RRK-F9P $419.48
    ISC 8-40 40 83 90 28 50 3 4 8 RRK-93/ RRK-F9P $451.58
    ISC 8-50 50 101 108 23 38 4 6 8 RRK-93/ RRK-F9P $462.60
     A (Stroke) B C D Cylinder Bore Sensor (Optional)* Price
    ISC MPS-1-1 13 38 46 19 11.1 RRK-OHSP-017 $387.00
    ISC MPS-1-2 25 51 58 32 11.1 RRK-OHSP-017 $405.00
    ISC MPS-1-3 38 64 71 38 11.1 RRK-OHSP-017 $324.00
    ISC MPS-1-4 51 76 84 51 11.1 RRK-OHSP-017 $331.00
     A B C D E F G H J K L Sensor (Optional)* Weight (g) Price
    RC 10-S 110 50 47 60 27 45° M5 M5 6.8 / 11 M5 32 RRK-93/ RRK-F9P ~ $344.46
    RC 20-S 142 65 54 76 34 45° M6 M6 8.6 / 14 M5 43 RRK-93/ RRK-F9P ~ $393.12
    RC 30-S 152 70 57 84 37 45° M6 M6 8.6 / 14 G 1/8" 48 RRK-93/ RRK-F9P ~ $426.84
    RC 50-S 183 80 66 100 50 45° M8 M8 10.5 / 18 G 1/8" 55 RRK-93/ RRK-F9P 960 $485.52
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    RC…-RR rotary cylinder
    • Allows for 0-180° rotational motion
    • Adjustable angle with cushioned shocks
    • Sensors available
    • Double acting
    RC…-RR
    RC…-RR Drehzylinder
    Top Side Bottom
    * See "Sensors, Connectors, and Accessories" section for sensor specifications and offerings.
    * See "Sensors, Connectors, and Accessories" section for sensor specifications and offerings.
    Top Side
    Front
    Bottom
    StRokING PNEumatIc cYLINDERS and paraLLEL GrippErS
    PGR... parallel Gripper
    PRG… Parallelgreifer (doppelt wirkend)
    • Double acting
    • Sensors available
    • Tapped holes in gripper arms allow for easy jaw attachment
    • Compatible with standard mounting clamps when combined with the
    appropriate ADG and a VLR Arm Extension
    * See "Sensors, Connectors, and Accessories" section for sensor specifications and offerings.
     Range A B C D E F G H J K L M Sensor (Optional)* Price
    RC 12.7-RR 0-180° 57 81 57 32 32 25 6 51 ~ M5 M3 M3 RRK-OISP-015 $802.50
    RC 19.1-RR 0-180° 86 109 86 57 57 53 6 78 78 M5 M4 M4 RRK-OISP-015 $915.00
     Range A B C D E F G H J K L M Sensor (Optional)* Sensor Mounting Kit Price
    RC 25.4-RR 0-180° 64 117 64 64 102 M6 44 13 64 64 M6 G1/8" RRK-OISP-014 RRK-OSMK-024 $1,222.50
    RC 31.8-RR 0-180° 89 169 70 70 114 M8 54 16 76 76 M8 G1/8" RRK-OISP-014 RRK-OSMK-024 $1,642.50
     Photo A B C D E F G H J L M N (Air) O P Force (N) Sensor (Optional)* Price
    PGR 25 A 26 18 34 17 11 10 4 10 15 M3 M4 M3 20 M3 35 IRK 4 $249.20
    PGR 32 B 32 22 43 22 14 12 5 10 19 M3 M5 M5 25 M4 61 IRK 4 $254.44
    PGR 40 C 40 26 51 28 16 16 6 10 24 M3 M5 M5 32 M4 110 IRK 4 $264.38
    + sas-automation.com | 71 StroKinG pnEumatic cYLindErS and paraLLEL GrippErS
    Bottom
    PGR…S parallel Gripper
    PGR…S Parallelgreifer (doppelt wirkend)
    PGR…S
    • Double acting
    • Sensors available
    • Tapped holes in gripper arms allow for easy jaw attachment
    • Compatible with standard mounting clamps when combined with the
    appropriate ADG and a VLR Arm Extension
    * See "Sensors, Connectors, and Accessories" section for sensor specifications and offerings.
    Front Right Side
    Left Side
    PRG 1-R PRG (5/10)-R
    PGR…-R parallel Gripper
    PGR…-R Parallelgreifer
    • Double acting
    • Sensors available
    • Tapped holes in gripper arms allow for easy jaw
    attachment
    • Compatible with standard mounting clamps when
    combined with the appropriate ADG and a VLR Arm
    Extension
    Top
    Front
    G=OPEN
    H=CLOSED
    G=OPEN
    H=CLOSED
    Bottom
    Front Rightside
    Bottom
    StRokING PNEumatIc cYLINDERS and paraLLEL GrippErS
     Photo A B C D E F G H J K (Air) L M Sensor (Optional)* Kraft (N) Sensor Mounting Kit Weight (g) Price
    PGR 1-R A 20 16 23 7 8 16 19 18 M2 M3 M2 12 ~ 36 ~ ~ $531.00
    PGR 5-R B 29 25 37 8 14 24 28 24 M3 M5 M3 ~ RRK-OISP-013 156 RRK-OSMK-001 ~ $504.00
    PGR 10-R C 38 32 37 8 16 32 19 12 M4 M5 M3 ~ RRK-OISP-013 178 RRK-OSMK-002 130 $576.00
     A B C D E F G H J K L M N
    O
    (Air)
    P Q R
    Force
    (N)
    Sensor (Optional)*
    Weight
    (g)
    Price
    PGR 10-S 57 16 29 12 11 16 12 18 6 5 M3 M3 M3 M3 15 11 M2.5 17 RRK-Y59B/ RRK-Y7P 55 $275.47
    PGR 16-S 67 24 38 15 16 24 15 22 7 8 M4 M4 M4 M5 21 15 M3 40 RRK-Y59B/ RRK-Y7P 120 $283.32
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    LPG... Large parallel Gripper
    • Double acting
    • Sensors available
    • Tapped holes in gripper arms allow for easy jaw attachment
    • Compatible with standard mounting clamps when combined with the
    appropriate ADG and a VLR Arm Extension
    Top Front Rightside
     Top Front Rightside Bottom
    Leftside Front Top Back
    * See "Sensors, Connectors, and Accessories" section for sensor specifications and offerings.
    * See "Sensors, Connectors, and Accessories" section for sensor specifications and offerings.
    * See "Sensors, Connectors, and Accessories" section for sensor specifications and offerings.
    ADG... adapters for parallel Gripper
    • Allows PGR and LPG grippers to attach to standard VLR
    Arm Extensions and mount in standard mounting clamps
    ADG… Adapter für Parallelgreifer
    StRokING PNEumatIc cYLINDERS and paraLLEL GrippErS
    LPG... Parallelgreifer, gross, doppelt wirkend
     A B C D Force (N) Sensor (Optional)* Weight (g) Price
    LPG 10-10 51 36 76 56 22 RRK-Y59B/ RRK-Y7P 298 $396.00
    LPG 10-25 67 52 118 78 22 RRK-Y59B/ RRK-Y7P 377 $432.54
    LPG 10-30 85 70 156 96 22 RRK-Y59B/ RRK-Y7P ~ $439.44
     A B C D Force (N) Sensor (Optional)* Sensor Mounting Kit Price
    LPG RPL-1 45 44 38 19 116 RRK-OHSP-006 RRK-OSMK-008 $297.00
    LPG RPL-2 60 57 44 22 116 RRK-OHSP-006 RRK-OSMK-008 $405.00
     A B C D E F G H J Force (N) Sensor (Optional)* Sensor Mounting Kit Price
    LPG RPW-375-1 56 32 ~ 19 120 95 19 19 M4 400 RRK-OISP-014 RRK-OSMK-010 $918.08
    LPG RPW-375-2 83 57 32 25 187 136 51 16 M5 400 RRK-OISP-014 RRK-OSMK-011 $978.08
     A B C D E F G H J K L Cylinder Ext. Weight (g) Price
    ADG 10-R 30 16 16 6 24 16 ~ 12 2.5 M8 x 1 3.5 PGR 1-R/ PGR 5-R VLR 10… 8 $22.00
    ADG 10-S 30 19 16 6 18 ~ ~ 12 ~ M8 x 1 3.5 PGR 10-S VLR 10… 7 $22.00
    ADG 14-R 40 19 16 6 32 ~ ~ ~ ~ M12 x 1 4.5 PGR 10-R VLR 14… 15 $23.00
    ADG 14-RPL 25 25 16 6 19 ~ ~ 15 ~ M12 x 1 3.5 LPG RPL… VLR 14… 12 $23.00
    ADG 14-S 32 25 16 6 22 ~ ~ 15 ~ M12 x 1 4.5 PGR 16-S VLR 14… 14 $23.00
    ADG 14-25 25 16 16 6 20 ~ ~ ~ ~ M12 x 1 3.5 PGR 25 VLR 14… 9 $16.00
    ADG 14-32 38 19 16 6 25 ~ ~ ~ ~ M12 x 1 4.5 PGR 32 VLR 14… 12 $17.50
    ADG 20-R 66 25 16 6 57 51 32 16 ~ M17 x 1 5.5 LPG RPW-375-… VLR 20… 30 $24.00
    ADG 20-S 80 51 16 6 70 52 36 34 ~ M17 x 1 4.5 LPG 10-… VLR 20… 70 $24.00
    ADG 20-40 45 19 16 6 32 ~ ~ ~ ~ M17 x 1 4.5 PGR 40 VLR 20… 17 $20.25
    + sas-automation.com | 73
    VLR... arm Extension
    • Extends GRF and GRW gripper fingers
    • Attaches to ADZ and ADG cylinder adapters and to ZTB locators
    • Tightening hole for securing connection to mating parts
    VLR… Verlängerungsrohr
    StroKinG pnEumatic cYLindErS and paraLLEL GrippErS
    StRokING PNEumatIc cYLINDERS and paraLLEL GrippErS
    LIA 380-1... instant adhesive
    SPU 3-250... polyurethane Sheet
    • 250x250x3 Polyurethane Sheet
    • Used to adhere to custom gripper jaws to protect workpiece, cut to size
    • Excellent abrasion resistance
    • Durometer 40A
    • Temperature Range: -29° to 85° C (-20° to +185° F)
    • Strong Super Glue for the SPU 3-250
    • Excellent resistance to peeling, impact, and temperature changes
    • Apply to a clean dry surface
     A B C
    Weight
    (g)
    Price
    VLR 10-90 10 M8 x 1 90 9 $6.75
    VLR 14-120 14 M12 x 1 120 19 $6.75
    VLR 20-150 20 M17 x 1 150 46 $8.75
    VLR 30-200 30 M27 x 1 200 94 $14.00
     Price
    LIA 380-1 $68.00
     Price
    SPU 3-250 $78.00
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    DEGatING cuttERS, BLaDES and accESSoriES
    MR20M
    SPRUE CUTTER
    MR-KS 20
    SPRUE CUTTER
    CLAMP
    GLA 20-150
    ELBOW ARM
    GRZ 20-16 C
    GRIPPER PLIER
    WITH SENSOR
    GLA 20-150
    ELBOW ARM
    WSL 20 AL
    LONG ANGLE CLAMP
    KBV 25-25 X
    CROSS JOINT
    CONNECTOR
    X-25/25
    PROFILE
    ADK-25/25Y X
    END CAP
    GPM 2 X
    MOUNTING PLATE
    Sprue Cutter
    Station Degater
    Filmangußschneider, Angußschneider, Schneideinsätze
    + sas-automation.com | 75 dEGatinG cuttErS, BLadES and accESSoriES
    MR... Sprue cutter
    MR…Angussschneidzange
    MR...
    DEGatING cuttERS, BLaDES and accESSoriES
    ME... Sprue cutter
    • Separate ports for cutter slide and blade
    activation
    • Slide function moves blades flush to part
    • Blades sold separately
    ME… Angussschneidzange mit Hub (Schneideinsatz drehbar)
    * Soft Plastics are PP & PE.
    • Automatic Type is fixture
    mountable
    • Hand operated features a
    safety lever
    • Standard and special blades
    available (see Nip-It! section
    for Type-I blade information)
    *Blades sold separately
    Handheld
    Cutting Capacity A B C
    Weight
    (g)
    Air Consumption
    (cm³/ stroke)
    Working Air
    Pressure (bars)
    Blade Category Weight (g) Price
    MR10
    Soft Plastic ø 5
    36 124
    G 1/4"
    150 116 5~6 I 248 $173.00
    Hard Plastic ø 4 G 1/4"
    MR20
    Soft Plastic ø 7
    45 140
    G 1/4"
    260 230 5~6 I 477 $155.00
    Hard Plastic ø 5 G 1/4"
    MR30A
    Soft Plastic ø 10
    56 176
    G 1/4"
    460 584 5~6 I 707 $229.00
    Hard Plastic ø 6.5 G 1/4"
    MR50FK
    Soft Plastic ø 12
    75 197 G 1/4" 1040 1100 5~6 I 1176 $459.61
    Hard Plastic ø 6.5
    MP35A
    Soft Plastic ø 13
    56 249 G 1/4" 790 956 5~6
    I
    1061 $229.70
    Hard Plastic ø 6.5 I
    Automatic
    Cutting Capacity A B C
    Weight
    (g)
    Air Consumption
    (cm³/ stroke)
    Working Air
    Pressure (bars)
    Blade Category Weight (g) Price
    MR3M Soft Plastic ø 1 20 112 G 1/4" 60 35 4~5 I 109 $174.79
    MR5M Soft Plastic ø 2 30 103 G 1/4" 100 64 4~5 I ~ $169.58
    MR7M Soft Plastic ø 3 30 132 G 1/4" 110 116 4~5 I 152 $169.58
    MR10M
    Soft Plastic ø 5
    36 124
    G 1/4"
    150 116 5~6 I 197 $149.00
    Hard Plastic ø 4 G 1/4"
    MR20M
    Soft Plastic ø 7
    45 140
    G 1/4"
    260 230 5~6 I 352 $149.50
    Hard Plastic ø 5 G 1/4"
    MR30AM
    Soft Plastic ø 10
    56 176
    G 1/4"
    460 584 5~6 I 564 $179.00
    Hard Plastic ø 6.5 G 1/4"
    MR50FM
    Soft Plastic ø 12
    75 197
    G 1/4"
    1040 1100 5~6 I 1176 $459.61
    Hard Plastic ø 6.5 G 1/4"
     A B C D E F G Stroke
    Blade
    Category
    Max. Sprue
    Dia.
    Weight (g) Price
    ME 3 77 4 71 20 14 21 M3 3 II 1 ~ $178.00
    ME 5 79 4 78 29 22 29 M3 3 II 1.2 331 $199.00
    ME 10 102 4 90 35 26 36 M3 3 II 2.5 539 $239.17
    ME 20 116 4 104 44 26 36 M4 5 II 4.5 ~ $259.00
    ME 30 149 4 131 56 26 50 M4 5 II 6 1634 $389.00
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    ML... Slide & cut type cutter
    ML… Angussschneider mit Schub- & `Schneidefunktion
    • Separate Ports for cutter slide and blade activation
    • Slide function moves blades flush to part
    • Utilizes a wider variety of blades than the ME cutter
    • Only one air circuit is needed when Pneumatic Timing Unit
    (TU-01) is used
    • Blades sold separately
    Side Front Bottom
    * Soft Plastics are PP & PE
    ** Hard Plastics are ABS, Polycarbonates, Acrylic resin, POM & PS
    DEGatING cuttERS, BLaDES and accESSoriES
    *Blades sold separately
    Cutter Body Cutting Capacity Weight(g)
    Air Consumption (cm³/
    stroke)
    Working Air
    Pressure (bars)
    Blade Category Weight (g) Price
    ML- 10
    Soft Plastic ø 5
    Hard Plastic ø 4
    340 136 4~5 I ~ $264.73
    ML- 20
    Soft Plastic ø 7
    Hard Plastic ø 5
    500 250 5~6 I 579 $305.43
    ML- 30
    Soft Plastic ø 10
    Hard Plastic ø 6.5
    870 634 5~6 I 977 $407.37
    A B C D E F G H I J K L M N O P R S T U V
    ML- 10 128 35 7 36 31 63 10 8 26 11 31 17 M3 35 9 4 19 71 18 16 41
    ML- 20 143 44 9 45 31 64 10 8 26 11 36 17 M4 44 12 4 26 79 24 23 41
    ML- 30 184 55 15 56 33 76 10 8 26 14 38 24 M4 55 17 4 50 123 34 18 43
    + sas-automation.com | 77
    SN... pull & cut type cutter
    SN… Schneidwerkzeughalter einfahrend
    • Body Strokes In
    • Blade Holder can be rotated 90° in either
    direction (excluding SN-3)
    • Adjustable travel from 0-5mm
    • Separate Ports for cutter slide and blade
    activation
    • Only one air circuit is needed when Pneumatic
    Timing Unit (TU-01) is used
    • Blades sold separately
    * Hard Plastics are ABS, Polycarbonates, Acrylic resin, POM & PS
    SNP... push & cut type cutter
    SNP…Schneidwerkzeughalter ausfahrend
    • Body Strokes Out
    • Blade Holder can be rotated 90° in either
    direction (excluding SN-3)
    • Adjustable travel from 0-5mm
    • Separate Ports for cutter slide and blade
    activation
    • Only one air circuit is needed when Pneumatic
    Timing Unit (TU-01) is used
    • Blades sold separately
    * Hard Plastics are ABS, Polycarbonates, Acrylic resin, POM & PS
    dEGatinG cuttErS, BLadES and accESSoriES
    DEGatING cuttERS, BLaDES and accESSoriES
    *Blades sold separately
    Cutter Body Cutting Capacity Weight(g)
    Air Consumption
    (cm³/ stroke)
    Working Air
    Pressure (bars)
    Blade
    Category
    Price
    SN- 3 Hard Plastic ø 2 228 46 4~5 V $235.75
    SN- 5 Hard Plastic ø 3 220 68 5~6 V $241.48
    SN- 10 Hard Plastic ø 4 379 117 4~5 V $264.45
    SN- 20 Hard Plastic ø 5 711 204 5~6 V $329.83
    Cutter Body A B C D E F G H I J K L M N
    SN- 3 59 23 80 65 31 40 5 43 M4 24 25 7 12 37
    SN- 5 63 28 84 69 34 44 5 43 M4 24 26 7 14 40
    SN- 10 70 33 92 75 38 48 5 49 M4 27 27 9 18 45
    SN- 20 82 42 110 90 46 59 5 58 M4 35 28 12 22 58
    Cutter Body Cutting Capacity Weight(g)
    Air Consumption (cm³/
    stroke)
    Working Air
    Pressure (bars)
    Blade
    Category
    Price
    SNP- 3 Hard Plastic ø 2 170 46 4~5 VI $235.75
    SNP- 5 Hard Plastic ø 3 220 68 5~6 VI $241.48
    SNP- 10 Hard Plastic ø 4 376 117 4~5 VI $264.45
    SNP- 20 Hard Plastic ø 5 711 204 5~6 VI $299.00
    Cutter Body A B C D E F G H I J K L M N
    SNP- 3 59 23 75 65 31 40 5 43 M4 24 25 7 12 37
    SNP- 5 63 28 79 69 34 44 5 43 M4 24 26 7 14 40
    SNP- 10 70 33 87 75 38 48 5 49 M4 27 27 9 18 45
    SNP- 20 82 42 105 90 46 59 5 58 M4 35 28 12 22 58
    P
    P
    ?
    ?
    ?
    ?
    ???????? ?????
    ????
    ?
    ?
    ? ?
    ?
    ?
    ?
    ????
    ????
    ??????
    ?????
    ?
    ??????? ???????? ??? ???
    ??? ????? ?? ??? ??????
    ?
    ???????????????????????????
    ??????????????????????????????????
    ?????????????????? ?????????
    ?
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    MER... tilt & cut type cutter
    MER... Schneidwerkzeughalter einfahrend
    • Cutter body tilts up to the part before the
    blade cuts
    • Separate Ports for cutter tilt and blade
    activation
    • Only one air circuit is needed when
    Pneumatic Timing Unit (TU-01) is used
    • Blades sold separately
    Bottom
    * Soft Plastics are PP & PE
    MG... Slide & cut type cutter
    MG… Angussschneider mit Kipp- & Schneidefunktion
    • Cutter body tilts up to the part before the blade cuts
    • Separate Ports for cutter tilt and blade activation
    • Only one air circuit is needed when Pneumatic
    Timing Unit (TU-01) is used
    • Blades sold separately
    * Soft Plastics are PP & PE
    DEGatING cuttERS, BLaDES and accESSoriES
    *Blades sold separately
    Cutter Body Cutting Capacity Weight(g)
    Air Consumption
    (cm³/ stroke)
    Working Air
    Pressure (Bars)
    Blade
    Category
    Weight (g) Price
    MER-3 Soft Plastic ø 1 170 30 4~5 II ~ $201.30
    MER-5 Soft Plastic ø 1.2 260 40 4~5 II 294 $217.25
    MER-10 Soft Plastic ø 2.5 440 90 4~5 II ~ $253.37
    MER- 20 Soft Plastic ø 4.5 680 150 5~6 II ~ $310.02
    MER- 30 Soft Plastic ø 6 1440 300 5~6 II ~ $420.93
    Cutter Body A B C D E F G H J K L M N O P R S T U
    MER-3 83 20 28 19 41 54 34 10 9 21 25 M3 M3 7 4 13 3 2 2.5
    MER-5 90 29 28 17 42 62 42 10 9 29 25 M3 M3 7 4 15 4 2 2.5
    MER-10 116 35 35 21 57 73 51 12 9 36 28 M3 M3 9 4 16 5 2 3
    MER-20 123 44 42 21 60 84 62 12 9 36 28 M4 M4 12 4 23 8 2 3
    MER-30 160 56 47 29 71 109 70 16 11 50 48 M4 M4 17 4 50 28 3 4
    Cutter Body Cutting Capacity Weight(g)
    Air Consumption (cm³/
    stroke)
    Working Air
    Pressure (bars)
    Blade
    Category
    Weight (g) Price
    MG- 3 Soft Plastic ø 2 80 22 4~5 III 122 $181.13
    MG- 10 Soft Plastic ø 2 80 22 4~5 III ~ $234.78
    MG- 20 Soft Plastic ø 2 80 22 4~5 III 489 $248.97
    Cutter Body A B C D E F G H J L
    MG- 3 50 20 60 16 14 25 15 7 M3 4
    MG-10 73 35 73 20 27 29 18 9 M3 4
    MG- 20 95 46 89 21 36 39 19 12 M4 4
    + sas-automation.com | 79
    ?
    ?
    ?????????
    ?
    ?
    ?
    ? ? ?
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ? ? ?
    CF... turtle-neck Blade type
    • Separate Ports for cutter slide and blade activation
    • As air is applied to the cutter's slide port, the
    moveable part of the cutter body extends 30mm
    • As air to the cutter's slide port is exhausted, the
    moveable part of the cutter body returns
    • Only one air circuit is needed when Pneumatic
    Timing Unit (TU-01) is used
    • Blades sold separately
    CF… Schnapper Typ
    • Separate Ports for cutter slide and blade activation
    • As air is applied to the cutter's slide port, the moveable
    part of the cutter body retracts 30mm
    • As air to the cutter's slide port is exhausted, the
    moveable part of the cutter body returns
    • Only one air circuit is needed when Pneumatic Timing
    Unit (TU-01) is used
    • Blades sold separately
    CL… Schnapper Typ
    CL…
    CL... turtle neck Blade type
    * Soft Plastics are PP & PE
    * Soft Plastics are PP & PE
    ** Hard Plastics are ABS, Polycarbonates, Acrylic resin, POM & PS
    dEGatinG cuttErS, BLadES and accESSoriES
    DEGatING cuttERS, BLaDES and accESSoriES
    *Blades sold separately
    Cutter Body Cutting Capacity Weight(g)
    Air Consumption
    (cm³/ stroke)
    Working Air Pressure
    (bars)
    Blade
    Category
    Weight
    (g)
    Price
    CF-5 Soft Plastic ø 2 570 490 5~6 I ~ $279.00
    CF-10
    Soft Plastic ø 4
    Hard Plastic ø 2.6
    940 830 4~5 I 1028 $299.00
    CF-20
    Soft Plastic ø 7
    Hard Plastic ø 5
    1300 1160 5~6 I ~ $399.00
    Cutter Body A B C D E F G H I J K L M N O P Q R S T U V W X Y
    CF- 5 124 54 44 44 47 28 80 15 10 19 16 33 31 7 8 10 45 32 M6 7 20 30 18 G 1/4" 30
    CF- 10 146 64 54 54 54 34 100 15 10 21 26 40 34 7 8 16 60 40 M6 9 20 30 19 G 1/4" 30
    CF- 20 165 70 62 62 62 42 117 15 10 23 26 55 36 9 8 16 75 40 M6 12 26 34 21 G 1/4" 30
    Cutter Body Cutting Capacity Weight (g)
    Air consumption
    (cm³/ stroke)
    Working Air
    Pressure (bars)
    Blade
    Category
    Price
    CL-5 Soft Plastic Ø 2 650 300 4~5 I $250.00
    CL-10
    Soft Plastic Ø 4
    1,050 590 4~5 I $275.00
    Hard Plastic Ø 2.6
    CL-20
    Soft Plastic Ø 7
    1,450 980 5~6 I $300.00
    Hard Plastic Ø 5
    Cutter Body A B C D E F G H I J K L M N O P Q R S T U V W X Y
    CL-5 165 60 44 59 59 30 73 35 7 50 18 37 18 7 8 9 55 59 M6 7 20 30 23 G 1/4" 30
    CL-10 187 70 54 70 70 36 88 35 7 57 23 40 25 7 9 15 58 72 M6 9 20 34 29 G 1/4" 30
    CL-20 205 80 62 80 80 42 104 30 8 63 28 50 26 9 10 18 70 80 M6 12 26 40 33 G 1/4" 30
    ?????????
    ?????????????
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    MS/MSP... Standard Square type/pressure Booster type
    MS… Standard Typ, Quadratisch /
    MSP… Druckverstärker Typ
    • Square body with mounting holes on all four sides
    • MSP-Type has a pressure booster
    • Blades sold separately
    SC... cutting Speed adjustable type
    CP... Scissors action Blade type
    SC… Drehzahljustierungs Typ
    CP... Scherenbewegungs Typ
    • Speed adjustable cut
    • Optimizes quality of cut and reduces cracking and chipping
    • Extends the life of cutter blades
    • Blades sold separately
    • Scissor style cutting method
    • Blade has a movable and a fixed side
    • Blades sold separately
    * Soft Plastics are PP & PE ** Hard Plastics are ABS, Polycarbonates, Acrylic resin, POM & PS
    * Soft Plastics are PP & PE ** Hard Plastics are ABS, Polycarbonates, Acrylic resin, POM & PS
    * Soft Plastics are PP & PE ** Hard Plastics are ABS, Polycarbonates, Acrylic resin, POM & PS
    DEGatING cuttERS, BLaDES and accESSoriES
    *Blades sold separately
    Cutter Body A B C D E F G H I J K L M N O P Q R
    MS-3 89 20 40 19 24 16 14 21 14 M3 M3 3.3 20 7 7 - - 71
    MS-5 74 30 30 14 19 24 20 20 20 M4 M3 4.3 20 7 7 - - 55
    MS-10 93 36 30 18 23 28 28 20 24 M4 M4 4.3 20 9 7 - - 65
    MS-20 109 45 40 19 24 36 36 20 30 M5 M4 5.3 26 12 9 - - 81
    MS-30 150 56 60 20 30 46 46 20 40 M6 M5 5.3 36 17 15 - - 110
    MSP-20 109 45 40 19 24 36 36 20 30 M5 M4 5.3 26 12 9 87 45 81
    MSP-30 150 56 60 20 30 46 46 20 40 M6 M5 5.3 36 17 15 92 56 110
    Cutter Body Cutting Capacity Weight (g)
    Air Consumption
    (cm³/ stroke)
    Working Air
    Pressure (bars)
    Blade
    Category
    Price
    MS-3 Soft Plastic ø 1 131 35 4~5 I $169.58
    MS-5 Soft Plastic ø 2 160 64 4~5 I $169.58
    MS-10
    Soft Plastic ø 4
    Hard Plastic ø 2.6
    260 116 4~5 I $169.58
    MS-20
    Soft Plastic ø 7
    Hard Plastic ø 5
    430 230 5~6 I $203.12
    MS-30
    Soft Plastic ø 10
    Hard Plastic ø 6.5
    810 584 5~6 I $259.58
    MSP-20
    Soft Plastic ø 7
    Hard Plastic ø 5
    650 400 5~6 I $275.00
    MSP-30
    Soft Plastic ø 10
    Hard Plastic ø 6.5
    1220 956 5~6 I $360.00
    Cutter Body Cutting Capacity Body Length Body ø Weight (g)
    Air Consumption (cm³/
    stroke)
    Working Air
    Pressure (bars)
    Blade
    Category
    Price
    SC-10
    Soft Plastic ø 4
    Hard Plastic ø 2.6
    133 250 250 120 4~5 I $195.42
    SC-20
    Soft Plastic ø 7
    Hard Plastic ø 5
    149 410 493 240 5~6 I $210.83
    SC-30
    Soft Plastic ø 10
    Hard Plastic ø 6.5
    184 670 774 590 5~6 I $223.75
    Cutter Body Cutting Capacity Body Length Body ø Weight (g)
    Air Consumption
    (cm³/ stroke)
    Working Air
    Pressure (bars)
    Blade
    Category
    Price
    CP-10M
    Soft Plastic ø 4
    Hard Plastic ø 2.6
    132 220 36 116 4~5 IV $129.00
    CP-20M
    Soft Plastic ø 7
    Hard Plastic ø 5
    155 400 402 230 5~6 IV $139.00
    CP-30M
    Soft Plastic ø 10
    Hard Plastic ø 6.5
    185 630 676 584 5~6 IV $199.00
    + sas-automation.com | 81
    MSF/MSFP... Lightweight Square type/High power Square type
    MSF… Quadratischer Typ /
    MSFP… Hochleistungs Typ
    • Cylindrical body with a mounting flange
    • Useful for table mounting where a low profile is
    necessary
    • MSFP-Type has a pressure booster
    • Blades sold separately
    MSK... Square type
    MSK… Quadratischer Typ
    • Square body for secure mounting
    • Cylindrical head fits in to tight spaces
    • Blades sold separately
    * Soft Plastics are PP & PE ** Hard Plastics are ABS, Polycarbonates, Acrylic resin, POM & PS
    dEGatinG cuttErS, BLadES and accESSoriES
    DEGatING cuttERS, BLaDES and accESSoriES
    *Blades sold separately
    Cutter Body Cutting Capacity Weight(g)
    Air Consumption
    (cm³/ stroke)
    Working Air
    Pressure (bars)
    Blade
    Category
    Price
    MSF-10
    Soft Plastic ø 4
    Hard Plastic ø 2.6
    180 116 4~5 I $169.58
    MSF-20
    Soft Plastic ø 7
    Hard Plastic ø 5
    310 230 5~6 I $203.12
    MSF-30
    Soft Plastic ø 10
    Hard Plastic ø 6.5
    560 584 5~6 I $254.58
    MSFP-10
    Soft Plastic ø 4
    Hard Plastic ø 2.6
    280 223 3-3.5 I $362.50
    MSFP-20
    Soft Plastic ø 7
    Hard Plastic ø 5
    530 508 3-3.5 I $470.62
    MSFP-30
    Soft Plastic ø 12
    Hard Plastic ø 6.5
    880 958 5~6 I $583.75
    Cutter Body A B C D E F G H I J K L M N
    MSF-10 93 36 35 35 18 9 30 20 24 M3 M4 7 - -
    MSF-20 109 45 44 44 24 12 37 20 30 M4 M5 9 - -
    MSF-30 150 56 55 55 34 17 46 20 40 M4 M6 15 - -
    MSFP-10 93 36 35 35 18 9 30 20 24 M3 M4 7 71 36
    MSFP-20 109 45 44 44 24 12 37 20 30 M4 M5 9 87 45
    MSFP-30 150 56 55 55 34 17 46 20 40 M4 M6 15 92 56
    Cutter Body A B C D E F G H I J K L M N O P
    MSK-10 87 36 18 10 15 28 35 17 24 M4 M4 33 18 9 7 35
    MSK-20 102 45 20 15 20 36 44 17 30 M5 M4 42 24 12 9 44
    MSK-30 141 56 27 18 26 46 55 17 40 M6 M5 52 34 17 15 55
    Cutter Body
    Cutting
    Capacity
    Weight(g)
    Air Consumption
    (cm³/ stroke)
    Working Air
    Pressure (bars)
    Blade
    Category
    Price
    MSK-10
    Soft Plastic ø 4
    Hard Plastic ø 2.6
    190 116 4~5 I $169.58
    MSK-20
    Soft Plastic ø 7
    Hard Plastic ø 5
    408 230 5~6 I $203.12
    MSK-30
    Soft Plastic ø 10
    Hard Plastic ø 6.5
    590 584 5~6 I $285.42
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    GCK... adjustable Gate cutting Knife
    TCN... thrust cutter nipper
    TCN… Druckangussschneider
    • Easily mounts to standard mounting clamps
    • Lightweight for maximum efficiency in cutting applications
    • Elbow arm allows for fine adjustment of cutter blade
    • Blade positioned at 45° angle
    • Actuated guillotine motion allows for access to
    hard-to-reach areas
    DEGatING cuttERS, BLaDES and accESSoriES
    GCK… Filmanguss-Schneidmesser verstellbar
    GCK...
    Thrust Cutter Nipper A B C D E F Price
    TCN 63 99 84 405 64 28 85 $1,575.00
    Adjustable Cutting Knife A B C D E Price
    GCK 20-150 32 19 198 20 42 $129.03
    + sas-automation.com | 83
    MR-AH... Sprue Holder
    • New compact design for tight applications
    • Efficiently mounts to cutter body
    • Normally connected to nipper supply line for single pneumatic operation
    MR-AH… Angusshalter
    MR-AH...
    MR-SH... Sprue cutter Sensor Kit
    • Ensures blade is open and assures part clearance
    • Adjustable for use with F5, F5A, F5S, F5U1, F5NR279,
    and F5XR325 blades
    MR-SH...
    MR-KS... Standard Sprue cutter clamp
    • Adjustable clamp for the cutter body
    • Mounts any 20 series gripper mounting arms and mounting clamps,
    including GLA's, WKA's, WSL's, and WST's
    MR-KS…Klemmstück für Angussschneidzange
    MR-KS...
    dEGatinG cuttErS, BLadES and accESSoriES
    DEGatING cuttERS, BLaDES and accESSoriES
    MR-SH… Angusshalter
     A B C D E F G Sprue Cutter Weight (g) Price
    MR-KS 10 36 20 45 22 45 51 25 MR 10 A 92 $42.25
    MR-KS 20 45 20 51 35 45 70 25 MR 20 A 132 $42.50
    MR-KS 30 56 20 64 40 45 80 25 MR 30 A 168 $47.25
    MR-KS 50 75 20 89 50 50 100 25 MR 50 A 296 $56.25
    A B C D Sprue Cutter Weight (g) Price
    MR-AH 20 18 47 81 66 MR 20 A ~ $167.25
    MR-AH 30 18 37 75 66 MR 30 A 119 $129.00
    MR-AH 50 18 37 93 67 MR 50 A 104 $129.00
    A B C D Sprue Cutter Sensor Weight (g) Price
    MR-SH 20 34 22 27 19 MR 20 A SP 1.5 / SN 1.5 47 $90.00
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    cuttER accESSoriES
    TU-01... timing unit
    • Out 1 Port fires first and is intended to control the slide or tilt motion of the
    cutter body
    • Out 2 Port fires after a short delay and is intended to control the blade
    • Delay between port firing is adjustable to suit specific applications
    • Port Size G 1/4”
    TU-01…Zeitrelais
    ME-HP... adapters for aSZ-mE cutters
    • Allows ME sprue cutters to attach to
    standard VLR Arm Extensions and mount in
    standard mounting clamps
    ME-HP… Halteplatte für Angussschneidzange
    ME-HP…
    A B C D E F G Price
    TU-01 80 46 34 5 20 20 60 $125.00
     A B C D E F G H I Cutter Extension Price
    ME-HP 3/5/10 63 35 16 6 3.5 M17 X 1 26 14 22 ME 3/5/10 VLR 20-L $31.75
    ME-HP 20/30 100 51 16 6 4.5 M27 X 1 34 ~ 40 ME 20/30 VLR 30-L $32.25
    + sas-automation.com | 85 cuttEr accESSoriES
    • Space age ceramics make safe deburring possible with Work Finisher’s unique non-
    blade like edge.
    • Deburrs hard plastics effortlessly withough cutting hands and fingers
    • Ideal for curved and complicated shapes
    • Excels on ultra-hard resins like glass-fiber, carbon-fiber, and talc filled plastics
    WF... Work Finisher
    WF… Entgratungsmesser Workfinisher aus Keramik
    WF…
    cuttER accESSoriES
    VLR... arm Extension
    • Extends GRF and GRW gripper fingers
    • Attaches to ADZ and ADG cylinder
    adapters, ME-HP cutter adapters, and
    ZTB locator pins
    • Tightening hole for securing connection
    to mating parts
    VLR… Verlängerungsrohr
     A B C Weight (g) Price
    VLR 10-90 10 M8 x 1 90 9 $6.75
    VLR 14-120 14 M12 x 1 120 19 $6.75
    VLR 20-150 20 M17 x 1 150 46 $8.75
    VLR 30-200 30 M27 x 1 200 94 $14.00
    Blade Length
    Overall
    Length
    Blade Thickness Weight (g) Price
    WF-1540 40 130 10 52 $26.83
    WF-620 25 105 6 22 $22.63
    Angle
    Angle
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    Category I Standard Blades
    Schneideinsätze Typ I
    F* Type
    F*S Type
    FD* Type
    FEP* Type
    • Can be used on MR, ML, MSR, CF, MS/MSP, SC,
    MSF/MSFP, MSK, SMR cutters
    • Can be used on MR, ML, MSR, CF, MS/MSP, SC,
    MSF/MSFP, MSK, SMR cutters
    • Can be used on MR, ML, MSR, CF, MS/MSP, SC,
    MSF/MSFP, MSK, SMR cutters
    • Can be used on MR, ML, MSR, CF, MS/MSP, SC,
    MSF/MSFP, MSK, SMR cutters
    ± 1mm tolerance for dimensions B & C
    Schneideinsätze cuttER accESSoriES
    Blade No.
    A (Pivot
    Location)
    B (Edge Length)
    C (Blade
    Opening)
    Cutter Body Size Weight (g) Price
    F10S 24 12 2.5 3 33 $48.56
    F1S 24 12 3 5 ~ $48.56
    F3S 27 13 4.5 10 69 $48.56
    F5S 35 16 8.5 20 121 $57.76
    F9PSF 65 37 15 30/50 416 $81.00
    Blade No.
    A (Pivot
    Location)
    B (Edge
    Length)
    C (Blade
    Opening)
    D Cutter Body Size Weight (g) Price
    FEP20 20 7 2.3 7.5 3 ~ $57.20
    FEP2 20 7 3.1 7.5 5 41 $97.15
    FEP4 26 9 5.2 7.5 10 ~ $57.20
    FEP6 28 12 8.9 11.5 20 112 $67.83
    FEP7 26 9 3.2 7.5 7 ~ $57.76
    FEP10PF 34 17 6 11.5 30 353 $108.52
    Blade No.
    A (Pivot
    Location)
    B (Edge Length)
    C (Blade
    Opening)
    Blade Angle Cutter Body Size Weight (g) Price
    F10 24 12 2.5 15º 3 ~ $48.56
    F1 24 12 3 15º 5 39 $48.56
    F3 27 12 4.5 25º 10 ~ $48.56
    F5 35 15 8.5 15º 20 122 $51.34
    F9PF 65 38 15 15º 30/50 397 $81.00
    Blade No.
    A (Pivot
    Location)
    B (Edge Length)
    C (Blade
    Opening)
    Blade Angle Cutter Body Size Weight (g) Price
    FD10 24 12 2.5 40º 3 ~ $53.06
    FD1 24 12 3.0 40º 5 ~ $53.06
    FD3 27 13 4.5 40º 10 71 $72.25
    FD5 35 16 8.5 40º 20 123 $62.28
    FD7 27 12 3.4 40º 7 70 $60.01
    FD9PF 65 28 15.0 30º 30/50 415 $105.30
    + sas-automation.com | 87
    ??
    ?
    ??
    ?
    ??
    ?
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ?
    ?
    ?
    ?
    ?
    ??
    ??
    ?
    ??
    ?
    ??
    ?
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ?
    ?
    ?
    ?
    ?
    ??
    ??
    ?
    ??
    ?
    ??
    ?
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ?
    ?
    ?
    ?
    ?
    ??
    ??
    ?
    ??
    ?
    ??
    ?
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ?
    ?
    ?
    ?
    ?
    ??
    ??
    ?
    ??
    ?
    ??
    ?
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ?
    ?
    ?
    ?
    ?
    ??
    ??
    ?
    ??
    ?
    ??
    ?
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ?
    ?
    ?
    ?
    ?
    ??
    ??
    ?
    ??
    ?
    ??
    ?
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ?
    ?
    ?
    ?
    ?
    ??
    ??
    ?
    ??
    ?
    ??
    ?
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ?
    ?
    ?
    ?
    ?
    ??
    ??
    ?
    ??
    ?
    ??
    ?
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ??
    ?
    ?
    ?
    ?
    ?
    ??
    B
    *EP6UR322C
    *F5XR302
    *F5XR325
    *F5X62
    *F5NR279
    *F5NR329
    *F55U23
    *F5X1
    25
    34
    33
    23
    16
    18
    34
    12
    Category I additional Blades for Size 20 Bodies
    B= Blade Length
    Cutting edge
    Highlighted
    Typ I Zusätzliche Schneideinsätze für 20-er
    Angussschneider-Gehäuse
    F5, FD, EP Type
    Buy with confidence.
    Find a lower price?
    We'll match that price on
    the spot. It's that simple.
    • Can be used on size 20 MR, ML, MSR, CF, CL,
    MS/MSP, SC, MSF/MSFP, MSK, SMR cutters.
    *Call for availability
    ± 1mm tolerance for dimensions B & C
    Blade #
    Note Cutting Edge
    cuttEr accESSoriES
    cuttER accESSoriES
    Special Category I Blades for Size 20 Cutter Bodies
    Blade No.
    A (Pivot
    Location)
    B (Edge
    Length)
    C (Blade
    Opening)
    D (Center Gap) Blade Angle Weight (g) Price
    F5X1 62 34 17 ~ 15º 211 $188.88
    F55U23 44 25 12 ~ 20º 145 $210.00
    FD5A 35 16 5 ~ 40º ~ $61.05
    F5NR329 52 33 7 ~ 40º ~ $359.00
    F5NR279 45 23 11 ~ 90º ~ $339.00
    F5X62 61 18 16 ~ 90º 261 $276.00
    F5XR325 40 16 10 ~ 90º 221 $219.00
    F5XR302 50 34 10 ~ 90º 265 $275.00
    EP6UR322C 48 12 11 8 90º 171 $199.00
    EP6UR322 48 6 11 8 90º 166 $218.27
    ?
    ?
    ??
    ?
    ??
    ?
    ??
    ?
    ?
    ?
    ??
    ??
    ??
    ????
    ??
    ???
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ??
    ?
    ??
    ?
    ??
    ?
    ?
    ?
    ??
    ??
    ??
    ????
    ??
    ???
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ??
    ?
    ??
    ?
    ??
    ?
    ?
    ?
    ??
    ??
    ??
    ????
    ??
    ???
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ??
    ?
    ??
    ?
    ??
    ?
    ?
    ?
    ??
    ??
    ??
    ????
    ??
    ???
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ??
    ?
    ??
    ?
    ??
    ?
    ?
    ?
    ??
    ??
    ??
    ????
    ??
    ???
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ??
    ?
    ??
    ?
    ??
    ?
    ?
    ?
    ??
    ??
    ??
    ????
    ??
    ???
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ??
    ?
    ??
    ?
    ??
    ?
    ?
    ?
    ??
    ??
    ??
    ????
    ??
    ???
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ??
    ?
    ??
    ?
    ??
    ?
    ?
    ?
    ??
    ??
    ??
    ????
    ??
    ???
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ?
    ??
    ?
    ??
    ?
    ??
    ?
    ?
    ?
    ??
    ??
    ??
    ????
    ??
    ???
    ?
    ?
    ?
    ?
    ?
    ?
    Note Cutting
    Edge
    B
    *F9PZXR352F 50
    *F9VPOF 40
    *F9PVR48F 40
    *F9PGM60F 32
    *F9PZXR261F 17
    *F9PNR25F 33
    *F9PNR322F 40
    *F9PZXR393F 30
    Blade #
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    B= Blade Length
    Category I
    Cutting edge
    Highlighted
    *Call for availability
    +/- 1mm tolerance on B & C
    Typ I Zusätzliche Schneideinsätze für 30er und 50er Angussschneider-Gehäuse additional Blades for
    Size 30 & 50 Bodies
    F9 Type
    • Can be used on size 30/50 MR, ML, MSR,
    CF, CL, MS/MSP, SC, MSF/MSFP, MSK, SMR
    cutters.
    cuttER accESSoriES
    Blade No.
    A (Pivot
    Location)
    B (Edge
    Length)
    C (Blade Opening)
    D (Center
    Gap)
    Blade Angle Weight (g) Price
    30 Series 50 Series
    F9PZXR352F 100 50 16 35 ~ 0º 514 $797.48
    F9VPOF 60 40 15 20 ~ 30º 417 $537.45
    F9PVR48F 75 40 17 30 ~ 30º 383 $396.00
    F9PGM60F 55 32 10 23 ~ 60º 401 $365.00
    F9PZXR261F 110 17 14 34 13.5 85º 633 $599.00
    F9PNR25F 50 33 10 19 ~ 90º 467 $349.00
    F9PNR322F 65 40 12 27 ~ 90º 525 $355.93
    F9ZXR393F 80 30 21 37 ~ 0º (offset) ~ $650.00
    + sas-automation.com | 89
    • Can be used on ME & MER cutters.
    Category II Standard Blades
    Category III Standard Blades
    F*E Type
    Schneideinsätze Typ II
    F*EK Type
    • Can be used on ME & MER cutters.
    FG* Type
    Schneideinsätze Typ III
    • Can be used on MG cutter.
    FG*K Type
    • Can be used on MG cutter.
    cuttEr accESSoriES
    cuttER accESSoriES
    Blade No. A (Pivot Location) B (Edge Length) C (Blade Opening) Cutter Body Size Weight (g) Price
    F10E 24 13 3.5 3 26 $45.16
    F1E 24 12 5.5 5 ~ $58.16
    F3E 27 13 7 10 59 $50.56
    F5E 35 18 9 20 118 $60.01
    F9E 65 39 15 30 384 $78.00
    Blade No. A (Pivot Location) B (Edge Length) C (Blade Opening) Cutter Body Size Weight (g) Price
    FG10 24 13 4 3 26 $56.47
    FG3 27 13 7 10 59 $57.76
    FG5 34 18 8 20 107 $67.12
    Blade No. A (Pivot Location) B (Edge Length) C (Blade Opening) Cutter Body Size Weight (g) Price
    F10EK 24 13 7 3 26 $47.88
    F1EK 24 12 9 5 33 $68.78
    F3EK 27 13 15 10 59 $50.81
    F5EK 35 18 9.0 20 112 $60.01
    F9EK 65 39 15.0 30 396 $83.25
    Blade No. A (Pivot Location) B (Edge Length) C (Blade Opening) Cutter Body Size Price
    FG10K 24 13 4 3 $57.76
    FG3K 27 13 7 10 $57.76
    FG5K 34 18 8 20 $67.12
    Angle
    Angle
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    Category IV Standard Blades
    F*** Type
    • Can be used on CP cutters
    • Only one side of the blade moves, making locating cut
    easier
    FD*** Type
    • Can be used on CP cutters
    • Only one side of the blade moves, making locating cut
    easier
    Schneideinsätze Typ IV
    Category V Standard Blades
    FN* Type
    • Can be used on SN cutters
    • Pushes up close to part when cutter strokes in
    • Pulls cut material away from part as cutter returns
    Schneideinsätze Typ V
    Category VI Standard Blades
    FNP* Type
    • Can be used on SNP cutters
    • Pulls up close to part when cutter strokes out
    • Pushes cut material away from part as cutter returns
    Schneideinsätze Typ VI
    cuttER accESSoriES
    Blade No.
    A (Pivot
    Location)
    B (Edge
    Length)
    C (Blade
    Opening)
    Blade Angle
    Cutter Body
    Size
    Weight (g) Price
    F300 27 15 3 15º 10 ~ $50.81
    F500 35 22 7 15º 20 113 $49.75
    F900 65 45 10 15º 30 ~ $69.00
    Blade No.
    A (Pivot
    Location)
    B (Edge
    Length)
    C (Blade
    Opening)
    Cutter Body Size Weight (g) Price
    FN10 24 11 3.5 3 26 $71.32
    FN1 24 11 5.5 5 28 $73.29
    FN3 27 12 7.5 10 53 $75.29
    FN5 35 15 8.5 20 95 $95.11
    Blade No.
    A (Pivot
    Location)
    B (Edge
    Length)
    C (Blade
    Opening)
    Cutter Body Size Weight (g) Price
    FNP10 24 11 3.5 3 ~ $74.30
    FNP1 24 11 5.5 5 29 $77.07
    FNP3 27 12 7.5 10 53 $79.25
    FNP5 35 15 8.5 20 92 $99.06
    Blade No.
    A (Pivot
    Location)
    B (Edge
    Length)
    C (Blade
    Opening)
    Blade Angle Cutter Body Size Price
    FD300 27 15 3 40º 10 $55.51
    FD500 34 20 7 40º 20 $62.44
    FD900 65 27 10 40º 30 $87.93
    + sas-automation.com | 91
    LRS-18P
    LES-5
    LRS & LES... Optical Sensors
    LRS & LES…Teilesensoren
    • Long sensing range
    • Provides part present sensing for parts when vacuum
    sensors can’t be used due to thin material
    • LES sensor can be used with standard mounting clamps
    when attached to a GGE 14-80 FB
    • LRS sensor has round shape and includes jam nuts for
    plate mounting
    • Sensors with or without connectors
    • 2-Wire Reed switch sensors have higher
    voltage resistance capability
    • 3-Wire Solid State Switches have faster
    reaction time
    IRK & RRK... Cylinder Sensor
    IRK & RRK… Zylindersensoren
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    Sensoren, Steckverbinder,
    Signalmehrfachverbinder und Zubehör
    SenSOrS, COnneCtOrS and aCCeSSOrieS
    SenSorS, ConneCtorS and aCCeSSOrieS
    Proximity Sensors without Quick Connectors
    Sensor Type
    Supply
    Voltage
    (VDC)
    Applicable Component/
    Cylinder
    Cable
    Length
    Wires Output Weight (g) Price
    IRK 4 Ind. Proximity 10-30 PGR... 3m 3 PNP 30 $136.80
    RRK-93 Reed Switch 24 IST / KHZ / RC B-S / SZD 3m 2 ~ 29 $34.95
    RRK-M9P Solid State Switch 4.5-28 IST / KHZ / RC B-S / SZD 3m 3 PNP 41 $54.29
    RRK-Y59B Read Switch 24 LPG 10-.../PGR...-S 3m 3 ~ 44 $48.82
    RRK-Y7P Solid State Switch 4.5-28 LPG 10-.../PGR...-S 2m 3 PNP 51 $63.36
    SN 1.5 Ind. Proximity 10-30 GRZ / MR-SH / ZTS 2m 3 NPN 30 $62.50
    SP 1.5 Ind. Proximity 10-30 GRZ / MR-SH / ZTS 2m 3 PNP 29 $62.50
    Cylinder Sensors with M8, 3 Pin Quick Connectors
    Sensor Type
    Supply
    Voltage
    (VDC)
    Applicable Component/
    Cylinder
    Cable
    Length
    Wires Output Weight (g) Price
    IRK 4-TP Ind. Proximity 10-30 PGR... 0.5m 3 PNP ~ $150.00
    RRK-93-TP Reed Switch 24 IST / KHZ / RC B-S / SZD 0.5m 2 ~ ~ $43.90
    RRK-M9P-TP Solid State Switch 4.5-28 IST / KHZ / RC B-S / SZD 0.5m 3 PNP 10 $84.70
    RRK-OHSP-006 Solid State Switch 5-30 ISC MPS-.../ LPG / RPL-... 150mm 3 PNP ~ $93.60
    RRK-OISP-014 Ind. Proximity 10-30
    LPG RPW-375-.../ RC-25.4-
    RR / RC-31.8-RR
    150mm 3 PNP ~ $172.80
    RRK-OISP-015 Ind. Proximity 10-30 RC-12.7-RR / RC-19.1-RR 150mm 3 PNP ~ $172.00
    RRK-OISP-019 Ind. Proximity 10-30 PGR 5-R / PGR 10-R 150mm 3 PNP 8 $117.00
    RRK-Y59B-TP Reed Switch 24 LPG 10-.../PGR...-S 0.5m 2 ~ 12 $78.50
    RRK-Y7P-TP Solid State Switch 4.5-28 LPG 10-.../PGR...-S 0.5m 3 PNP 31 $78.50
    SN 1.5-P Ind. Proximity 10-30 GRZ / MR-SH / ZTS 200mm 3 NPN 12 $62.50
    SP 1.5-P Ind. Proximity 10-30 GRZ / MR-SH / ZTS 200mm 3 PNP 13 $62.50
    SP 1.5 PM1.2 Ind. Proximity 10-30 GRZ / MR-SH / ZTS 1.2m 3 PNP 26 $64.50
     Sensor Type Supply Voltage (VDC) Sensing Range (mm) Cable Length Wires Quick Connector Output Weight (g) Price
    LES-5 Diffuse Reflective 10-30 30-300 2m 3 ~ PNP 86 $109.00
    LES-5P Diffuse Reflective 10-30 30-300 150mm 3 3-Pin Plug PNP 70 $126.00
    LRS-18P Diffuse Reflective 10-30 0-300 150mm 3 3-Pin Plug PNP 91 $105.00
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    SEO & GEO... Mechanical Sensors
    SEO & GEO... Teilesensoren (mechanisch)
    • Provides part present sensing when vacuum sensors can't be used and a short sensing range
    is necessary
    • SEO sensor can be used with standard mounting clamps when attached to a
    GGE 14-80 FB
    • GEO houses and protects an SEO's terminals
    SenSorS, ConneCtorS and aCCeSSOrieS
    DSD... double Sheet detector
    • Detects the thickness of ferrous metals on the face of the sensor using pulsed electromagnetic detection.
    • Permits double sheet/blank detection with minimal magnetic attraction of the sheet.
    • Controller, Sensor, Mounting Bracket, and Cable sold separately.
    • Can detect sheets with min thickness of .25mm to a max of 2.3mm.
    • Standard SAS mounting arm mounts to standard clamps.
    Description Max.Supply Voltage Wires Output Weight (g) Price
    GEO-10 Terminal Enclosure for SEO 10 ~ ~ ~ 15 $7.70
    SEO-5 Mechanical Switch 125 VDC (0.1A)/125 VAC 2 ~ 18 $5.13
    SEO-10 Mechanical Switch 125 VDC (0.1A)/125 VAC 2 ~ 32 $15.25
    Description Price
    DSD-36 Control Module $2892.75
    DSD-36 Double Sheet Sensor $949.75
    DSD-36 Spring Loaded Mounting Bracket $505.25
    DSD-36 Cable; 8 Conductor 5 Meters Long $110.20
    + sas-automation.com | 93 SenSOrS, COnneCtOrS and aCCeSSOrieS
    TFR & TMR... Bulkhead electrical receptacles
    • Field wireable receptacles with wire leads
    • Add a quick disconnect for home run and sensor cables to any tool
    • No soldering required
    TFR & TMR… Elektronischer Schraubeinsatz
    TFR & TMR…
    TFP & TMP... electrical Connectors
    TFP & TMP… Steckverbinder
    • Field wireable screw down terminal cable ends
    • No soldering required
    TFP & TMP…
    SenSorS, ConneCtorS and aCCeSSOrieS
    Female
    Connector Size Pins Lead Length Weight (g) Price
    TFR-3 M8 3 500mm 14 $14.04
    TFR-5 M12 5 1m ~ $13.50
    TFR-8 M12 8 1m 51 $17.40
    TFR-10 M16 10 1m ~ $55.20
    Male
    Connector Size Pins Lead Length Weight (g) Price
    TMR-3 M8 3 500mm ~ $14.04
    TMR-5 M12 5 1m ~ $13.50
    TMR-8 M12 8 1m ~ $17.40
    TMR-10 M16 10 1m ~ $55.20
    Female
    Connector Size Pins Price
    TFP-3 M8 3 $18.06
    TFP-5 M12 5 $25.60
    TFP-8 M12 8 $27.50
    TFP-14 M16 14 $39.90
    Male
    Connector Size Pins Price
    TMP-3 M8 3 $18.06
    TMP-5 M12 5 $25.60
    TMP-8 M12 8 $27.50
    TMP-14 M16 14 $39.90
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    FM & FW... Cables
    FM & FW… Kabel
    • Threaded plug extension cables
    • Types available for sensors, PJB's, AJB's, and J-Boxes
    • High flexibility insulation for long cable life
    Male 5-Pin & 8-Pin EURO
    M8 X1
    SenSorS, ConneCtorS and aCCeSSOrieS
    Female 5-Pin & 8-Pin EURO
    M8 X1
    Female 3-Pin PICO
    M8 X1
    Male 3-Pin PICO
    M8 X1
    Male 14-Pin
    M16 x 0.75
    Female 14-Pin
    M16 x 0.75
    3-Pin Sensor Cables
    Connector
    Size
    Female
    Connector
    Male
    Connector
    # of Leads
    (Wires)
    Length
    (Meters)
    Weight (g) Price
    FM3-SS.5 M8 Straight Straight 3 0.5 ~ $24.20
    FM3-RS.5 M8 Right Straight 3 0.5 ~ $24.20
    FM3-SR.5 M8 Straight Right 3 0.5 ~ $24.20
    FM3-RR.5 M8 Right Right 3 0.5 23 $24.20
    FM3-SS1 M8 Straight Straight 3 1 ~ $22.40
    FM3-RS1 M8 Right Straight 3 1 ~ $24.20
    FM3-SR1 M8 Straight Right 3 1 ~ $24.20
    FM3-RR1 M8 Right Right 3 1 36 $24.20
    FM3-SS2 M8 Straight Straight 3 2 62 $24.20
    FM3-RS2 M8 Right Straight 3 2 ~ $24.20
    FM3-SR2 M8 Straight Right 3 2 61 $24.20
    FM3-RR2 M8 Right Right 3 2 ~ $24.20
    FW3-SW2 M8 Straight Wireable 3 2 ~ $14.30
    FW3-RW2 M8 Right Wireable 3 2 61 $14.30
    FW3-SW4 M8 Straight Wireable 3 4 ~ $15.50
    FW3-RW4 M8 Right Wireable 3 4 ~ $18.70
    5- Pin Home Run Cables
    Connector
    Size
    Female
    Connector
    Male
    Connector
    # of Leads
    (Wires)
    Length
    (Meters)
    Weight (g) Price
    FM5-SS3 M12 Straight Straight 5 3 ~ $108.40
    FM5-RS3 M12 Right Straight 5 3 ~ $61.10
    FM5-SS10 M12 Straight Straight 5 10 ~ $108.40
    FM5-RS10 M12 Right Straight 5 10 ~ $108.40
    FW5-SW3 M12 156 $46.40
    FW5-SW5 M12 Straight Wireable 5 5 ~ $62.00
    FW5-RW5 M12 Right Wireable 5 5 241 $62.00
    FW5-SW10 M12 Straight Wireable 5 10 ~ $93.20
    FW5-RW10 M12 Right Wireable 5 10 ~ $93.20
    8-Pin Home Run Cables
    Connector
    Size
    Female
    Connector
    Male
    Connector
    # of Leads
    (Wires)
    Length
    (Meters)
    Weight (g) Price
    FM8-SS3 M12 Straight Straight 8 3 ~ $92.80
    FM8-RS3 M12 Right Straight 8 3 ~ $92.80
    FM8-SS10 M12 Straight Straight 8 10 ~ $155.20
    FM8-RS10 M12 Right Straight 8 10 ~ $155.20
    FW8-SW5 M12 Straight Wireable 8 5 ~ $88.00
    FW8-RW5 M12 Right Wireable 8 5 ~ $88.00
    FW8-SW10 M12 Straight Wireable 8 10 479 $129.60
    FW8-RW10 M12 Right Wireable 8 10 ~ $129.60
    14-Pin Home Run Cables
    Connector
    Size
    Female
    Connector
    Male
    Connector
    # of Leads
    (Wires)
    Length
    (Meters)
    Weight (g) Price
    FM10-SS3 M16 Straight Straight 10 3 ~ $139.60
    FM10-RS3 M16 Right Straight 10 3 ~ $139.60
    FM10-SS10 M16 Straight Straight 10 10 ~ $188.60
    FM10-RS10 M16 Right Straight 10 10 ~ $188.60
    FW10-SW5 M16 Straight Wireable 10 5 ~ $94.30
    FW10-RW5 M16 Right Wireable 10 5 ~ $112.30
    FW10-SW10 M16 Straight Wireable 10 10 ~ $143.30
    FW10-RW10 M16 Right Wireable 10 10 ~ $179.30
    + sas-automation.com | 95
    PJB... Junction Boxes
    PJB… Signalmehrfachverbinder
    PJB…
    • AND logic (AJB) and Pass-Through (PJB) Junction Boxes
    with screw in terminals
    • Works with PNP or NPN sensors
    • Compact design for easy mounting on almost any tool
    • Female input connectors
    • Male output connectors
    SenSOrS, COnneCtOrS and aCCeSSOrieS
    SenSorS, ConneCtorS and aCCeSSOrieS
    SJB... Junction Box
    SJB… Signalmehrfachverbinder
    SJB…
    • AND- / OR-linked or AND-linked
    junction boxes
    • Puts PNP sensors in series
    • LED status displays
    PJB 4 Male Pinout
    Function Pin
    Wire Color
    (FW8-...)
    +V 5 Gray
    -V 7 Blue
    Port 1 1 White
    Port 2 2 Brown
    Port 3 3 Green
    Port 4 4 Yellow
    Inputs Logic
    Supply Voltage
    (VDC)
    Output Connector
    Size
    Output Connector Pins Output Conductors Signal Output A B C D E Price
    PJB 4 4 Pass Through 10-48 M12 8 6 PNP/NPN 86 25 30 79 23 $82.80
    PJB 8 8 Pass Through 10-48 M16 14 10 PNP/NPN 126 28 30 119 23 $106.80
    PJB 8 Male Pinout
    Function Pin
    Wire Color
    (FW10-...)
    +V M Brown
    -V U Blue
    Port 1 P White
    Port 2 E Green
    Port 3 O Yellow
    Port 4 C Gray
    Port 5 N Pink
    Port 6 R Red
    Port 7 G Black
    Port 8 S Violet
    PJB 4/ PJB 8 Female Pinout
    Function Pin
    +V 1
    -V 3
    Signal 4
    Weight (g) Price
    SJB 4 Junction Box 80 $141.22
    SJB 2x2 Junction Box 80 $141.22
    SJB 8 Junction Box 140 $176.45
    SJB 4x2 Junction Box 140 $176.45
    SJB 10 Junction Box 160 $240.70
    SJB 5x2 Junction Box 160 $240.70
    SJB Bridging Connector 10 $15.00
    Connection
    M12-Connector Pin
    Assignment
    4-Way Logic
    Module
    8-Way Logic
    Module
    1 +24 VDC +24 VDC
    2 0V DC 0V DC
    3 E1 Output 1
    4 E2 Output 2
    5 E3 –
    6 E4 –
    7 Output 1 Output 1
    8 Output 2 Output 2
    9 – –
    10 – –
    11 – –
    12 – –
    SJB 4 SJB 2X2 SJB 8 SJB 4X2 SJB 10 SJB 5X2
    Input PNP, NO (Pin 4)
    Output
    AND- / OR-
    linked
    AND-linked
    AND- / OR-
    linked
    AND-linked
    AND- / OR-
    linked
    AND-linked
    Operating Voltage 10 ... 30V DC
    Current Consumption 1A
    Output Current
    (Max Load)
    200mA Per Output
    Insulation Resistance > 109Ω
    Display (Function) Green LED
    Display (Signal) Yellow LED – Per Signal
    Operating Temperature -25 ... +70°C
    System Of Protection
    (En 60529)
    Ip67 - When Using Appropriate Sensors Or Blank Plugs

    PNP
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    KK & RPL... Wiring Sample diagrams
    KK & RPL… Schaltungsbeispiele
    KK & RPL…
    SenSorS, ConneCtorS and aCCeSSOrieS
    + sas-automation.com | 97 SenSOrS, COnneCtOrS and aCCeSSOrieS
    SenSorS, ConneCtorS and aCCeSSOrieS
    RVB... robot Valve Box
    • 24 VDC solenoid valves
    • Vacuum ejectors & valves
    • Air regulator, used to achieve maximum vacuum levels
    • Innovative vacuum check valve keeps parts on the EOAT in
    case of temporary loss of power or air
    • 24 VDC vacuum confirmation switches
    • Vacuum blow-off solenoid valves control the check-valves and
    blow-off features
    • Standard extra wiring terminals allow EOAT sensors to be wired
    to the robot through the Valve Box
    • Smart junction boards, used for robotic interfacing and effective
    troubleshooting, include LED's for monitoring I/O's and power
    supply
    • One touch pneumatic fittings and field wireable electrical
    connectors make the box easy to adapt to different EOAT's and
    robots
    RVB… Roboter-Ventilanschlussbox
    GGE…-F Sensor Gripper arm
    • Allows LES and SEO sensors to mount to standard mounting clamps
    GGE…-F Gelenkgreifarm für Sensor
    GGE…-F
    Air Circuits
    Vacuum
    Circuits
    Additional Thru
    I/O's
    A B C Price
    RVB 1-1 U22 1 1 4 280 136 345 $2,410.00
    RVB 1-2 U22 1 2 4 280 136 345 $2,940.00
    RVB 2-1 U22 2 1 4 280 136 345 $2,510.00
    RVB 2-2 U22 2 2 4 280 136 345 $3,060.00
    * U22 Valve Boxes (Exp: RVB 1-1 U22), are upgradeable to 2 air and 2 vacuum circuits
    RVB 2-2 U42 2 2 8 280 136 345 $3,210.00
    RVB 3-2 U42 3 2 8 280 136 345 $3,310.00
    RVB 4-2 U42 4 2 8 280 136 345 $3,415.00
    * U42 Valve Boxes (Exp: RVB 2-2 U42), are upgradeable to 4 air and 2 vacuum circuits
    RVB Upgrade Kits*
    RVB A1 Allows one additional air circuit to be added to a previously purchased RVB-Valve Box $260.00
    RVB V1 Allows one additional vacuum circuit to be added to a previously purchased RVB-Valve Box  $680.00
    * RVB Upgrade Kits include all necessary fittings and accessories.
     A B C D E Sensor (sold separately) Weight (g) Price
    GGE 14-120-FB 14 120 28 25 M3 LES-5…/ SEO 10 54 $35.25
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    SenSorS, ConneCtorS and aCCeSSOrieS
    J-Box... Sensor Logic Box
    J-Box… Klemmkasten für Sensorsteuerung
    • Minimize interface wiring and maximize utilization of controller inputs by providing termination/ power distribution
    points for up to 8 inputs.
    • Inputs/ Outputs can be either current sourcing (PNP), sinking (NPN), or a combination of the two
    • Includes enclosure and cable grips
    • Accessible terminals allow for easy wiring
    • May be installed into "Snap Track" on DIN mounting
    • Solid State logic for long life
    • KK's provide "Pass Through" functionality
    • RPL's provide "AND" Logic functionality
    • RPL can convert PNP signals to NPN and NPN signals to PNP
    • US PAT. #6,812,593
    Bottom
    JBM... Junction Box Mount
    • Gives the ability to mount PJBs to profile.
    JBM... Befestigung für RPL
     Inputs Logic
    Supply Voltage
    (VDC)
    Signal Output Signal Output A B C D E F
    Weight
    (g)
    Price
    RPL 2 2 AND (series) 15-35 PNP / NPN / RELAY 'C' PNP / NPN / RELAY "C" 94 56 65 79 50 4.5 179 $91.50
    RPL 4 4 AND (series) 15-35 PNP / NPN / RELAY 'C' PNP / NPN / RELAY "C" 94 56 65 79 50 4.5 184 $120.00
    RPL 6 6 AND (series) 15-35 PNP / NPN / RELAY 'C' PNP / NPN / RELAY "C" 130 56 94 115 79 4.5 280 $149.00
    RPL 8 8 AND (series) 15-35 PNP / NPN / RELAY 'C' PNP / NPN / RELAY "C" 130 56 94 115 79 4.5 297 $179.25
    KK 1 1-4 Pass Through / Wireable AND 15-35 (same as input) same as input 94 56 65 79 50 4.5 182 $58.75
    KK 2 1-8 Pass Through / Wireable AND 15-35 (same as input) same as input 130 56 94 115 79 4.5 298 $88.25
    A B C Weight (g) Price
    JBM 4 118 44 7 75 $25.52
    JBM 8 150 38 7 73 $26.25
    + sas-automation.com | 99
    VTB... Manifold Block
    • Allows for multiple porting of pneumatic vacuum or
    air circuits
    • Assures stable attachment to frame profile
    • Aligns tubing parallel to the frame for clean
    plumbing
    VTB… Luftverteiler
    Pneumatik, Adapter
    und Schlauchleitungen
    PneuMatic acceSSORieS
    Pneumatic acceSSORieS
    LVT... Manifold Block
    • Allows for multiple porting of pneumatic vacuum or air circuits
    • Ports in 5 directions for easy distribution
    • Spread out port design accomodates large fittings
    LVT… Luftverteiler
    LVT…
    VPI... Manifold Block
    • Can mount to SAS aluminum profile or a
    custom plate
    • Have 1/4 and 3/8 inlets and 1/8 and 1/4
    outlets
    • Have outlets from 2 to 8
    A B C D Profile Weight (g) Price
    VTB M5 L ~ M5 15 ~ L 23 $18.47
    VTB 1/4 X G 1/4" G 1/8" 22 ~ X/D 41 $11.75
    VTB 2-1-1/4 X G 1/4" G 1/8" 22 20 X/D 63 $12.50
    VTB 2-2-1/4 X G 1/4" G 1/8" 22 20 X/D 69 $14.50
    VTB 1/4 JX G 1/4" G 1/8" 30 ~ JX 47 $12.00
    VTB 2-1-1/4 JX G 1/4" G 1/8" 30 20 JX 71 $14.73
    VTB 2-2-1/4 JX G 1/4" G 1/8" 30 20 JX 75 $14.50
    A B (5 Places) Profile Weight (g) Price
    LVT M5 22 M5 L/X 29 $7.25
    LVT 1/8 X 32 G 1/8" X/HX/D 56 $9.00
    LVT 1/4 X 38 G 1/4" X/JX/HX/D 80 $15.29
    A B C D E F
    Weight
    (g)
    Price
    VPI 1-2-1/4 23 23 50 20 G 1/4 G 1/8 67 $20.03
    VPI 1-2-3/8 26 26 60 20 G 3/8 G 1/4 92 $17.50
    VPI 1-4-1/4 23 23 86 20 G 1/4 G 1/8 103 $22.25
    VPI 1-4-3/8 26 26 100 20 G 3/8 G 1/4 139 $21.50
    VPI 1-6-1/4 23 23 122 20 G 1/4 G 1/8 138 $24.78
    VPI 1-6-3/8 26 26 140 20 G 3/8 G 1/4 184 $24.65
    VPI 1-8-1/4 23 23 158 20 G 1/4 G 1/8 67 $27.75
    VPI 1-8-3/8 26 26 180 20 G 3/8 G 1/4 247 $29.06
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    WLS... Long angle connector
    • Allows for low-profile height by mounting vacuum cups directly to the
    frame
    • Adjusts parallel & perpendicular to the profile
    • Extra port can connect vacuum to another cup
    WLS… Winkelstück (lang)
    WSS... angle connector
    • Allows for low profile height by mounting vacuum cups
    directly to the frame profile
    • Adjustable along the channel of the frame profile
    • Extra port can connect vacuum to another cup
    WSS… Winkelstück
    SAS... Vacuum cup connector
    • Provides minimum profile height, allowing vacuum cups to be
    mounted to the side of the frame profile
    • Adjustable along the channel of the frame profile
    SAS… Saugeranschluss (seitlich)
    Pneumatic acceSSORieS
    A B C D E F G Profile Weight (g) Price
    WLS M5 M5 16 16 45 M5 6 13 L/X 28 $13.88
    WLS 1/8 G 1/8" 25 23 57 G 1/8" 8 16 X/HX/D 68 $18.25
    WLS 1/4 G 1/4" 25 23 57 G 1/8" 8 16 X/JX/HX/D 67 $18.25
    A B C D E Profile
    Weight
    (g)
    Price
    WSS M5 L M5 16 32 18 M5 L 18 $12.00
    WSS 1/8 X G 1/8" 25 46 25 G 1/8" X 47 $14.75
    WSS 1/4 X G 1/4" 25 46 25 G 1/8" X 47 $15.50
     A B C D E Profile Weight (g) Price
    SAS 1/8 G 1/8" G 1/8" 16 25 38 L/X/D 43 $10.75
    SAS 1/4 G 1/4" G 1/8" 16 25 38 X/JX/HX/D 42 $10.75
    + sas-automation.com | 101
    H... Male connector
    • One-touch male fitting
    • Fits standard female threads: BSP, BSPT, G, Rc
    H… Steckverschraubung (gerade)
    H... Straight unions
    • One-touch straight union fitting
    PneuMatic acceSSORieS
    Pneumatic acceSSORieS
    L... union elbows
    • One-touch union elbow fitting
    L… Schlauchschnellverbinder (90º)
    • One-touch male elbow fitting
    • Fits standard female threads: BSP, BSPT, G, Rc
    L... Male elbow
    L…Steckverschraubung L
    H… Steckverschraubung (gerade)
    A
    (Tubing Size)
    B
    (Male Thread)
    Weight (g) Price
    H04-M3-10 4 M3 x .5 22 $46.40
    H04-M5-10 4 M5 x .8 35 $16.10
    H04-01S-10 4 R 1/8" 130 $16.20
    H04-02S-10 4 R 1/4" 138 $19.00
    H06-M5-10 6 M5 x .8 44 $29.50
    H06-01S-10 6 R 1/8" 57 $21.80
    H06-02S-10 6 R 1/4" 116 $21.80
    H08-01S-10 8 R 1/8" 118 $19.60
    H08-02S-10 8 R 1/4" 128 $24.40
    * Sold in Packs of 10
    A
    (Tubing Size)
    B
    (Tubing Size)
    Weight
    (g)
    Price
    H04-00-10 4 4 16 $23.20
    H04-06-10 4 6 20 $32.60
    H06-00-10 6 6 21 $23.20
    H06-08-10 6 8 28 $28.60
    H08-00-10 8 8 35 $28.00
    * Sold in Packs of 10
    A
    (Tubing Size)
    B
    (Male Thread)
    Weight (g) Price
    L04-M3-10 4 M3 x .5 24 $42.60
    L04-M5-10 4 M5 x .8 34 $27.10
    L04-01S-10 4 R 1/8" 82 $23.00
    L04-02S-10 4 R 1/4" 133 $27.60
    L06-M5-10 6 M5 x .8 36 $32.50
    L06-01S-10 6 R 1/8" 51 $25.50
    L06-02S-10 6 R 1/4" 139 $28.20
    L08-01S-10 8 R 1/8" 58 $32.60
    L08-02S-10 8 R 1/4" 134 $34.40
    * Sold in Packs of 10
    A
    (Tubing Size)
    B
    (Tubing Size)
    Weight (g) Price
    L04-00-10 4 4 34 $24.40
    L06-00-10 6 6 26 $26.40
    L08-00-10 8 8 77 $31.80
    * Sold in Packs of 10
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    T... Male Branch tee
    • One-touch male branch tee fitting
    • Fits standard female threads: BSP, BSPT, G, Rc
    T… Steckverschraubung
    T... union tee
    T..Schlauchschnellverbinder
    • One-touch union tee fitting
    S... internal Hex Male connector
    • Internal hex one-touch male connector
    • Can be used in tight spaces where
    wrenches or sockets can’t fit
    • Fits standard female threads: BSP,
    BSPT, G, Rc
    S…
    S… Steckverschraubung Innensechskant
    Pneumatic acceSSORieS
    A
    (Tubing Size)
    B
    (Tubing Size)
    Weight (g) Price
    T04-M5-10 4 M5 x .8 39 $37.00
    T04-01S-10 4 R 1/8" 51 $32.20
    T06-M5-10 6 M5 x .8 48 $39.40
    T06-01S-10 6 R 1/8" 56 $35.40
    T06-02S-10 6 R 1/4" 202 $36.40
    T08-01S-10 8 R 1/8" 139 $43.80
    T08-02S-10 8 R 1/4" 234 $41.80
    * Sold in Packs of 10
    A
    (Tubing Size)
    B
    (Tubing Size)
    Weight (g) Price
    T04-00-10 4 4 27 $28.80
    T04-06-10 4 6 33 $40.80
    T06-00-10 6 6 69 $36.20
    T06-08-10 6 8 82 $41.00
    T08-00-10 8 8 64 $41.80
    * Sold in Packs of 10
    A
    (Tubing Size)
    B
    (Male Thread)
    Weight (g) Price
    S04-M5-10 4 M5 x .8 30 $21.80
    S04-01S-10 4 R 1/8" 80 $21.80
    S06-M5-10 6 M5 x .8 36 $23.00
    S06-01S-10 6 R 1/8" 64 $23.40
    S06-02S-10 6 R 1/4" 125 $24.00
    S08-01S-10 8 R 1/8" 122 $26.40
    S08-02S-10 8 R 1/4" 111 $25.60
    * Sold in Packs of 10
    + sas-automation.com | 103
    S…
    P... Plug
    • Plugs for one-touch fittings
    • Ideal for testing or for blocking off unnecessary air lines
    P… Schnellverschluss
    P…
    AS... Flow control
    • One-touch flow control
    • Fine control of gripper and cylinder speed
    without loss of clamping pressure
    • Can be used on inlet or exhaust ports
    AS… Durchflussregler ( 90º )
    ASP… Durchflussregler mit Rückschlagventil
    • One-touch flow control
    • Allows for fine control of gripper and cylinder speed withough loss of
    clamping pressure
    • Can be used on inlet or exhaust ports
    • Pilot Check Valve gives added security by providing a back up air
    supply
    ASP... Flow control with Pilot check Valve
    * Sold Individually
    PneuMatic acceSSORieS
    Pneumatic acceSSORieS
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    A Weight (g) Price
    P-04-10 4 7 $7.20
    P-06-10 6 10 $8.20
    P-08-10 8 12 $10.80
    * Sold in Packs of 10
    A (Tubing
    Size)
    B (Male Thread) Flow Weight (g) Price
    AS1201F-M5-04 4 M5 x .8 Meter Out 6 $10.88
    AS1211F-M5-04 4 M5 x .8 Meter In 6 $10.88
    AS2201F-01-06S 6 R 1/8" Meter Out 15 $14.95
    AS2211F-01-06S 6 R 1/8" Meter In 15 $14.65
    * Sold Individually
    A
    B (Female
    Thread)
    C (Male
    Thread)
    D (Tubing
    Size)
    Max
    Operating
    Pressure
    (bars)
    Min
    Operating
    Pressure
    (bars)
    Flow Rate (?/
    min)
    Price
    ASP330F-01-06S 40 M5 R 1/8" 6 10 1 180 $35.90
    ASP430F-02-06S 49 G 1/8" R 1/4" 6 10 1 330 $39.90
    ASP430F-02-08S 49 G 1/8" R 1/4" 8 10 1 350 $39.90
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    BVC…
    BVU…
    PC4-M5M PC4-01M
    PC6-M5M PC6-01M
    PL4-M5M PL4-01M
    PL6-M5M PL6-01M
    PU4M
    PU6M
    Quick Release Coupling
    • Quick release couplings for faster tool changes
    • Replacement couplings for SWM series
    Quick Change Mounting Chucks
    Stecknippel weiblich
    BVC & BVU... Ball Valves with One-touch Fitting
    BVC & BVU… Mini-Schnellentlüftungsventil
    • Compact lightweight ball valves
    • Limited loss of air flow in open state
    • Unique handle for air flow adjustment
    PC, PU, PL... Micro One-touch Fittings
    • Miniature one-touch fittings
    • Fits standard female threads BSP,
    BSPT, G, Rc
    PC, PU, & PL…Schlauchschnellverbinder ultraklein
    Pneumatic acceSSORieS
    Male
    Connector
    Male Thread
    Tubing
    Size
    Weight
    (g)
    Price
    BVC01-4 R 1/8" 4 ~ $14.47
    BVC01-6 R 1/8" 6 16 $14.47
    Straight
    Union
    Tubing Size
    Tubing
    Size
    Weight
    (g)
    Price
    BVU4-4 4 4 13 $15.77
    BVU6-6 6 6 14 $13.55
    Male Connector Tubing Size Thread Size Weight (g) Price
    PC4-M5M 4 M5 x 0.8 ~ $38.03
    PC4-01M 4 R 1/8" ~ $28.93
    PC6-M5M 6 M5 x 0.8 45 $39.43
    PC6-01M 6 R 1/8" 59 $30.33
    * Sold in Packs of 10
    Straight Union Tubing Size Tubing Size Weight (g) Price
    PU4M 4 4 ~ $50.17
    PU6M 6 6 ~ $51.57
    * Sold in Packs of 10
    Male Elbow Tubing Size Thread Size Weight (g) Price
    PL4-01M 4 R 1/8" 63 $43.87
    PL4-M5M 4 M5 x 0.8 ~ $38.00
    PL6-01M 6 R 1/8" 71 $44.80
    PL6-M5M 6 M5 x 0.8 41 $53.90
    * Sold in Packs of 10
    A
    (Male Thread)
    B
    (Series)
    Weight (g) Price
    92-5002 M5 x .8 20 8 $5.95
    92-0204 R 1/8" 21 27 $7.55
    92-0406 R 1/4" 26 73 $6.95
    + sas-automation.com | 105
    CPSE CPSE-M
    CPPE CPPE-M
    CPSE & CPPE... Micro Quick Disconnects
    • Miniature couplings and plugs with one-touch hose connections
    • Stainless Steel body for durability and chemical resistance
    CPSE & CPPE… Mirco-Verbindungsstück
    Quick Release Plug
    • Quick Release plugs for fast tool changes
    • EOAT plugs for mating SWM couplings
    Quick Release Plug w/ Hose connector
    • Quick Release Plugs with hose connectors for fast tool changes
    • EOAT plugs for mating SWM couplings
    Stecknippel männlich
    Stecknippel mit Schlauchverschraubung
    DMC… Multi-port tube connector
    • Quick change all your hose connections with one plug
    • Cover can be removed from socket side for panel mounting
    • Working Pressure up to 1.0 MPa
    DMC… Mehrfach Schlauchverbinder
    PneuMatic acceSSORieS
    Pneumatic acceSSORieS
    Plugs Ports A B C D E F G H
    Weight
    (g)
    Price
    DMC-04-06P 6 4 37 ~ ~ ~ 60 56 ~ 87 $15.25
    DMC-06-06P 6 6 37 ~ ~ ~ 60 56 ~ 84 $15.25
    DMC-04-12P 12 4 47 ~ ~ ~ 70 56 126 126 $21.00
    DMC-06-12P 12 6 47 ~ ~ ~ 70 56 120 120 $16.75
    Sockets Ports A B C D E F G H
    Weight
    (g)
    Price
    DMC-04-06S 6 4 44 44 36 4.5 ~ ~ 41 ~ $15.25
    DMC-06-06S 6 6 44 44 36 4.5 ~ ~ 41 82 $15.25
    DMC-04-12S 12 4 53 55 43 4.5 ~ ~ 51 115 $17.80
    DMC-06-12S 12 6 53 55 43 4.5 ~ ~ 51 114 $22.25
    A (Female Thread) B (Series) Weight (g) Price
    94-4902-10 M5 x .8 20 26 $14.40
    94-0104-10 G 1/8" 21 143 $18.60
    94-0306-10 G 1/4" 26 246 $31.46
    * Sold in Packs of 10
    A (Tubing Size)
    B
    (Series)
    Weight (g) Price
    94-0403-10 4 20 50 $21.60
    94-0604-10 6 21 150 $19.60
    94-0806-10 8 26 180 $37.77
    * Sold in Packs of 10
    Disconnect Type Disconnect Size
    Connector
    Type
    Connector Size Weight (g) Price
    CPPE3-4 Plug 3mm One-Touch 4mm tube ~ $4.20
    CPPE7-6 Plug 7mm One-Touch 6mm tube 6 $4.43
    CPPE3-M5 Plug 3mm Male Thread M5 X .8 ~ $2.57
    CPPE7-M5 Plug 7mm Male Thread M5 X .8 ~ $2.80
    CPSE3-4 Coupler 3mm One-Touch 4mm tube ~ $14.93
    CPSE7-6 Coupler 7mm One-Touch 6mm tube 13 $16.33
    CPSE3M-4 Coupler 3mm One-Touch 4mm tube ~ $16.33
    CPSE7M-6 Coupler 7mm One-Touch 6mm tube ~ $18.90
    LH
    A
    B
    LE-FM5
    A
    B
    C
    LH
    A
    A
    LB-0640-M5
    A
    B
    C
    LB-FM5-M5
    B
    A
    C
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    LC
    A
    LN
    A
    LP
    A
    LL-FM5
    A
    B
    B
    Adapter für Druckluftschläuche
    LC, LH, LB, LN, LP, LL, & LE... Barbed Fittings
    Hex Bushing
    • Fits male threads BSP, BSPT, G, R
    • Fits female threads BSP, BSPT, G, Rc
    Reduction Bushing
    • Fits male threads BSP, BSPT, G, R
    • Fits female threads BSP, BSPT, G, Rc
    Reduziernippel
    Reduziernippel
    Pneumatic acceSSORieS
    T-Fittings A (Type) A (Size) B (Type) B (Size) C (Type) C (Size) Weight (g) Price
    LB-0640-M5 Barbed 4mm Male M5 Barbed 4mm 62 $25.90
    LB-FM5-M5 Female M5 Male M5 Female M5 78 $25.90
    LL-FM5 Female M5 Female M5 ~ ~ 57 $12.13
    LE-FM5 Female M5 Female M5 Female M5 ~ $12.13
    * Sold in Packs of 10
    Straight Connectors A (Type) A (Size) B (Type) B (Size) Weight (g) Price
    LC-0425-M5 Male M5 Barbed 2.5mm 16 $9.10
    LC-0640-M5 Male M5 Barbed 4mm 18 $9.10
    LN-M5-M5 Male M5 ~ ~ ~ $7.70
    LP-M5 Male M5 ~ ~ 14 $7.70
    * Sold in Packs of 10
    Elbow Fittings A (Type) A (Size) B (Type) B (Size)
    Weight
    (g)
    Price
    LH-0425-M5 Male M5 Barbed 2.5mm 53 $25.90
    LH-0640-M5 Male M5 Barbed 4mm 57 $25.90
    LH-FM5-M5 Male M5 ~ ~ 65 $25.90
    * Sold in Packs of 10
    A (Female Thread) B (Male Thread) Price
    66-0201-10 G 1/8" R 1/8" $13.60
    66-0403-10 G 1/4" R 1/4" $19.00
    * Sold in Packs of 10
    A (Female Thread) B (Male Thread) Weight (g) Price
    70-5041** M3 x .5 M5 x .8 11 $4.07
    70-0249-10 M5 x .8 R 1/8" 73 $13.60
    70-0401-10 G 1/8" R 1/4" 122 $13.20
    66-2050-10 G 1/8" M5 x .8 75 $13.60
    66-0401-10 G 1/4" R 1/8" 145 $17.20
    70-0604-10 G 1/4" R 3/8" 131 $14.60
    66-0604-10 G 3/8" R 1/4" 199 $30.60
    Sold in packs of 10 ** Sold Individually
    + sas-automation.com | 107
    Hex Nipple
    Doppelnippel
    • Fits female threads BSP, BSPT, G, Rc
    Pipe Coupling
    Muffe
    • Fits male threads BSP, BSPT, G, R
    Pipe Plug
    • Fits female threads BSP, BSPT, G, Rc
    Verschlussschraube
    PneuMatic acceSSORieS
    Pneumatic acceSSORieS
    Pneumatic Tubing
    • Additional colors available upon request
    • Flexible pneumatic hose tubing
    • Polyurethane material reduces “kinking”
    • Supports pressurized air up to 0.8 Mpa (116 psi)
    • Recommended pneumatic color code: blue for pressurized air, yellow for vacuum
    Druckluftschlauch
    A (Male Thread) B (Male Thread) Weight (g) Price
    41-5050-10 M5 x .8 M5 x .8 25 $9.80
    42-0202-10 R 1/8" R 1/8" 88 $12.20
    43-0250-10 R 1/8" M5 x .8 76 $13.60
    42-0404-10 R 1/4" R 1/4" 161 $17.80
    43-0402-10 R 1/4" R 1/8" 149 $17.60
    * Sold in Packs of 10
    A
    (Female Thread)
    B
    (Female Thread)
    Weight (g) Price
    60-49-10 M5 x .8 M5 x .8 31 $9.60
    59-01-10 G 1/8" G 1/8" 84 $11.40
    59-03-10 G 1/4" G 1/4" 189 $18.00
    60-5002-10 G 1/8" M5 x .8 93 $16.60
    60-0204-10 G 1/4" G 1/8" 145 $17.20
    * Sold in Packs of 10
    A
    (Female Thread)
    Weight (g) Price
    21-50-10 M5 x .8 21 $16.00
    23-02-10 R 1/8" 67 $16.60
    23-04-10 R 1/4" 154 $18.00
    * Sold in Packs of 10
    Outside Ø Inside Ø Material Color Weight (g) Price
    03-0403 - 20 meter roll 4 2.5 Polyurethane Black 600 $16.98
    03-0403 - 100 meter roll 4 2.5 Polyurethane Black 1320 $80.75
    03-0403B - 20 meter roll 4 2.5 Polyurethane Blue 180 $16.98
    03-0403B - 100 meter roll 4 2.5 Polyurethane Blue 1338 $80.75
    03-0403Y - 20 meter roll 4 2.5 Polyurethane Yellow 200 $16.98
    03-0403Y - 100 meter roll 4 2.5 Polyurethane Yellow 1338 $80.75
    03-0604 - 20 meter roll 6 4 Polyurethane Black 465 $22.35
    03-0604 - 100 meter roll 6 4 Polyurethane Black 2330 $106.25
    03-0604B - 20 meter roll 6 4 Polyurethane Blue 440 $22.35
    03-0604B - 100 meter roll 6 4 Polyurethane Blue 5040 $106.25
    03-0604Y - 20 meter roll 6 4 Polyurethane Yellow 440 $22.35
    03-0604Y - 100 meter roll 6 4 Polyurethane Yellow 2380 $106.25
    03-0805 - 20 meter roll 8 5 Polyurethane Black 795 $39.55
    03-0805 - 100 meter roll 8 5 Polyurethane Black 4260 $167.06
    03-0805B - 20 meter roll 8 5 Polyurethane Blue 836 $39.55
    03-0805B - 100 meter roll 8 5 Polyurethane Blue 3945 $167.06
    03-0805Y - 20 meter roll 8 5 Polyurethane Yellow 763 $39.55
    03-0805Y - 100 meter roll 8 5 Polyurethane Yellow 3990 $167.06
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    TC... tubing cutter
    • 6 cutting edges on each blade insert
    • One handed operation and cutter lock
    • Integrated 1m tape measure
    TC… Schlauchschneider
    TC…
    Pneumatic acceSSORieS
    CTM… Kabel- und Schlauchbock
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    CTM... cable and Hose
    • Convenient wiring and tubing tie-down twists tightly into
    standard frame profile
    • Easily moveable and removeable
    • CTM-15 designed to fit into L, X, & D profiles
    • CTM-25 designed to fit into JX & HX profiles
    * Sold in Packs of 10
    Max Tubing Size Weight (g) Price
    TC-21 15mm / 1/2" 58 $11.00
    A B C
    Weight
    (g)
    Price
    CTM-15 12 15 16 11 $14.00
    CTM-25 18 25 16 21 $16.00
    + sas-automation.com | 109
    Leichtgreifer-
    Systemkomponenten
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    AC & MA... In-House End of Arm Tooling Kit
    • Kits include AC-2210 mounting
    plate for Star, Seiki, and Yushin
    robots
    • Kits included four reinforced
    silicone Vacuum cups
    AC & MA… Greifer-Bausatz
    LIgHTwEIgHT grIppEr SySTEm ComponEnTS
    Lightweight gripper SySTEm ComponEnTS
    A B C D Weight (g) Price
    AC-2510 250 10 20.5 4.5 ~ $14.00
    AC-2512 250 12 20.5 4.5 55 $14.00
    AC-3010 300 10 20.5 4.5 ~ $16.33
    AC-3012 300 12 20.5 4.5 65 $16.33
    AC-3510 350 10 20.5 4.5 79 $18.67
    AC-3512 350 12 20.5 4.5 ~ $18.67
    Approx. Rahmen
    Dimensions (mm)
    Vacuum Cups
    Tubing Ø (O.D/
    I.D.)
    Price
    EOAT KIT Grip-It 4-Cup 250 W x 440 L 4 6/4 $128.00
    EOAT KIT Grip-It 8-Cup 251 W x 440 L 8 6/4 $158.00
    A B C Robot Mounting Pattern Weight (g) Price
    AC-2210 250 100 20 Star, Seiko,Yushin 495 $42.00
    AC-2240 250 140 20 Harmo, Sailor 638 $29.00
    M Weight (g) Price
    AC-10 M10 x 1 7 $2.33
    AC-12 M12 x 1 6 $2.33
    Plane Nut Screw Spacer Weight (g) Price
    AC-1000 2 4 2 74 $8.48
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    SP... S-Series Vacuum Cups
    • Available in standard and reinforced silicone
    • SPBS-21 is specifically designed to work well on textured surfaces
    SP… Sauger, S-Serie
    SA... S-Series Vacuum Cups with Silicone Felt
    • Recommended for molded parts that
    require vacuum metalizing or coating
    SA… Sauger mit Silikonkissen, S-Serie
    Lightweight gripper SySTEm ComponEnTS
    Screw Mount Type - Standard Silicone
    Cup Ø Cup Height Applicable Holder Price
    SP-13S 13 12
    SA-02L-…/
    SAB-02L-12-5/
    SAF-02L-12-5
    $2.80
    SP-20S 20 12 $2.80
    SP-30S 30 12 $3.38
    SP-80S 80 42 SA-04L-16 $71.50
    Screw Mount Type - Reinforced Silicone
    Cup Ø Cup Height Applicable Holder Price
    SP-13SR 13 12
    SA-02L-…/
    SAB-02L-12-5/
    SAF-02L-12-5
    $2.92
    SP-20SR 20 12 $2.92
    SP-30SR 30 12 $3.62
    SP-60SR 60 14 SA-03L-16 $11.90
    Bellow Type - Standard Silicone
    Cup Ø Cup Height Applicable Holder Price
    SPBS-21 21 19
    SA-02L-…/
    SAB-02L-12-5/
    SAF-02L-12-5
    $6.30
    Bellow Type - Reinforced Silicone
    Cup Ø Cup Height Applicable Holder Price
    SPBE-08R 8 15
    SA-01L-
    $4.78
    SPBE-10R 10 20 $4.78
    SPBE-12R 12 17 $5.13
    SPBE-20R 20 25
    SA-02L-
    SAB-02L-12-5
    SAF-02L-12-5
    $5.25
    Insert Type - Standard Silicone
    Cup Ø Cup Height Applicable Holder Price
    SP-06 6 12
    SA-01L-
    $1.87
    SP-08 8 12 $2.33
    SP-09 9 12 $2.33
    SP-13 13 12 $2.80
    SP-15 15 16
    SA-02L-
    SAB-02L-12-5
    SAF-02L-12-5
    $2.92
    SP-20 20 16 $3.15
    SP-30 30 16 $3.28
    SP-40 40 16 $3.62
    Insert Type - Reinforced Silicon
    Cup Ø Cup Height Applicable Holder Price
    SP-06R 6 12
    SA-01L-...
    $2.10
    SP-08R 8 12 $2.57
    SP-09R 9 12 $2.57
    SP-13R 13 12 $2.92
    SP-15R 15 16
    SA-02L-…/
    SAB-02L-12-5/
    SAF-02L-12-5
    $3.27
    SP-20R 20 16 $3.50
    SP-30R 30 16 $3.62
    SP-40R 40 16 $3.97
    Standard
    Silicone
    Cup Ø Cup Height Applicable Holder Price
    SA-08G 8 13.5 SA-01L-… $4.67
    SA-09G 9 14 SA-01L-… $4.67
    SA-13G 13 14 SA-01L-… $5.83
    SA-15G 15 17.5
    SA-02L-…/
    SAB-02L-12-5/
    SAF-02L-12-5
    $5.83
    SA-20G 20 17.5 $6.88
    SA-30G 30 17.5 $6.88
    SA-40G 40 17.5 $7.70
    + sas-automation.com | 111
    HP... H-Series Vacuum Cups / Suction Cups
    • Available in standard and reinforced silicone rubber
    • HP-30B is made of Nitrile Butadiene Rubber (NBR)
    HP… Sauger, H-Serie
    SA... S-Series Anti-Static Vacuum Cups
    SA… Antistatische Sauger, S-Serie
    SA... Holders for S-Series Vacuum Cups
    SA… Saugerhaltevorrichtung für Sauger, S-Serie
    • Spring-loaded for part compliance
    • Side ported for quick-touch pneumatic hose connectors
    • Threaded shafts include jam nuts and lock washers for plate mounting
    • Made of conductive
    silicone rubber
    • Volume Resistivity: 0.03
    • As measured with a PP
    vessel, experimentally
    eliminated 70% of static
    electricity
    LIgHTwEIgHT grIppEr SySTEm ComponEnTS
    Lightweight gripper SySTEm ComponEnTS
    Standard
    Silicone
    Cup Outside Ø Cup Height
    Applicable
    Holder
    Weight (g) Price
    HP-06 6 12 HA-01J-… 1 $1.87
    HP-08 8 12.5 HA-01J-… 1 $2.33
    HP-10 10 14 HA-01J-… 1 $2.80
    HP-15 15 14.5 HA-01J-… 1 $2.92
    HP-20 20 15 HA-02J-… 2 $3.15
    HP-30 30 15 HA-02J-… 4 $3.38
    HP-40 40 15 HA-02J-… ~ $3.62
    HP-30B(NBR) 30 15 HA-02J-… 4 $2.33
    Reinforced
    Silicone
    Cup Outside Ø Cup Height
    Applicable
    Holder
    Weight (g) Price
    HP-06R 6 12 HA-01J-… 1 $2.10
    HP-08R 8 12.5 HA-01J-… 1 $2.57
    HP-10R 10 14 HA-01J-… 1 $2.92
    HP-15R 15 14.5 HA-01J-… 1 $3.27
    HP-20R 20 15 HA-02J-… 2 $3.50
    HP-30R 30 15 HA-02J-… 4 $3.62
    HP-40R 40 15 HA-02J-… 7 $3.97
    A B (Stroke)
    C (Mounted
    Hole Ø)
    Material Remarks Weight (g) Price
    SA-01L-10-5 M5 5 10 Aluminum Standard 11 $13.53
    SA-01L-12-10 M5 10 12 Aluminum Standard 16 $13.53
    SA-02L-10-5 M5 5 10 Aluminum Standard 13 $14.70
    SA-02L-12-5 M5 5 12 Aluminum Standard 18 $14.70
    SA-02L-12-10 M5 10 12 Stainless Standard 39 $15.75
    SA-02L-12-30 M5 30 12 Stainless Standard 44 $19.13
    SA-03L-16 M5 22 16 Steel for SP-60SR 175 $45.38
    SA-04L-16 M5 22 16 Steel for SP-80S ~ $45.38
    SAB-02L-12-5 M5 5 12 Aluminum End Ported 20 $14.00
    SAF-02L-12-5 M5 5 12 Aluminum Non-Rotational 18 $20.77
    SAE-02L-12-5 M5 5 12 Aluminum
    For Anti-Static Vacuum
    Cups
    18 $17.50
    Standard
    Silicon
    Cup Ø Cup Height Applicable Holder Price
    SA-15E 15 17.5
    SA-02L-…/ SAB-
    02L-12-5/ SAF-02L-12-5
    $3.27
    SA-20E 20 17.5 $3.62
    SA-30E 30 17.5 $3.62
    SA-40E 40 17.5 $4.20
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    YP... y-Series Vacuum Cups
    • Made of reinforced silicone rubber
    YP… Sauger, Y-Serie
    HA... Holders for H-Series Suction Cups
    HA… Saugerhaltevorrichtung für Sauger, H-Serie
    YA... Holders for y-Series Suction Cups
    YA… Saugerhaltevorrichtung für Sauger, Y-Serie
    • Spring-loaded for part compliance
    • Ported for quick-touch pneumatic hose connectors
    • Lightweight polyacetal design
    • End ported for quick-touch pneumatic hose connectors
    • Threaded shafts include jam nuts and lock washers for plate mounting
    Lightweight gripper SySTEm ComponEnTS
    Mounted
    Hole Ø
    Hub Material Remarks Weight (g) Price
    YA-8-4 8 4 Stainless Standard ~ $14.00
    YA-12-7 12 7 Aluminum End Ported 15 $15.17
    YA-12-7W 12 7 Aluminum End Ported 17 $16.80
    Reinforced
    Silicone
    Cup Ø Cup Height Applicable Holder Weight (g) Price
    YP-06R 6 12
    YA-8-4/ YA-12-7/
    YA-12-7W
    1 $3.03
    YP-08R 8 12 ~ $3.03
    YP-10R 10 12 1 $3.03
    YP-13R 13 12 1 $3.03
    YP-16R 16 12 1 $3.27
    YP-22R 20 12 ~ $3.27
    YP-30R 30 12 ~ $3.27
    YP-40R 40 12 4 $4.43
    YPBE-10R 10 21 1 $6.42
    YPBE-16R 16 21 1 $6.65
    YPBE-20R 20 21 ~ $6.88
    A B C (Stroke) Mounted Hole Ø Material Weight (g) Price
    HA-01J-10 30 20 10 16 Polyacetal 16 $14.93
    HA-01J-15 41 25 15 16 Polyacetal 18 $19.83
    HA-01J-20 51 31 20 16 Polyacetal 20 $19.83
    HA-01J-25 61 36 25 16 Polyacetal 22 $21.00
    HA-01J-30 71 41 30 16 Polyacetal 24 $21.00
    A B C (Stroke) Mounted Hole Ø Material Price
    HA-02J-10 30 20 10 16 Polyacetal ~ $14.93
    HA-02J-15 41 25 15 16 Polyacetal ~ $19.83
    HA-02J-20 51 31 20 16 Polyacetal 20 $19.83
    HA-02J-25 61 36 25 16 Polyacetal 22 $21.00
    HA-02J-30 71 41 30 16 Polyacetal 24 $21.00
    + sas-automation.com | 113
    CHM11ABK
    CHM11AK14
    CHM11ACK
    CHM... grippers-normally open, Single Acting Lever gripper
    CHM… Greifer Ruhezustand:
    offen, einfach wirkend
    KMC... mini-Cylinders
    • Robust one piece construction eliminates air leaks and pressure drops
    • New non-rotational shaft
    • Single acting spring return
    KMC… Minizylinder
    ACS... Container Cylinder (Double Acting)
    ACS… Container Zylinder (Zweifach wirkend)
    • Stainless steel, lightweight, miniature air gripper
    • Single acting spring return
    • CHM11ACK has 5mm spring loaded buffer
    LIgHTwEIgHT grIppEr SySTEm ComponEnTS
    Lightweight gripper SySTEm ComponEnTS
    Working Air
    Pres. (MPa)
    Hub
    Operating
    Temperature (?C)
    A Weight (g) Price
    KMC-10 0.3-0.5 10 5~40 45 77 $22.87
    KMC-15 0.3-0.5 15 5~40 50 82 $28.00
    KMC-20 0.3-0.5 20 5~40 55 86 $30.33
    KMC-30 0.3-0.5 30 5~40 60 ~ $69.21
    Reinforced
    Silicone
    Cup Ø Cup Height Applicable Holder Weight (g) Price
    YP-06R 6 12
    YA-8-4/ YA-12-7/
    YA-12-7W
    1 $3.03
    YP-08R 8 12 ~ $3.03
    YP-10R 10 12 1 $3.03
    YP-13R 13 12 1 $3.03
    YP-16R 16 12 1 $3.27
    YP-22R 20 12 ~ $3.27
    YP-30R 30 12 ~ $3.27
    YP-40R 40 12 4 $4.43
    YPBE-10R 10 21 1 $6.42
    YPBE-16R 16 21 1 $6.65
    YPBE-20R 20 21 ~ $6.88
    Working Air Pre.
    (bars)
    Stroke
    Operating
    Temperature (?C)
    Max Extend
    force (N)
    Max Return
    Force (N)
    Price
    ACS-20W 4~6 20 5~40 390 140 $198.12
    ACS-40W 4~6 40 5~40 390 140 $198.12
    Cylinder Ø
    Working Air Pre.
    (bars)
    Operating
    Temperature (ºC)
    Price
    CHM11ABK 11 2~7 0-60 $163.33
    CHM11ACK 11 2~7 0-60 $235.67
    Blank Finger
    Gripping Force
    (N)
    Price
    CHM11AK14 1.1-3.8 $46.67
    LH
    A
    B
    LE-FM5
    A
    B
    C
    LH
    A
    A
    LB-0640-M5
    A
    B
    C
    LB-FM5-M5
    B
    A
    C
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    MA & AB... Accessories
    Zubehör Justierung
    • Accessories for GRIP-IT! cylinders and grippers
    Mini Buffer
    Ministossfänger
    • Mini Buffers or shock absorbers
    • Used to reduce cycle time, protect equipment,
    and reduce noise
    Lightweight gripper SySTEm ComponEnTS
    LC
    A
    LN
    A
    LP
    A
    LL-FM5
    A
    B
    B
    Adapter für Druckluftschläuche
    LC, LH, LB, LN, LP, LL, & LE... Barbed Fittings
    Max Absorption
    Energy (N ° m/Cycle)
    Body Thread Stroke Price
    TK-21 3 M10 x 1 6.4 $29.75
    PRO 15 5 M12 x 1 10 $47.25
    OEM-0.25M 5.5 M14 x 1.5 10 $55.50
    PRO 25 10 M14 x 1 16 $64.00
    OEM-0.5M 28 M20 x 1.5 12 $69.75
    PRO 50 29 M20 x 1.5 22 $89.00
    Description Weight (g) Price
    MA-01
    Rectangular Clamp Holder 30x50mm
    (NBR)
    33 $5.48
    MA-01S
    Rectangular Clamp Holder 30x50mm
    (Silicone)
    32 $5.72
    MA-02 Curved Clamp Holder (R100 Degrees) 43 $6.18
    MA-03 Round Plate with rubber OD 25mm 13 $3.73
    MA-04 Round Plate with rubber OD 50mm 54 $4.43
    MA-05
    Rectangular Plate with Rubber and
    Switch
    ~ $28.93
    MA-06 Serrated Metal Sprue Gripper 26 $4.67
    MA-07 Vacuum Cup Holder (SA-01L type head) 3 $5.60
    MA-08 Vacuum Cup Holder (SA-02L type head) 4 $7.47
    MA-09 Fixing Plate (steel) ~ $1.17
    MA-10 Spacer (Height 10 mm) ~ $1.17
    MA-11 Spacer (Height 15 mm) 21 $1.17
    MA-12 Extension Spacer (M10 threaded) ~ $10.27
    MA-13 Extension Spacer (M12 threaded) ~ $10.27
    AB-10
    Suction Cup Angle Bracket (mounted
    hole dia. M10)
    89 $19.83
    AB-12
    Suction Cup Angle Bracket (mounted
    hole dia. M12)
    83 $19.83
    T-Fittings A (Type) A (Size) B (Type) B (Size) C (Type) C (Size) Weight (g) Price
    LB-0640-M5 Barbed 4mm Male M5 Barbed 4mm 62 $25.90
    LB-FM5-M5 Female M5 Male M5 Female M5 78 $25.90
    LL-FM5 Female M5 Female M5 ~ ~ 57 $12.13
    LE-FM5 Female M5 Female M5 Female M5 ~ $12.13
    * Sold in Packs of 10
    Straight Connectors A (Type) A (Size) B (Type) B (Size) Weight (g) Price
    LC-0425-M5 Male M5 Barbed 2.5mm 16 $9.10
    LC-0640-M5 Male M5 Barbed 4mm 18 $9.10
    LN-M5-M5 Male M5 ~ ~ ~ $7.70
    LP-M5 Male M5 ~ ~ 14 $7.70
    * Sold in Packs of 10
    Elbow Fittings A (Type) A (Size) B (Type) B (Size)
    Weight
    (g)
    Price
    LH-0425-M5 Male M5 Barbed 2.5mm 53 $25.90
    LH-0640-M5 Male M5 Barbed 4mm 57 $25.90
    LH-FM5-M5 Male M5 ~ ~ 65 $25.90
    * Sold in Packs of 10
    + sas-automation.com | 115
    KITS... Five Varieties & Sizes
    KITS..
    If building your own gripper seems like an enormous puzzle, then take
    advantage of our gripper kits. Building your own gripper has never been
    easier.
    • Everything you need to build your EOAT
    • Includes our quick change chuck system, aluminum profile, mounting
    arms, vacuum cups, sprue plier, gripper fingers, pneumatic fittings,
    tubing, and fasteners (medium gripper kit only)
    • Kits B,C,D, and E will build one specific EOAT
    • See below for component details
    Greifer Baukästen Robotic GRIPPER KITS
    RoboTIc GRIPPER KITS
    Quick Change
    System
    Approx. Part Weight Frame Profile Shaft Diameter Part Securing Methods Price
    Medium Gripper Kit SWM <10kg (<22lbs.) X-25/25, X-50/25 14 & 20mm
    Vacuum cups, Sprue
    Pliers, & Fingers
    $3642.31
     Profile Size
    Approx. Frame
    Dimension (mm)
    # of Vacuum Cups # of Sprue Pliers Tubing Diameter (0D/ID) Price
    EOAT Kit L-18/18 without sprue plier L-18/18L 250 x 350 4 0 6/4 $466.43
    EOAT Kit L-18/18 L-18/18L 250 x 350 4 1 6/4 $599.00
    EOAT Kit X-25/25 without sprue plier X-25/25 500x650 4 0 6/4 $429.00
    EOAT Kit X-25/25 X-25/25 500x650 4 1 6/4 $629.00
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    For this example: Let’s assume a plastic injection molding process
    Before building an EOAT, these robot questions must be determined. Robot Questions:
     1) Robot make and Model _____________________________________________________________
     2) Payload: __________
     3) Attach Mounting plate pattern.
     4) Available movement pattern: 3 –axis ______, 6 –axis ______, other __________
     5) Reach of all axis: __________
     6) # of Air, vacuum and electric circuits available:
    Check Molding Conditions. Mold Questions:
     1) Mold drawings available? ___________
     2) Daylight available __________
     3) Distance between tie bars __________
     4) # of and stroke of ejector pins __________
     5) Cycle time in seconds _____________
     6) Overhead/side obstructions
     7) Temperature of ejected part: _________°C _________°F
    After looking at mold conditions answer these questions:
     1) How many cavities? __________
     2) Does the part eject easily? __________
     3) Can vacuum cups remove the part or will mechanical grippers be necessary? __________
     4) What type parts surface? ______ Smooth ______ textured ______ flat
    ______ curved ______ painted ______ coated
    End-of-Arm Tool Questions:
     1) Will the tool be used on one specific robot and press or many?
     2) Does the tool need to be switched quickly and stored?
     3) Will the tool be adjustable and reuseable?
     4) Is individual part detection needed?
     5) Do the parts need to be cut, trimmed, or separated?
     6) Can the parts be packaged straight from the press?
     7) Do inserts or labels need to be placed in the mold for the next part?
    SERVICE: HOW TO START YOUR PROJECT
    + sas-automation.com | 117
    Your inquiry or order starts with superior customer service at SAS. Whether it is your first order, and you are
    new to End-of-Arm Tooling, or you are an experienced engineer, we will help you select the components and
    tooling best for your needs at a competitive price.
    If you need ideas or solutions for putting tools together or setting up a manufacturing cell,
    just contact our experienced engineering team or technical sales staff for first class
    customer service.
    When your situation requires that you build your own EOAT at your facility with SAS components, our skilled
    technicians can train you at our centrally located EOAT training site, or we will come to you.
    SAS provides a compliment of robotic cells in our testing center to assist you in evaluating your EOAT
    requirements. This facility is also used to test End-of-Arm tools as quality assurance prior to installation.
    SAS Automation continuously provides prompt, courteous service from start to finish of any automation
    project. SAS is the only Robotic End-of-ArmTooling company that provides this high level of service throughout
    every automation project.
    Training
    SERVICE: TRAInIng
    SERVICE
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    Design & Engineering
    Unlike distributors of EOAT, SAS Automation is a
    leading manufacturer of EOAT. The SAS difference
    is significant, as our design and engineering
    department is equipped with the latest in 3D CAD
    tools to custom design and build EOAT – for any
    robot, any part, anywhere. While others may
    provide basic “drawings”, only SAS provides
    custom engineered tools from strong, lightweight
    materials that increase productivity while reducing
    robot wear and tear. All this from the most
    experienced EOAT engineering team in the industry.
    This team includes licensed and professional
    engineers.
    no company has more experience when it comes to
    designing gripper systems to make your robot grip,
    hold, locate, inspect, move, lift, release, and handle
    your part in a repeatable fashion. Whether your
    needs are to pick and place a part from the mold or
    to provide an automation cell, SAS has the technical
    talent to meet your needs. Our primary business is
    designing gripper systems that enable your robot to
    do more, so you can do less.
    Low Profile Robust Part Gripper
    3D Automation Equipment Layout Punch Press Degater w/ Interchangeable Part Nests
    and Heated Cutting Steel.
    SERVICE: DESIgn & EngInEERIng
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    + sas-automation.com | 119
    VLR 20-150
    EXTENSION ARM
    VS 2-50-P8
    VACUUM CUP
    GAF 20-C-20
    SPRING LOADED GRIPPER ARM
    GRF 20-95
    GRIPPER FINGER
    KEC 20-20
    CROSS SWIVEL CLAMP
    QCT 3
    QUICK CHANGE CHUCK
    GPM 2-20 T
    MOUNTING PLATE
    ADK 20Y T
    END CAP
    T-20/16
    TUBE PROFILE
    T-Style Tube
    Profile EOAT
    Gripper Example
    KVB 20
    CROSS CLAMP
    SERVICE: get a grip! ASSEMBLIES
    SERVICE
    A U T O M A T I O N
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    WSL 20 AL
    ANGLE CLAMP
    KBV 25-25 X
    JOINT CONNECTOR
    GSE 20-100
    GRIPPER ARM VAF 55 P U C
    VACUUM CUP
    GRZ 20-16
    GRIPPER PLIER
    GLA 20-50
    ELBOW ARM
    VTB 1/4 X
    MANIFOLD BLOCK
    X-25/25
    PROFILE
    ADK 25/25Y X
    END CAP
    GPM 2 X
    MOUNTING PLATE
    X-Style Frame
    Profile EOAT
    Gripper Example
    SERVICE: get a grip! ASSEMBLIES
    + sas-automation.com | 121
    Integrator Support
    SAS Automation is recognized as a leader in the support of
    integration companies providing the tooling and equipment
    required by the most demanding customers. SAS has
    experienced technicians who can provide on-going support and
    equipment maintenance. SAS also employs qualified designers
    who have the expertise to develop equiment that will meet the
    current and future needs of your manufacturing environment.
    SAS makes precision EOAT custom components and sub-
    assemblies using its own patented modular component-based
    end-of-arm tooling system.
    SAS is a recognized partner with KUKA and Motoman and can
    integrate with virtually any make of
    robot, globally.
    SAS Benefits:
    • End-of-Arm Tooling expertise
    • Automation Simulation (3D)
    • Installation and operator training
    • RFID technology
    • On-site service
    • Full warranty
    • Complete documentation and maintenance manuals
    • Alternative manual procedures (recovery)
    • Testing
    • Automatic and semi-automatic experience
    • Safety
    • Experience
    • Spare parts and components in-stock
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    Integration
    SERVICE: APPLICATIOnS
    SERVICE
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    On-Site Service & Installation
    • In a hurry?
    • Need more help on-site?
    • Require training or installation in your plant?
    • Will a technical sales and review call help?
     ……………or maybe “all of the above”
    Just call, and one of the SAS Service fleet of vehicles will come to your door with a single phone call. SAS
    can solve one of the most common problems associated with building End-of-Arm Tools: having what you
    need to build that special tool on-site and on-time.
    The SAS service van is equipped with thousands of parts. You can build your own EOAT, and we can even
    train you to build an EOAT on site.
    Make your start-up easier: For a “turn-key” project, SAS will design, build, transport, and
    install your finished EOAT in your plant.
    Whether your needs are to handle automotive bumpers, electrical connectors, metal wheels, or pallets, SAS
    will put the necessary components on the road to service you.
    Only SAS provides this comprehensive service for Robotic End-of-ArmTooling!
    The following is just one example (actual quote) of how the SAS traveling service team contributed to a
    successful launch of multiple tools for a major automotive supplier:
    “It is rare that a vendor has the foresight and flexibility to assess and then provide the necessary
    support during the high level of activity and emotion that often encompass a program
    launch………… Your placement of the SAS Installation Van directly at our plant, equipped with
    an array of components and the technical guidance of your sales executive so that our engineers
    could quickly build end-of-arm tools on-site, was brilliant and critical to a successful launch.”
    SERVICE: On-SITE SERVICE & InSTALLATIOn
    /
    CNC
    /
    (EOAT)
    TCS...
    QCB...
    GHV...EOAT
    EVC...
    EVH...
    GNE...
    GRZ...
    GSP...
    MP (25, 35, 35A)... Kit sensore per tronchese taglia materozza
    Cl...
    GCK...
    TCN...
    TPS...
    ASP...
    CTM...
    + sas-automation.com | 123
    Contents
    Industries & Applications
    End of Arm Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . 2
    Plastics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
    Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
    Palletizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
    General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
    Robotic Interface
    Quick Change Chuck System . . . . . . . . . . . . . . . . . 18
    SWM... Quick Change Mounting Chuck . . . . . . . . . . . . . . . . . 18
    GPM... Quick Change Mounting Plates . . . . . . . . . . . . . . . . . 19
    SWM SA... Semi-Automatic Quick Change Mounting Chuck . . . . . . . . 20
    GPM SA... Semi-Automatic Quick Change Mounting Plates . . . . . . . 20
    GPG... Spring Loaded Quick Change Mounting Plates . . . . . . . . . . 21
    GHV... Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
    GHV... Rack for EOAT Storage . . . . . . . . . . . . . . . . . . . . . . 22
    QSR...Semi-Automatic Tool Changer . . . . . . . . . . . . . . . . . . 22
    QST... Semi-Automatic Tool Changer . . . . . . . . . . . . . . . . . . 23
    QMP... Mounting Plate. . . . . . . . . . . . . . . . . . . . . . . . . . 24
    QCC...Hands Free Quick Change Chuck . . . . . . . . . . . . . . . . . 24
    TAD... Tool Alignment Device . . . . . . . . . . . . . . . . . . . . . . 24
    TCS... Collision Sensors. . . . . . . . . . . . . . . . . . . . . . . . . 25
    QCI...Quick Change Interface . . . . . . . . . . . . . . . . . . . . . . 25
    RSM... Robot Standoff Mount . . . . . . . . . . . . . . . . . . . . . . 26
    Frame Components
    Frame Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
    L, X, D, JX, HX Profile... Aluminum Profiles. . . . . . . . . . . . . . . . 27
    T Profile... Tube Profile . . . . . . . . . . . . . . . . . . . . . . . . . 28
    GWP... Cannel Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
    ADK... Profile End Caps . . . . . . . . . . . . . . . . . . . . . . . . . 29
    SEC... Sealed Profile End Caps . . . . . . . . . . . . . . . . . . . . . 29
    CTM... Cable and Hose Connection . . . . . . . . . . . . . . . . . . . 29
    Frame Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . 30
    KBV... Cross Joint Connector . . . . . . . . . . . . . . . . . . . . . . 30
    KPL... Cross Joint Connector . . . . . . . . . . . . . . . . . . . . . . 30
    WIV... Angle Joint Connector. . . . . . . . . . . . . . . . . . . . . . . 30
    DKA... Profile Extension Arm. . . . . . . . . . . . . . . . . . . . . . . 31
    EPL... End Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
    EVB... Corner Joint Plate . . . . . . . . . . . . . . . . . . . . . . . . 31
    EVG... Straght Connector Plate . . . . . . . . . . . . . . . . . . . . . 32
    EVL... Connector Plate. . . . . . . . . . . . . . . . . . . . . . . . . . 32
    EVW 45... 45 Degree Connector Plate . . . . . . . . . . . . . . . . . . 32
    EVW 0-90... 0-90 Degree Connector Plate. . . . . . . . . . . . . . . . 33
    EVT... T Connector Plate. . . . . . . . . . . . . . . . . . . . . . . . . 33
    EVD... Straight Connector Plate . . . . . . . . . . . . . . . . . . . . . 33
    EVC... Cross Connector . . . . . . . . . . . . . . . . . . . . . . . . . 34
    EVH... Cross Connector . . . . . . . . . . . . . . . . . . . . . . . . . 34
    KV... Cross Connector . . . . . . . . . . . . . . . . . . . . . . . . . . 35
    SV... Butt Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . 35
    STB... Step Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
    PJ... Profile Jigs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
    KPC... Tube Parallel Clamp . . . . . . . . . . . . . . . . . . . . . . . 36
    KNC... Tube Cross Clamp . . . . . . . . . . . . . . . . . . . . . . . . 36
    KAC... Tube Angle Swivel Clamp. . . . . . . . . . . . . . . . . . . . . 36
    KEC... Tube Cross Swivel Clamp. . . . . . . . . . . . . . . . . . . . . 37
    KIC... Tube Parallel Swivel Clamp . . . . . . . . . . . . . . . . . . . . 37
    Mounting Clamps & Arms
    Mounting Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
    KVB... Cross Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
    SKS... Insert Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
    WSL... Long Angle Clamp . . . . . . . . . . . . . . . . . . . . . . . . 38
    WSL…T Top Long Angle Clamp . . . . . . . . . . . . . . . . . . . . 39
    WSL…TR Top Reversible Long Angle Clamp . . . . . . . . . . . . . . 39
    WSL…TRB Long Angle Clamp . . . . . . . . . . . . . . . . . . . . . 39
    WSL…SH Angle Clamp . . . . . . . . . . . . . . . . . . . . . . . . . 39
    WSA... Long Angle Clamp . . . . . . . . . . . . . . . . . . . . . . . . 40
    WST... Angle Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
    WST…TR Reversible Top Angle Clamp . . . . . . . . . . . . . . . . . 40
    WSY... Y-Angle Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . 41
    WSS... Angle Connector . . . . . . . . . . . . . . . . . . . . . . . . . 41
    WLS... Long Angle Connector . . . . . . . . . . . . . . . . . . . . . . 41
    WSD... Adjustable Angle Connector . . . . . . . . . . . . . . . . . . . 42
    SAS... Vacuum Cup Connector. . . . . . . . . . . . . . . . . . . . . . 42
    WSF... Long Angle Plate . . . . . . . . . . . . . . . . . . . . . . . . . 42
    Gripper Mounting Arms . . . . . . . . . . . . . . . . . . . . . . 43
    WKA... Angle Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
    GLA... Elbow Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
    GGA... Spring Loaded Elbow Arm . . . . . . . . . . . . . . . . . . . . 44
    GSE... Gripper Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
    GAF... Spring Loaded Gripper Arm. . . . . . . . . . . . . . . . . . . . 45
    GEP... Spring Loaded Gripper Arm . . . . . . . . . . . . . . . . . . . . 45
    GNE... Non-Rotational Gripper Arm . . . . . . . . . . . . . . . . . . . 46
    GSZ... Inline Spring Arm. . . . . . . . . . . . . . . . . . . . . . . . . 46
    GGE... Elbow Gripper Arm . . . . . . . . . . . . . . . . . . . . . . . . 47
    GGS... Spring Loaded Non-Rotational Gripper Arm. . . . . . . . . . . . 47
    RVA... Retracting Vacuum Arm. . . . . . . . . . . . . . . . . . . . . . 48
    Parts Handling
    Vacuum/Suction Cups . . . . . . . . . . . . . . . . . . . . . . . 49
    VC 1... Flat Vacuum Cup. . . . . . . . . . . . . . . . . . . . . . . . . 49
    VC 2... 1.5 Bellows Vacuum Cup . . . . . . . . . . . . . . . . . . . . 50
    VC 3... 2.5 Bellows Vacuum Cup . . . . . . . . . . . . . . . . . . . . 50
    VS 0... Oval Vacuum Cup . . . . . . . . . . . . . . . . . . . . . . . . 51
    CONTENTS
    Contents
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    VS 1... Flat Vacuum Cup. . . . . . . . . . . . . . . . . . . . . . . . . 51
    VS 2... 1.5 Bellows Vacuum Cup . . . . . . . . . . . . . . . . . . . . 52
    VS 3... 2.5 Bellows Vacuum Cup . . . . . . . . . . . . . . . . . . . . 52
    VCF 1... Flat Vacuum Cup / Suction Cup. . . . . . . . . . . . . . . . . 53
    VCF 2... Bellows Vacuum Cup / Suction Cup. . . . . . . . . . . . . . . 53
    VAF... Bellows Vacuum Cup With Adapter . . . . . . . . . . . . . . . . 53
    VAS... Flat Vacuum Cup With Adapter. . . . . . . . . . . . . . . . . . 53
    Vacuum Cup Cylinders and Accessories . . . . . . . . 54
    KHZ... Short Stroke Cylinder. . . . . . . . . . . . . . . . . . . . . . . 54
    DPL... Pressure Plate . . . . . . . . . . . . . . . . . . . . . . . . . . 54
    AVI... Vacuum Cup Adaptor . . . . . . . . . . . . . . . . . . . . . . . 55
    ADZ... Short Stroke Cylinder Adapter . . . . . . . . . . . . . . . . . . 55
    SZD... Special Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . 56
    SZS... Special Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . 56
    GAZ... Special Cylinder Mounting Arm. . . . . . . . . . . . . . . . . . 57
    Vacuum Generators, Regulators and Accessories . . 58
    VBH... Vacuum Generator with One-Touch Fittin. . . . . . . . . . . . . 58
    VGI... Inline Vacuum Generator . . . . . . . . . . . . . . . . . . . . . 58
    GFD... 1/4 MINI Vacuum Generator . . . . . . . . . . . . . . . . . . . 58
    VCV... Vacuum Check Valve . . . . . . . . . . . . . . . . . . . . . . . 58
    RC... Compact Air Regulator. . . . . . . . . . . . . . . . . . . . . . . 59
    RVC & RVU... Regulator with Quick Connector. . . . . . . . . . . . . . 59
    VG-30... Vacuum Generator . . . . . . . . . . . . . . . . . . . . . . . 59
    Part/Sprue Grippers, Fingers and Locators . . . . . . 60
    GRZ 10... Sprue/Parts Pliers. . . . . . . . . . . . . . . . . . . . . . . 60
    GRZ 20... Sprue/Parts Pliers (Continued) . . . . . . . . . . . . . . . . 61
    GRZ 30... Sprue/Parts Pliers (Continued) . . . . . . . . . . . . . . . . 62
    GRZ 32... Sprue/Parts Pliers (Continued) . . . . . . . . . . . . . . . . 62
    GRZ... Jaw Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
    GRF... Gripper Finger (Spring Return) . . . . . . . . . . . . . . . . . . 63
    GRF…-D Gripper Finger (Double Acting). . . . . . . . . . . . . . . . 63
    GRW... Gripper Finger (Spring Return) . . . . . . . . . . . . . . . . . . 64
    VLR... Arm Extension . . . . . . . . . . . . . . . . . . . . . . . . . . 64
    ZTS/ANS/ANF... Delrin Finger Accessories. . . . . . . . . . . . . . . . 65
    ZTB... Delrin Locator Pin . . . . . . . . . . . . . . . . . . . . . . . . 65
    SLL... Spring Loaded Locator . . . . . . . . . . . . . . . . . . . . . . 66
    IDG... Internal Diameter Gripper . . . . . . . . . . . . . . . . . . . . . 66
    GRN... Needle Gripper. . . . . . . . . . . . . . . . . . . . . . . . . . 67
    GRM... Magnetic Gripper . . . . . . . . . . . . . . . . . . . . . . . . 68
    GRB…Black Urethane Boot . . . . . . . . . . . . . . . . . . . . . . . 68
    Stroking Pneumatic Cylinders and Parallel Grippers . 69
    ISC 8... Indexing Cylinder . . . . . . . . . . . . . . . . . . . . . . . . 69
    ISC MPS... Indexing Cylinder . . . . . . . . . . . . . . . . . . . . . . 69
    RC…-S Rotary Cylinder . . . . . . . . . . . . . . . . . . . . . . . . 69
    RC…-RR Rotary Cylinder . . . . . . . . . . . . . . . . . . . . . . . 70
    PGR… Parallel Gripper . . . . . . . . . . . . . . . . . . . . . . . . . 70
    PGR... S Parallel Gripper. . . . . . . . . . . . . . . . . . . . . . . . . 71
    PGR…R Parallel Gripper . . . . . . . . . . . . . . . . . . . . . . . . 71
    LPG... Large Parallel Gripper . . . . . . . . . . . . . . . . . . . . . . 72
    ADG... Adapters for Parallel Gripper . . . . . . . . . . . . . . . . . . . 72
    VLR... Arm Extension . . . . . . . . . . . . . . . . . . . . . . . . . . 73
    LIA 380-1... Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . 73
    SPU 3-250... Polyurethane Sheet . . . . . . . . . . . . . . . . . . . . 73
    Degating Cutters, Blades and Accessories . . . . . . . 74
    MR... Sprue Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
    ME... Sprue Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
    ML... Slide & Cut Type Cutter . . . . . . . . . . . . . . . . . . . . . . 76
    SN... Pull & Cut Type Cutter . . . . . . . . . . . . . . . . . . . . . . . 77
    SNP... Push & Cut Type Cutter . . . . . . . . . . . . . . . . . . . . . . 77
    MER... Tilt & Cut Type Cutter . . . . . . . . . . . . . . . . . . . . . . 78
    MG... Slide & Cut Type Cutter . . . . . . . . . . . . . . . . . . . . . . 78
    CF... Turtle-Neck Blade Type. . . . . . . . . . . . . . . . . . . . . . . 79
    CL... Turtle-Neck Blade Type . . . . . . . . . . . . . . . . . . . . . . 79
    SC... Cutting Speed Adjustable Type. . . . . . . . . . . . . . . . . . . 80
    CP... Scissors Action Blade Type. . . . . . . . . . . . . . . . . . . . . 80
    MS/MSP... Standard Square Type/Pressure Booster Type . . . . . . . . 80
    MSF/MSFP... Lightweight Square Type/High
    Power Square Type . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
    MSK... Square Type . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
    GCK... Adjustable Gate Cutting Knife. . . . . . . . . . . . . . . . . . . 82
    TCN... Thrust Cutter Nipper . . . . . . . . . . . . . . . . . . . . . . . 82
    MR-KS... Standard Sprue Cutter Clamp . . . . . . . . . . . . . . . . . 83
    MR-AH... Sprue Holder . . . . . . . . . . . . . . . . . . . . . . . . . 83
    MR-SH... Sprue Cutter Sensor Kit . . . . . . . . . . . . . . . . . . . . 83
    Cutter Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 84
    ME-HP... Adapters for ASZ-ME Cutters. . . . . . . . . . . . . . . . . . 84
    TU-01... Timing Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . 84
    VLR... Arm Extension . . . . . . . . . . . . . . . . . . . . . . . . . . 85
    WF... Work Finisher . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
    Category I Standard Blades . . . . . . . . . . . . . . . . . . . . . . . 86
    Category I Additional Blades for Size 20 Bodies . . . . . . . . . . . . . 87
    Category I Additional Blades for Size 30 & 50 Bodies . . . . . . . . . . 88
    Category II Standard Blades. . . . . . . . . . . . . . . . . . . . . . . 89
    Category III Standard Blades . . . . . . . . . . . . . . . . . . . . . . 89
    Category IV Standard Blades . . . . . . . . . . . . . . . . . . . . . . 90
    Category V Standard Blades. . . . . . . . . . . . . . . . . . . . . . . 90
    Category VI Standard Blades . . . . . . . . . . . . . . . . . . . . . . 90
    Electrical Components
    Sensors, Connectors and Accessories . . . . . . . . . . 91
    IRK & RRK... Cylinder Sensor . . . . . . . . . . . . . . . . . . . . . . 91
    LRS & LES... Optical Sensors . . . . . . . . . . . . . . . . . . . . . . 91
    SEO & GEO... Mechanical Sensors. . . . . . . . . . . . . . . . . . . . 92
    DSD... Double Sheet Detector . . . . . . . . . . . . . . . . . . . . . . 92
    TFP & TMP... Electrical Connectors . . . . . . . . . . . . . . . . . . . 93
    TFR & TMR... Bulkhead Electrical Receptacles. . . . . . . . . . . . . . 93
    FM & FW... Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
    ABJ / PJB... Junction Boxes. . . . . . . . . . . . . . . . . . . . . . . 95
    KK & RPL... Wiring Sample Diagrams . . . . . . . . . . . . . . . . . . 96
    RVB... Robot Valve Box . . . . . . . . . . . . . . . . . . . . . . . . . 97
    GGE…-F Sensor Gripper Arm . . . . . . . . . . . . . . . . . . . . . . 97
    CONTENTS
    + sas-automation.com | 125
    JBM… Junction Box Mount. . . . . . . . . . . . . . . . . . . . . . . 98
    J-Box... Sensor Logic Box. . . . . . . . . . . . . . . . . . . . . . . . 98
    Pneumatic Accessories
    Pneumatic Accessories . . . . . . . . . . . . . . . . . . . . . 99
    VTB... Manifold Block . . . . . . . . . . . . . . . . . . . . . . . . . . 99
    LVT... Manifold Block . . . . . . . . . . . . . . . . . . . . . . . . . . 99
    VPI... Manifold Block . . . . . . . . . . . . . . . . . . . . . . . . . . 99
    WLS... Long Angle Connector . . . . . . . . . . . . . . . . . . . . . .100
    WSS... Angle Connector . . . . . . . . . . . . . . . . . . . . . . . . .100
    SAS... Vacuum Cup Connector. . . . . . . . . . . . . . . . . . . . . .100
    H... Male Connector. . . . . . . . . . . . . . . . . . . . . . . . . . .101
    H... Straight Unions . . . . . . . . . . . . . . . . . . . . . . . . . . .101
    L... Male Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
    L... Union Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
    T... Male Branch Tee. . . . . . . . . . . . . . . . . . . . . . . . . . .102
    T... Union Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
    S... Internal Hex Male Connector . . . . . . . . . . . . . . . . . . . .102
    P... Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
    AS... Flow Control. . . . . . . . . . . . . . . . . . . . . . . . . . . .103
    ASP... Flow Control with Pilot Check Valve. . . . . . . . . . . . . . . .103
    BVC & BVU... Ball Valves with One-Touch Fitting. . . . . . . . . . . . .104
    PC, PU, PL... Micro One-Touch Fittings . . . . . . . . . . . . . . . . .104
    Quick Release Coupling. . . . . . . . . . . . . . . . . . . . . . . . .104
    Quick Release Plug . . . . . . . . . . . . . . . . . . . . . . . . . . .105
    Quick Release Plug w/ Hose Connector . . . . . . . . . . . . . . . . .105
    CPSE & CPPE... Micro Quick Disconnects . . . . . . . . . . . . . . . .105
    DMC…Multi-port Tube Connector. . . . . . . . . . . . . . . . . . . .105
    LC, LH, LB, LN, LP, LL, & LE... Barbed Fittings . . . . . . . . . . . . . .106
    Hex Bushing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
    Reduction Bushing . . . . . . . . . . . . . . . . . . . . . . . . . . .106
    Hex Nipple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
    Pipe Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
    Pipe Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
    Pneumatic Tubing. . . . . . . . . . . . . . . . . . . . . . . . . . . .107
    TC... Tubing Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . .108
    CTM... Cable and Hose Connection . . . . . . . . . . . . . . . . . . .108
    Lightweight Components
    Lightweight Gripper System Components . . . . . . 109
    AC & MA... In-House End of Arm Tooling Kit . . . . . . . . . . . . . . .109
    SP... S-Series Suction Cups . . . . . . . . . . . . . . . . . . . . . . .110
    SA... S-Series Vacuum Cups with Silicone Felt . . . . . . . . . . . . .110
    SA... S-Series Anti-Static Vacuum Cups . . . . . . . . . . . . . . . . .111
    SA... Vacuum Cup Holders for S-Series Vacuum Cups . . . . . . . . . .111
    HP... H-Series Vacuum Cups. . . . . . . . . . . . . . . . . . . . . . .111
    HA... Vacuum Cup Holders for H-Series Suction Cups . . . . . . . . . .112
    YP... Y-Series Vacuum Cups . . . . . . . . . . . . . . . . . . . . . . .112
    YA... Suction Cup Holders for Y-Series Suction Cups. . . . . . . . . . .112
    KMC... Mini-Cylinders. . . . . . . . . . . . . . . . . . . . . . . . . .113
    ACS... Container Cylinder (Double Acting) . . . . . . . . . . . . . . . .113
    CHM... Grippers-Normally Open, Single
    Acting Lever Gripper . . . . . . . . . . . . . . . . . . . . . . . . . .113
    Mini Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
    MA & AB... Accessories . . . . . . . . . . . . . . . . . . . . . . . . .114
    LC, LH, LB, LN, LP, LL, & LE... Barbed Fittings . . . . . . . . . . . . . .114
    Robotic Gripper Kits
    Robotic Gripper Kits . . . . . . . . . . . . . . . . . . . . . . . 115
    KITS... Five Varieties & Sizes . . . . . . . . . . . . . . . . . . . . . .115
    Service
    How to Start Your Project . . . . . . . . . . . . . . . . . . . 116
    Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
    Design and Engineering . . . . . . . . . . . . . . . . . . . . 118
    Get a Grip! Assemblies . . . . . . . . . . . . . . . . . . . . . 119
    Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
    On-Site Service and Installation . . . . . . . . . . . . . . 122
    CONTENTS
    Contents
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    03-0403-100 Meter Roll ...............................107
    03-0403-20 Meter Roll .................................107
    03-0403B-100 Meter Roll .............................107
    03-0403B-20 Meter Roll ...............................107
    03-0403Y-100 Meter Roll .............................107
    03-0403Y-20 Meter Roll ...............................107
    03-0604-100 Meter Roll ...............................107
    03-0604-20 Meter Roll .................................107
    03-0604B-100 Meter Roll .............................107
    03-0604B-20 Meter Roll ...............................107
    03-0604Y-100 Meter Roll .............................107
    03-0604Y-20 Meter Roll ...............................107
    03-0805-100 Meter Roll ...............................107
    03-0805-20 Meter Roll .................................107
    03-0805B-100 Meter Roll .............................107
    03-0805B-20 Meter Roll ...............................107
    03-0805Y-100 Meter Roll .............................107
    03-0805Y-20 Meter Roll ...............................107
    21-50-10 .....................................................107
    23-02-10 .....................................................107
    23-04-10 .....................................................107
    41-5050-10 .................................................107
    42-0202-10 .................................................107
    42-0404-10 .................................................107
    43-0250-10 .................................................107
    43-0402-10 .................................................107
    59-01-10 .....................................................107
    59-03-10 .....................................................107
    60-0204-10 .................................................107
    60-49-10 .....................................................107
    60-5002-10 .................................................107
    66-0201-10 .................................................106
    66-0401-10 .................................................106
    66-0403-10 .................................................106
    66-0604-10 .................................................106
    66-2050-10 .................................................106
    70-0249-10 .................................................106
    70-0401-10 .................................................106
    70-0604-10 .................................................106
    70-5041** ...................................................106
    92-0204 ......................................................104
    92-0406 ......................................................104
    92-5002 ......................................................104
    94-0104-10 .................................................105
    94-0306-10 .................................................105
    94-0403-10 .................................................105
    94-0604-10 .................................................105
    94-0806-10 .................................................105
    94-4902-10 .................................................105
    AB-10 ..........................................................114
    AB-12 ..........................................................114
    AC-10 ..........................................................109
    AC-1000 ......................................................109
    AC-12 ..........................................................109
    AC-2210 ......................................................109
    AC-2240 ......................................................109
    AC-2510 ......................................................109
    AC-2512 ......................................................109
    AC-3010 ......................................................109
    AC-3012 ......................................................109
    AC-3510 ......................................................109
    AC-3512 ......................................................109
    ACS-20W .....................................................113
    ACS-40W .....................................................113
    ADG 10-R.......................................................72
    ADG 10-S .......................................................72
    ADG 14 RLP ...................................................72
    ADG 14-25 .....................................................72
    ADG 14-32 .....................................................72
    ADG 14-R.......................................................72
    ADG 14-S .......................................................72
    ADG 20-40 .....................................................72
    ADG 20-R.......................................................72
    ADG 20-S .......................................................72
    ADK 14Y T .....................................................29
    ADK 18/10 L ..................................................29
    ADK 18/18 L ..................................................29
    ADK 20Y T ......................................................29
    ADK 25/25 X ..................................................29
    ADK 30Y T ......................................................29
    ADK 40 HX .....................................................29
    ADK 50/25 X ..................................................29
    ADK 50/38 D ..................................................29
    ADK 60 HX ....................................................29
    ADZ 14-12 .....................................................55
    ADZ 20-20 .....................................................55
    ADZ 20-32 .....................................................55
    ADZ 30-32 .....................................................55
    ANF 14 ..........................................................65
    ANF 20 ..........................................................65
    ANF 30 ..........................................................65
    ANS 14 ..........................................................65
    ANS 20 ..........................................................65
    ANS 20 D .......................................................65
    ANS 30 ..........................................................65
    AS1201F-M5-04 ..........................................103
    AS1211F-M5-04 ..........................................103
    AS2201F-01-06S .........................................103
    AS2211F-01-06S .........................................103
    ASC-22 ..........................................................62
    ASP330F-01-06S .........................................103
    ASP430F-02-06S .........................................103
    ASP430F-02-08S .........................................103
    AVI 1/4I-16-8 .................................................55
    AVI 1/8I-16-5 .................................................55
    AVI 1/8I-16-8 .................................................55
    AVI 5l-8-3 ......................................................55
    BVC01-4 ......................................................104
    BVC01-6 ......................................................104
    BVU4-4 ........................................................104
    BVU6-6 ........................................................104
    CF-10 ............................................................79
    CF-20 ............................................................79
    CF-5 ..............................................................79
    CHM11ABK ..................................................113
    CHM11ACK ..................................................113
    CHM11AK14 ................................................113
    CL-10 ............................................................79
    CL-20 ............................................................79
    CL-5 ..............................................................79
    CP-10M .........................................................80
    CP-20M .........................................................80
    CP-30M .........................................................80
    CPPE3-4 ......................................................105
    CPPE3-M5 ...................................................105
    CPPE7-6 ......................................................105
    CPPE7-M5 ...................................................105
    CPSE3-4 ......................................................105
    CPSE3M-4 ...................................................105
    CPSE7-6 ......................................................105
    CPSE7M-6 ...................................................105
    CTM-15 .........................................................29
    CTM-15 .......................................................108
    CTM-25 .........................................................29
    CTM-25 .......................................................108
    D-50/38 .........................................................27
    DKA 10 L .......................................................31
    DKA 14 X .......................................................31
    DKA 20 X .......................................................31
    DMC-04-06P................................................105
    DMC-04-06S................................................105
    DMC-04-12P................................................105
    DMC-04-12S................................................105
    DMC-06-06P................................................105
    DMC-06-06S................................................105
    DMC-06-12P................................................105
    DMC-06-12S................................................105
    DPL 12-3 .......................................................54
    DPL 25-3 .......................................................54
    DPL 25-4 .......................................................54
    DPL 25-5 .......................................................54
    DSD-36 Spring Loaded Mounting Bracket ........92
    DSD-36 Control Module ..................................92
    DSD-36 Cable; 8 Conductor 5 Meters Long ......92
    DSD-36 Double Sheet Sensor ..........................92
    EOAT KIT Grip-It 4-Cup ..................................109
    EOAT KIT Grip-It 8-Cup ..................................109
    EOAT Kit L-18/18 .........................................115
    EOAT Kit L-18/18 without sprue plier .............115
    EOAT Kit X-25/25 .........................................115
    EOAT Kit X-25/25 without sprue plier .............115
    EP6UR322......................................................87
    EP6UR322C ...................................................87
    EPL 2-25 X .....................................................31
    EPL 2-50 X .....................................................31
    EPL 3-25 X .....................................................31
    EPL 3-40 JX ...................................................31
    EPL 3-50 X .....................................................31
    EPL 3-80 JX ...................................................31
    EVB 25 X ........................................................31
    EVB 40 JX .....................................................31
    EVB 50 X ........................................................31
    EVC 40/40 ....................................................34
    EVC 60/60 .....................................................34
    EVD 50/100 X ...............................................33
    EVD 50/50 X ..................................................33
    EVG 25/100 X ................................................32
    EVG 25/50 X ..................................................32
    EVG 25/75 X ..................................................32
    EVG 40/160 JX ..............................................32
    EVH 60/40-1 ..................................................34
    EVH 60/40-2 .................................................34
    EVL 50/50 X ...................................................32
    EVL 50/75 X ...................................................32
    EVL 80/120 JX ...............................................32
    EVT 100/130 D...............................................33
    EVT 100/75 X .................................................33
    EVT 100/80 D.................................................33
    EVT 120/120 JX .............................................33
    EVT 50/75 X ...................................................33
    EVW 0-90 JX ..................................................33
    EVW 0-90 X ...................................................33
    EVW 45 JX ....................................................32
    EVW 45 X .......................................................32
    F1 ..................................................................86
    F10 ................................................................86
    F10E ..............................................................89
    F10EK ............................................................89
    F10S ..............................................................86
    F1E ................................................................89
    F1EK ..............................................................89
    F1S ................................................................86
    F3 ..................................................................86
    F300 ..............................................................90
    PARTS InDEX
    + sas-automation.com | 127
    F3E ................................................................89
    F3EK ..............................................................89
    F3S ................................................................86
    F5 ..................................................................86
    F500 ..............................................................90
    F55U23 ..........................................................87
    F5E ................................................................89
    F5EK ..............................................................89
    F5NR279 .......................................................87
    F5NR329 .......................................................87
    F5S ................................................................86
    F5U1 ..............................................................87
    F5X62 ............................................................87
    F5XR302 ........................................................87
    F5XR325 ........................................................87
    F900 ..............................................................90
    F9E ................................................................89
    F9EK ..............................................................89
    F9PF ..............................................................86
    F9PNR322F ....................................................88
    F9PSF ............................................................86
    F9PVR48F ......................................................88
    F9PX60F ........................................................88
    F9PXR25F ......................................................88
    F9PZXR261F ..................................................88
    F9PZXR352F ..................................................88
    F9VP0F ..........................................................88
    F9ZXR393F ....................................................88
    FD1................................................................86
    FD10..............................................................86
    FD3................................................................86
    FD300............................................................90
    FD5................................................................86
    FD500............................................................90
    FD5A .............................................................87
    FD7................................................................86
    FD900............................................................90
    FD9PF ............................................................86
    FEP10PF ........................................................86
    FEP2 ..............................................................86
    FEP20 ............................................................86
    FEP4 ..............................................................86
    FEP6 ..............................................................86
    FEP7 ..............................................................86
    FG10..............................................................89
    FG10K............................................................89
    FG3................................................................89
    FG3K..............................................................89
    FG5................................................................89
    FG5K..............................................................89
    FM10-RS10 ...................................................94
    FM10-RS3 .....................................................94
    FM10-SS10....................................................94
    FM10-SS3......................................................94
    FM3-RR.5 ......................................................94
    FM3-RR1 .......................................................94
    FM3-RR2 .......................................................94
    FM3-RS.5 ......................................................94
    FM3-RS1 .......................................................94
    FM3-RS2 .......................................................94
    FM3-SR.5 ......................................................94
    FM3-SR1 .......................................................94
    FM3-SR2 .......................................................94
    FM3-SS.5.......................................................94
    FM3-SS1........................................................94
    FM3-SS2........................................................94
    FM5-RS10 .....................................................94
    FM5-RS3 .......................................................94
    FM5-SS10......................................................94
    FM5-SS3........................................................94
    FM8-RS10 .....................................................94
    FM8-RS3 .......................................................94
    FM8-SS10......................................................94
    FM8-SS3........................................................94
    FN1................................................................90
    FN10..............................................................90
    FN3................................................................90
    FN5................................................................90
    FNP1..............................................................90
    FNP10............................................................90
    FNP3..............................................................90
    FNP5..............................................................90
    FW10-RW10 ..................................................94
    FW10-RW5 ....................................................94
    FW10-SW10 ..................................................94
    FW10-SW5 ....................................................94
    FW3-RW2 ......................................................94
    FW3-RW4 ......................................................94
    FW3-SW2 ......................................................94
    FW3-SW4 ......................................................94
    FW5-RW10 ....................................................94
    FW5-RW5 ......................................................94
    FW5-SW10 ....................................................94
    FW5-SW3 ......................................................94
    FW5-SW5 ......................................................94
    FW8-RW10 ....................................................94
    FW8-RW5 ......................................................94
    FW8-SW10 ....................................................94
    FW8-SW5 ......................................................94
    GAF 10-C-10 .................................................45
    GAF 10-M-10 .................................................45
    GAF 14-C-15..................................................45
    GAF 14-C-40..................................................45
    GAF 14-M-15 .................................................45
    GAF 14-M-40 .................................................45
    GAF 20-C-20..................................................45
    GAF 20-C-50..................................................45
    GAF 20-M-20 .................................................45
    GAF 20-M-50 .................................................45
    GAF 30-C-80..................................................45
    GAF 30-M-80 .................................................45
    GAZ 12-10-90................................................57
    GAZ 12-14-120..............................................57
    GAZ 20-20-150..............................................57
    GAZ 32-20-150..............................................57
    GCK 20-150 ...................................................82
    GEO-10 ..........................................................92
    GEP 10-C-10..................................................45
    GEP 10-M-10 .................................................45
    GEP 14-C-15..................................................45
    GEP 14-C-40..................................................45
    GEP 14-M-15 .................................................45
    GEP 14-M-40 .................................................45
    GEP 20-C-20..................................................45
    GEP 20-C-50..................................................45
    GEP 20-M-20 .................................................45
    GEP 20-M-50 .................................................45
    GFD 1/4 MINI Vacuum Manifold .......................58
    GGA 14-C-15 .................................................44
    GGA 14-C-40 .................................................44
    GGA 20-C-20 .................................................44
    GGA 20-C-50 .................................................44
    GGE 10-90 .....................................................47
    GGE 14-120 ...................................................47
    GGE 14-120-FB ..............................................97
    GGE 14-120-FS ..............................................97
    GGE 20-150 ...................................................47
    GGE 30-200 ...................................................47
    GGS 10-C-10 .................................................47
    GGS 10-M-10 ................................................47
    GGS 14-C-15 .................................................47
    GGS 14-C-40 .................................................47
    GGS 14-C-40 SFX* .........................................47
    GGS 14-M-15 ................................................47
    GGS 14-M-40 ................................................47
    GGS 20-C-20 ................................................47
    GGS 20-C-50 .................................................47
    GGS 20-M-20 ................................................47
    GGS 20-M-50 ...............................................47
    GHV 0 ............................................................21
    GHV 1 ............................................................21
    GHV 2 ...........................................................21
    GHV 3 ...........................................................21
    GLA 10-90 .....................................................43
    GLA 14-120 ...................................................43
    GLA 20-150 ...................................................43
    GLA 20/30-150 ..............................................43
    GNE 14-C-15 ................................................46
    GNE 14-C-40 .................................................46
    GNE 14-M-15 .................................................46
    GNE 14-M-40 .................................................46
    GNE 20-C-20 .................................................46
    GNE 20-C-50 .................................................46
    GPG 1 ............................................................21
    GPG 2 ............................................................21
    GPG 3 ............................................................21
    GPM 0 ...........................................................19
    GPM 0 L .........................................................19
    GPM 0 LT .......................................................19
    GPM 0.1 ........................................................19
    GPM 0.1 LT ....................................................19
    GPM 1 ...........................................................19
    GPM 1 L .........................................................19
    GPM 1 LT .......................................................19
    GPM 1 SA ......................................................20
    GPM 1 ST .......................................................19
    GPM 1 X.........................................................19
    GPM 1-14 T ...................................................19
    GPM 2 ...........................................................19
    GPM 2 LT .......................................................19
    GPM 2 SA ......................................................20
    GPM 2 ST .......................................................19
    GPM 2 X.........................................................19
    GPM 2-14 T ...................................................19
    GPM 2-20 T ...................................................19
    GPM 3 ...........................................................19
    GPM 3 SA ......................................................20
    GPM 3 ST .......................................................19
    GPM 3 X ........................................................19
    GPM 3-20 T ...................................................19
    GPM 3-30 T ..................................................19
    GRB 127 ........................................................68
    GRB 38 ..........................................................68
    GRB 76 ..........................................................68
    GRF 14-35 .....................................................63
    GRF 14-90 .....................................................63
    GRF 14-95 .....................................................63
    GRF 20-35 .....................................................63
    GRF 20-35 D ..................................................63
    GRF 20-90 .....................................................63
    GRF 20-90 D ..................................................63
    GRF 20-95 .....................................................63
    GRF 20-95 D ..................................................63
    GRF 30-35 .....................................................63
    PARTS InDEX
    InDeX
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    GRF 30-90 .....................................................63
    GRF 30-95 .....................................................63
    GRM 127-3/8 .................................................68
    GRM 38-3/8 ...................................................68
    GRM 76-3/8 ...................................................68
    GRN 12-10 CN ...............................................67
    GRN 12-10 SL ................................................67
    GRN 12-10 X ..................................................67
    GRN 12-10-14 ...............................................67
    GRN 12-10-20 ...............................................67
    GRN 12-10-20 LP ..........................................67
    GRW 20-35 ....................................................64
    GRW 30-35 ....................................................64
    GRZ 10-10 .....................................................60
    GRZ 10-10 A ..................................................60
    GRZ 10-10 A Jaw Kit ......................................62
    GRZ 10-10 A1 ................................................60
    GRZ 10-10 A1 Jaw Kit ....................................62
    GRZ 10-10 C ..................................................60
    GRZ 10-10 C Jaw Kit ......................................62
    GRZ 10-10 Jaw Kit .........................................62
    GRZ 10-10 KT ................................................60
    GRZ 10-10 KT Jaw Kit ....................................62
    GRZ 10-10 P ..................................................60
    GRZ 10-10 ST ................................................60
    GRZ 10-10 STC ..............................................60
    GRZ 10-12 .....................................................60
    GRZ 10-12 A ..................................................60
    GRZ 10-12 C ..................................................60
    GRZ 10-12 P ..................................................60
    GRZ 10-12 ST ................................................60
    GRZ 10-12 STC ..............................................60
    GRZ 10-6 .......................................................60
    GRZ 10-8 C ....................................................60
    GRZ 20-16 .....................................................61
    GRZ 20-16 A ..................................................61
    GRZ 20-16 A Jaw Kit ......................................62
    GRZ 20-16 C ..................................................61
    GRZ 20-16 C Jaw Kit ......................................62
    GRZ 20-16 CT ................................................61
    GRZ 20-16 Jaw Kit .........................................62
    GRZ 20-16 KT ................................................61
    GRZ 20-16 KT Jaw Kit ....................................62
    GRZ 20-16 KTC ..............................................61
    GRZ 20-16 L ..................................................61
    GRZ 20-16 L Jaw Kit ......................................62
    GRZ 20-16 LC ................................................61
    GRZ 20-16 LC Jaw Kit ....................................62
    GRZ 20-16 LCT ..............................................61
    GRZ 20-16 LST ..............................................61
    GRZ 20-16 LT .................................................61
    GRZ 20-16 LT Jaw Kit .....................................62
    GRZ 20-16 R ..................................................61
    GRZ 20-16 R Jaw Kit ......................................62
    GRZ 20-16 RT ...............................................61
    GRZ 20-16 RT Jaw Kit ....................................62
    GRZ 20-16 RTC ..............................................61
    GRZ 20-16 ST ................................................61
    GRZ 20-16 STC .............................................61
    GRZ 20-16 T ..................................................61
    GRZ 20-16 T Jaw Kit.......................................62
    GRZ 20-22 .....................................................60
    GRZ 20-22 C ..................................................60
    GRZ 20-22 KTC .............................................60
    GRZ 32 ..........................................................62
    GRZ 32 C .......................................................62
    GRZ 32-30 E ..................................................62
    GRZ 32-30 EC ................................................62
    GSE 10-1/8-90...............................................44
    GSE 10-M5-90 ...............................................44
    GSE 14-120 ...................................................44
    GSE 20-150 ...................................................44
    GSE 30-200 ...................................................44
    GSE 30-3/8-200.............................................44
    GSZ 14-C-15 .................................................46
    GSZ 14-C-40 .................................................46
    GSZ 14-M-15 .................................................46
    GSZ 14-M-40 .................................................46
    GSZ 20-C-20 .................................................46
    GSZ 20-M-20 .................................................46
    GWP 4 ...........................................................28
    GWP 4-17 ......................................................28
    GWP 4-31 ......................................................28
    GWP 4-8 ........................................................28
    GWP 5 ...........................................................28
    GWP 5-10 ......................................................28
    GWP 5-12 ......................................................28
    GWP 5-14 ......................................................28
    GWP 5-16 ......................................................28
    GWP 5-22 ......................................................28
    GWP 5-25 ......................................................28
    GWP 5-28 ......................................................28
    GWP 5-38 ......................................................28
    GWP 5-42 ......................................................28
    GWP 5-58 ......................................................28
    GWP 5-63 ......................................................28
    GWP 5/45 ......................................................28
    GWP 6 ...........................................................28
    GWP 6-12 ......................................................28
    GWP 6-15 ......................................................28
    GWP 6-20 ......................................................28
    GWP 6-25 ......................................................28
    GWP 6-30 ......................................................28
    GWP 6-40 ......................................................28
    GWP 6-50 ......................................................28
    GWP 6-52 ......................................................28
    GWP 6-60 ......................................................28
    GWP 6-92 ......................................................28
    H04-00-10 ...................................................101
    H04-01S-10 .................................................101
    H04-06-10 ...................................................101
    H04-M3-10 ..................................................101
    H04-M5-10 ..................................................101
    H06-00-10 ...................................................101
    H06-01S-10 .................................................101
    H06-02S-10 .................................................101
    H06-08-10 ...................................................101
    H06-M5-10 ..................................................101
    H08-00-10 ...................................................101
    H08-01S-10 .................................................101
    H08-02S-10 .................................................101
    HA-01J-10 ...................................................112
    HA-01J-15 ...................................................112
    HA-01J-20 ...................................................112
    HA-01J-25 ...................................................112
    HA-01J-30 ...................................................112
    HA-02J-10 ...................................................112
    HA-02J-15 ...................................................112
    HA-02J-20 ...................................................112
    HA-02J-25 ...................................................112
    HA-02J-30 ...................................................112
    HO4-02S-10 ................................................101
    HP-06 ..........................................................111
    HP-06R ........................................................111
    HP-08 ..........................................................111
    HP-08R ........................................................111
    HP-10 ..........................................................111
    HP-10R ........................................................111
    HP-15 ..........................................................111
    HP-15R ........................................................111
    HP-20 ..........................................................111
    HP-20R ........................................................111
    HP-30 ..........................................................111
    HP-30B (NBR) ...............................................111
    HP-30R ........................................................111
    HP-40 ..........................................................111
    HP-40R ........................................................111
    HX-40 ............................................................27
    HX-60 ............................................................27
    HX-60 HD ......................................................27
    IDG 16-26-32.................................................66
    IDG 16-32-38.................................................66
    IRK 4 ..............................................................91
    IRK 4-TP ........................................................91
    ISC 8-10 ........................................................69
    ISC 8-20 ........................................................69
    ISC 8-30 ........................................................69
    ISC 8-40 ........................................................69
    ISC 8-50 ........................................................69
    ISC MPS-1-1 ..................................................69
    ISC MPS-1-2 ..................................................69
    ISC MPS-1-3 ..................................................69
    ISC MPS-1-4 ..................................................69
    JX-40/40 .......................................................27
    JX-80/40 .......................................................27
    KAC 14-14 .....................................................36
    KAC 20-20 .....................................................36
    KAC 30-30 .....................................................36
    KBV 10-18 L ..................................................30
    KBV 18-18 L ..................................................30
    KBV 25-25 X ..................................................30
    KBV 25-50 X ..................................................30
    KBV 40-40 JX.................................................30
    KBV 40-80 JX.................................................30
    KBV 50-25 X ..................................................30
    KBV 80-40 JX.................................................30
    KEC 14-14 .....................................................37
    KEC 14-20 .....................................................37
    KEC 20-20 .....................................................37
    KEC 20-30 .....................................................37
    KEC 30-30 .....................................................37
    KHZ 12-10-D .................................................54
    KHZ 12-10-D-A ..............................................54
    KHZ 12-10-E ..................................................54
    KHZ 12-5-D ...................................................54
    KHZ 12-5-D-A ................................................54
    KHZ 12-5-E ....................................................54
    KHZ 20-10-D .................................................54
    KHZ 20-10-D-A ..............................................54
    KHZ 20-10-E ..................................................54
    KHZ 20-20-D .................................................54
    KHZ 20-20-D-A ..............................................54
    KHZ 20-30-D .................................................54
    KHZ 20-30-D-A ..............................................54
    KHZ 20-5-D ...................................................54
    KHZ 20-5-D-A ................................................54
    KHZ 20-5-E ...................................................54
    KHZ 32-10-D .................................................54
    KHZ 32-10-D-A ..............................................54
    KHZ 32-10-E ..................................................54
    KHZ 32-20-D .................................................54
    KHZ 32-20-D-A ..............................................54
    KHZ 32-20-E ..................................................54
    KHZ 32-30-D .................................................54
    PARTS InDEX
    + sas-automation.com | 129
    KHZ 32-30-D-A ..............................................54
    KHZ 32-5-D ...................................................54
    KHZ 32-5-D-A ................................................54
    KHZ 32-5-E ....................................................54
    KIC 14-14 ......................................................37
    KIC 14-20 ......................................................37
    KIC 20-20 ......................................................37
    KIC 20-30 ......................................................37
    KIC 30-30 ......................................................37
    KK 1...............................................................98
    KK 2...............................................................98
    KMC-10 .......................................................113
    KMC-15 .......................................................113
    KMC-20 .......................................................113
    KMC-30 .......................................................113
    KNC 10 ..........................................................36
    KNC 14 ..........................................................36
    KNC 20 ..........................................................36
    KNC 30 .........................................................36
    KPC 10 ..........................................................36
    KPC 14 ..........................................................36
    KPC 20 ..........................................................36
    KPC 30 ..........................................................36
    KPL 18-18 L ...................................................30
    KPL 25-25 X ..................................................30
    KPL 25-50 X ..................................................30
    KPL 40-40 JX .................................................30
    KPL 50-50 X ..................................................30
    KPL 80-40 JX .................................................30
    KPL 80-80 JX .................................................30
    KV-JX .............................................................35
    KV-L...............................................................35
    KV-X ..............................................................35
    KVB 10...........................................................38
    KVB 14...........................................................38
    KVB 20...........................................................38
    KVB 30...........................................................38
    L-18/10 .........................................................27
    L-18/18 .........................................................27
    L04-00-10 ...................................................101
    L04-01S-10 .................................................101
    L04-02S-10 .................................................101
    L04-M3-10 ..................................................101
    L04-M5-10 ..................................................101
    L06-00-10 ...................................................101
    L06-01S-10 .................................................101
    L06-02S-10 .................................................101
    L06-M5-10 ..................................................101
    L08-00-10 ...................................................101
    L08-01S-10 .................................................101
    L08-02S-10 .................................................101
    LB-0640-M5 ................................................106
    LB-0640-M5 ................................................114
    LB-FM5-M5 .................................................106
    LB-FM5-M5 .................................................114
    LC-0425-M5 ................................................106
    LC-0425-M5 ................................................114
    LC-0640-M5 ................................................106
    LC-0640-M5 ................................................114
    LE-FM5 ........................................................106
    LE-FM5 ........................................................114
    LES-5.............................................................91
    LES-5P...........................................................91
    LH-0425-M5 ................................................106
    LH-0425-M5 ................................................114
    LH-0640-M5 ................................................106
    LH-0640-M5 ................................................114
    LH-FM5-M5 .................................................106
    LH-FM5-M5 .................................................114
    LIA 380-1.......................................................73
    LL-FM5 ........................................................106
    LL-FM5 ........................................................114
    LN-M5-M5 ...................................................106
    LN-M5-M5 ...................................................114
    LP-M5..........................................................106
    LP-M5..........................................................114
    LPG 10-10 .....................................................72
    LPG 10-25 .....................................................72
    LPG 10-30 .....................................................72
    LPG RPL-1 .....................................................72
    LPG RPL-2 .....................................................72
    LPG RPW-375-1 .............................................72
    LPG RPW-375-2 .............................................72
    LRS-18P ........................................................91
    LVT 1/4 X .......................................................99
    LVT 1/8 X .......................................................99
    LVT M5 ..........................................................99
    MA-01 .........................................................114
    MA-01S .......................................................114
    MA-02 .........................................................114
    MA-03 .........................................................114
    MA-04 .........................................................114
    MA-05 .........................................................114
    MA-06 .........................................................114
    MA-07 .........................................................114
    MA-08 .........................................................114
    MA-09 .........................................................114
    MA-10 .........................................................114
    MA-11 .........................................................114
    MA-12 .........................................................114
    MA-13 .........................................................114
    ME 10 ............................................................75
    ME 20 ............................................................75
    ME 3 ..............................................................75
    ME 30 ............................................................75
    ME 5 ..............................................................75
    ME-HP 20/30 .................................................84
    ME-HP 3/5/10 ................................................84
    MER-10 .........................................................78
    MER-20 .........................................................78
    MER-3 ...........................................................78
    MER-30 .........................................................78
    MER-5 ...........................................................78
    MG-10 ...........................................................78
    MG-20 ...........................................................78
    MG-3 .............................................................78
    ML-10............................................................76
    ML-20............................................................76
    ML-30............................................................76
    MR10M ..........................................................75
    MR10 .............................................................75
    MR20M ..........................................................75
    MR20 .............................................................75
    MR30AM ........................................................75
    MR30A...........................................................75
    MR35A...........................................................75
    MR3M ............................................................75
    MR50AM ........................................................75
    MR50FM ........................................................75
    MR5M ............................................................75
    MR7M ............................................................75
    MR-AH 20 ......................................................83
    MR-AH 30 ......................................................83
    MR-AH 50 ......................................................83
    MR-KS 10 ......................................................83
    MR-KS 20 ......................................................83
    MR-KS 30 ......................................................83
    MR-KS 50 ......................................................83
    MR-SH 20 ......................................................83
    MS-10 ...........................................................80
    MS-20 ...........................................................80
    MS-3 .............................................................80
    MS-30 ...........................................................80
    MS-5 .............................................................80
    MSF-10..........................................................81
    MSF-20..........................................................81
    MSF-30..........................................................81
    MSFP-10........................................................81
    MSFP-20........................................................81
    MSFP-30........................................................81
    MSK-10 .........................................................81
    MSK-20 .........................................................81
    MSK-30 .........................................................81
    MSP-20 .........................................................80
    MSP-30 .........................................................80
    MTL-10 ..........................................................62
    OEM-0.25M .................................................114
    OEM-0.5M ...................................................114
    P-04-10 .......................................................103
    P-06-10 .......................................................103
    P-08-10 .......................................................103
    PC4-01M .....................................................104
    PC4-M5M ....................................................104
    PC6-01M .....................................................104
    PC6-M5M ....................................................104
    PGR 1-R .........................................................71
    PGR 10-R .......................................................71
    PGR 10-S .......................................................71
    PGR 16-S .......................................................71
    PGR 25 ..........................................................70
    PGR 32 ..........................................................70
    PGR 40 ..........................................................70
    PGR 5-R .........................................................71
    PJ-JX ............................................................35
    PJ-X...............................................................35
    PJB 4 .............................................................95
    PJB 8 .............................................................95
    PL4-01M......................................................104
    PL4-M5M .....................................................104
    PL6-01M......................................................104
    PL6-M5M .....................................................104
    PRO 15 ........................................................114
    PRO 25 ........................................................114
    PRO 50 ........................................................114
    PU4M ...........................................................104
    PU6M ...........................................................104
    QCC 0 ............................................................24
    QCC 1 ...........................................................24
    QCC 2 ............................................................24
    QCC 3 ............................................................24
    QCI 30 T .........................................................25
    QCI 75/50 D ..................................................25
    QCT 0 ............................................................24
    QCT 1 ............................................................24
    QCT 2 ............................................................24
    QCT 3 ...........................................................24
    QMP 1-90 ......................................................24
    QMP 2-150-160 .............................................24
    QMP 2-90 ......................................................24
    QMP 3-150-160 .............................................24
    QSR 150-10 ...................................................22
    QSR 160-18 ...................................................22
    QSR 90-8 .......................................................22
    QST 150-10 ...................................................23
    PARTS InDEX
    InDeX
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    QST 160-18 ...................................................23
    QST 90-8 .......................................................23
    R31-100-0000 ...............................................59
    R31-100-B000 ...............................................59
    R31-100-C000...............................................59
    R31-200-0000 ...............................................59
    R31-200-B000 ...............................................59
    R31-200-C000...............................................59
    RC 10-S .........................................................69
    RC 12.7-RR ....................................................70
    RC 19.1-RR ....................................................70
    RC 20-S .........................................................69
    RC 25.4-RR ....................................................70
    RC 30-S .........................................................69
    RC 31.8-RR ....................................................70
    RC 50-S .........................................................69
    RPL 2 .............................................................98
    RPL 4 .............................................................98
    RPL 6 .............................................................98
    RPL 8 .............................................................98
    RRK-93 ..........................................................91
    RRK-93-TP .....................................................91
    RRK-M9P .......................................................91
    RRK-M9P-TP ..................................................91
    RRK-OHSP-006 ..............................................91
    RRK-OISP-014................................................91
    RRK-OISP-015................................................91
    RRK-OISP-019................................................91
    RRK-TL-W1R5MB1 .........................................91
    RRK-TL-W1R5MC1 .........................................91
    RRK-TL-W3MB1 .............................................91
    RRK-Y47P-TP .................................................91
    RRK-Y59B ......................................................91
    RRK-Y59B-TP .................................................91
    RRK-Y7P ........................................................91
    RSM 1-150 ....................................................26
    RSM 1-75 ......................................................26
    RSM 2-150 ....................................................26
    RSM 2-250 ....................................................26
    RSM 3-150 ....................................................26
    RSM 3-250 ...................................................26
    RVA 20-30 .....................................................48
    RVA 20-60 .....................................................48
    RVA 30-50 .....................................................48
    RVB 1-1 U22 ..................................................97
    RVB 1-2 U22 ..................................................97
    RVB 2-1 U22 ..................................................97
    RVB 2-2 U22 ..................................................97
    RVB 2-2 U42 ..................................................97
    RVB 3-2 U42 ..................................................97
    RVB 4-2 U42 ..................................................97
    RVB A1...........................................................97
    RVB V1 ...........................................................97
    RVC4-01 ........................................................59
    RVC4-M5 .......................................................59
    RVC6-01 ........................................................59
    RVC6-M5 .......................................................59
    RVUM 4-4 ......................................................59
    RVUM 6-4 ......................................................59
    RVUM 6-6 ......................................................59
    S04-01S-10 .................................................102
    S04-M5-10 ..................................................102
    S06-01S-10 .................................................102
    S06-02S-10 .................................................102
    S06-M5-10 ..................................................102
    S08-01S-10 .................................................102
    S08-02S-10 .................................................102
    SA-01L-10-5................................................111
    SA-01L-12-10..............................................111
    SA-02L-10-5................................................111
    SA-02L-12-10..............................................111
    SA-02L-12-30..............................................111
    SA-02L-12-5................................................111
    SA-03L-16 ...................................................111
    SA-04L-16 ...................................................111
    SA-08E ........................................................111
    SA-08G ........................................................110
    SA-09E ........................................................111
    SA-09G ........................................................110
    SA-13E ........................................................111
    SA-13G ........................................................110
    SA-15E ........................................................111
    SA-15G ........................................................110
    SA-20E ........................................................111
    SA-20G ........................................................110
    SA-30E ........................................................111
    SA-30G ........................................................110
    SA-40E ........................................................111
    SA-40G ........................................................110
    SAB-02L-12-5 .............................................111
    SAE-02L-12-5 ..............................................111
    SAF-02L-12-5 ..............................................111
    SAS 1/4 .........................................................42
    SAS 1/4 .......................................................100
    SAS 1/8 .........................................................42
    SAS 1/8 .......................................................100
    SC-10 ............................................................80
    SC-20 ............................................................80
    SC-30 ............................................................80
    SEC 40/40 JX .................................................29
    SEC 50/38 D ..................................................29
    SEC 80/40 JX .................................................29
    SEO-10 ..........................................................92
    SEO-5 ............................................................92
    SKS 20...........................................................38
    SKS 20-30 .....................................................38
    SLL 10-15 ......................................................66
    SLL 16-30 ......................................................66
    SN 1.5 ...........................................................91
    SN 1.5 ...........................................................91
    SN 1.5-P ........................................................91
    SN 1.5-P ........................................................91
    SN-10 ............................................................77
    SN-20 ............................................................77
    SN-3 ..............................................................77
    SN-5 ..............................................................77
    SNP-10 ..........................................................77
    SNP-20 ..........................................................77
    SNP-3 ............................................................77
    SNP-5 ............................................................77
    SP 1.5 PM1.2 .................................................91
    SP-06 ..........................................................110
    SP-06R ........................................................110
    SP-08 ..........................................................110
    SP-08R ........................................................110
    SP-09 ..........................................................110
    SP-09R ........................................................110
    SP-13 ..........................................................110
    SP-13R ........................................................110
    SP-13S ........................................................110
    SP-13SR ......................................................110
    SP-15 ..........................................................110
    SP-15R ........................................................110
    SP-20 ..........................................................110
    SP-20R ........................................................110
    SP-20S ........................................................110
    SP-20SR ......................................................110
    SP-30 ..........................................................110
    SP-30R ........................................................110
    SP-30S ........................................................110
    SP-30SR ......................................................110
    SP-40 ..........................................................110
    SP-40R ........................................................110
    SP-60SR ......................................................110
    SP-80S ........................................................110
    SPBE-08R ....................................................110
    SPBE-10R ....................................................110
    SPBE-12R ....................................................110
    SPBE-20R ....................................................110
    SPBS-21 ......................................................110
    SPU 3-250 ....................................................73
    STB M5 ..........................................................35
    STB M6 ..........................................................35
    SV-X ..............................................................35
    SWM 0 ...........................................................18
    SWM 0 LT ......................................................18
    SWM 0.1 ........................................................18
    SWM 0.1 LT ...................................................18
    SWM 0E .........................................................18
    SWM 1 ...........................................................18
    SWM 1 - Steel ...............................................18
    SWM 1 LT ......................................................18
    SWM 1 SA ......................................................20
    SWM 1E .........................................................18
    SWM 2 ...........................................................18
    SWM 2 - Steel ...............................................18
    SWM 2 LT ......................................................18
    SWM 2 SA ......................................................20
    SWM 2E .........................................................18
    SWM 3 ...........................................................18
    SWM 3 - Steel ...............................................18
    SWM 3 SA .....................................................20
    SWM 3E .........................................................18
    SZD 12-10 .....................................................56
    SZD 12-10-A..................................................56
    SZD 12-20 .....................................................56
    SZD 12-20-A..................................................56
    SZD 20-10 .....................................................56
    SZD 20-10-A..................................................56
    SZD 20-20 .....................................................56
    SZD 20-20-A..................................................56
    SZD 20-30 .....................................................56
    SZD 20-30-A..................................................56
    SZD 20-40 .....................................................56
    SZD 20-40-A..................................................56
    SZD 20-50 .....................................................56
    SZD 20-50-A..................................................56
    SZD 32-10 .....................................................56
    SZD 32-10-A..................................................56
    SZD 32-20 .....................................................56
    SZD 32-20-A..................................................56
    SZD 32-30 .....................................................56
    SZD 32-30-A..................................................56
    SZD 32-40 ....................................................56
    SZD 32-40-A..................................................56
    SZD 32-50 .....................................................56
    SZD 32-50-A..................................................56
    SZS 12-10-14 ................................................56
    SZS 12-10-14 A .............................................56
    SZS 12-20-14 ................................................56
    SZS 12-20-14 A .............................................56
    SZS 20-10-20 ................................................56
    SZS 20-10-20 A .............................................56
    SZS 20-20-20 ................................................56
    PARTS InDEX
    + sas-automation.com | 131
    SZS 20-20-20 A .............................................56
    SZS 20-30-20 ................................................56
    SZS 20-30-20 A .............................................56
    SZS 20-40-20 ................................................56
    SZS 20-40-20 A .............................................56
    SZS 20-50-20 ...............................................56
    SZS 20-50-20 A .............................................56
    SZS 32-10-30 ................................................56
    SZS 32-10-30 A .............................................56
    SZS 32-20-30 ...............................................56
    SZS 32-20-30 A .............................................56
    SZS 32-30-30 ................................................56
    SZS 32-30-30 A .............................................56
    SZS 32-40-30 ...............................................56
    SZS 32-40-30 A .............................................56
    SZS 32-50-30 ................................................56
    SZS 32-50-30 A .............................................56
    T-14/11 .........................................................28
    T-20/10 .........................................................28
    T-20/16 .........................................................28
    T-30/20 .........................................................28
    T-30/25 .........................................................28
    T04-00-10 ...................................................102
    T04-01S-10 .................................................102
    T04-06-10 ...................................................102
    T04-M5-10 ..................................................102
    T06-00-10 ...................................................102
    T06-01S-10 .................................................102
    T06-02S-10 .................................................102
    T06-08-10 ...................................................102
    T06-M5-10 ..................................................102
    T08-00-10 ...................................................102
    T08-01S-10 .................................................102
    T08-02S-10 .................................................102
    TAD 0 .............................................................24
    TAD 1 .............................................................24
    TAD 2 .............................................................24
    TAD 3 .............................................................24
    TC-21 ..........................................................108
    TCN 63 ..........................................................82
    TCS-0 ............................................................25
    TCS-1 ............................................................25
    TCS-2 ............................................................25
    TCS-3 ............................................................25
    TCS-4 ............................................................25
    TFP-14...........................................................93
    TFP-3.............................................................93
    TFP-5.............................................................93
    TFP-8.............................................................93
    TFR-10 ..........................................................93
    TFR-3 ............................................................93
    TFR-5 ............................................................93
    TFR-8 ............................................................93
    TK-21 ..........................................................114
    TMP-14 .........................................................93
    TMP-3 ...........................................................93
    TMP-5 ...........................................................93
    TMP-8 ...........................................................93
    TMR-10 .........................................................93
    TMR-3 ...........................................................93
    TMR-5 ...........................................................93
    TMR-8 ...........................................................93
    TU-01 ............................................................84
    VAF 20 Pu ......................................................53
    VAF 30 Pu ......................................................53
    VAF 55 Pu C*..................................................53
    VAS 15 Pu ......................................................53
    VAS 20 Pu ......................................................53
    VAS 30 Pu ......................................................53
    VAS 30 Pu/H (Curved Surface) ........................53
    VAS 50 Pu ......................................................53
    VAS 50 Pu/H (Curved Surface) ........................53
    VAS 70 SBR* .................................................53
    VAS 80 Pu .....................................................53
    VBH 10-66P ...................................................58
    VBH 10-66S ...................................................58
    VC 1-110-N2 .................................................49
    VC 1-110-S2 .................................................49
    VC 1-15-C5....................................................49
    VC 1-15-S5 ....................................................49
    VC 1-20-C8....................................................49
    VC 1-20-S8 ....................................................49
    VC 1-25-C8....................................................49
    VC 1-25-S8 ....................................................49
    VC 1-30-C8....................................................49
    VC 1-30-S8 ....................................................49
    VC 1-40-N4 ...................................................49
    VC 1-40-S4 ....................................................49
    VC 1-50-N4 ...................................................49
    VC 1-50-S4 ....................................................49
    VC 1-75-N4 ...................................................49
    VC 1-75-S4 ....................................................49
    VC 2-10-C5....................................................50
    VC 2-10-S5 ....................................................50
    VC 2-110-N2 .................................................50
    VC 2-110-S2 ..................................................50
    VC 2-15-C5....................................................50
    VC 2-15-S5 ....................................................50
    VC 2-20-C8....................................................50
    VC 2-20-S8 ....................................................50
    VC 2-30-C4 ...................................................50
    VC 2-30-S8 ....................................................50
    VC 2-40-C4....................................................50
    VC 2-40-S4 ....................................................50
    VC 2-50-N4 ...................................................50
    VC 2-50-S4 ....................................................50
    VC 2-75-N4 ...................................................50
    VC 2-75-S4 ....................................................50
    VC 3-10-DDP5 ...............................................50
    VC 3-110-DDP3 .............................................50
    VC 3-15-DDP5 ...............................................50
    VC 3-20-DDP8 ...............................................50
    VC 3-25-DDP8 ...............................................50
    VC 3-35-DDP4 ...............................................50
    VC 3-52-DDP4 ...............................................50
    VC 3-75-DDP3 ...............................................50
    VCF 1-100-P3 ................................................53
    VCF 1-125-P3 ................................................53
    VCF 1-35-P3 ..................................................53
    VCF 1-50-P3 ..................................................53
    VCF 1-75-P3 ..................................................53
    VCF 2-110-P3 ................................................53
    VCF 2-40-P3 ..................................................53
    VCF 2-60-P3 ..................................................53
    VCF 2-80-P3 ..................................................53
    VCN 1-15-C ...................................................49
    VCN 1-15-S ...................................................49
    VCN 1-20-C ...................................................49
    VCN 1-20-S ...................................................49
    VCN 1-25-C ...................................................49
    VCN 1-25-S ...................................................49
    VCN 1-30-C ...................................................49
    VCN 1-30-S ...................................................49
    VCN 1-40-N ...................................................49
    VCN 1-40-S ...................................................49
    VCN 1-50-N ...................................................49
    VCN 1-50-S ...................................................49
    VCN 1-75-N ...................................................49
    VCN 1-75-S ...................................................49
    VCN 1-110-N .................................................49
    VCN 1-110-S .................................................49
    VCN 2-10-C ...................................................50
    VCN 2-10-S ...................................................50
    VCN 2-15-C ...................................................50
    VCN 2-15-S ...................................................50
    VCN 2-20-C ...................................................50
    VCN 2-20-S ...................................................50
    VCN 2-30-C ...................................................50
    VCN 2-30-S ...................................................50
    VCN 2-40-C ...................................................50
    VCN 2-40-S ...................................................50
    VCN 2-50-N ...................................................50
    VCN 2-50-S ...................................................50
    VCN 2-75-N ...................................................50
    VCN 2-75-S ...................................................50
    VCN 2-110-N .................................................50
    VCN 2-110-S .................................................50
    VCN 3-10-DDP ...............................................50
    VCN 3-15-DDP ...............................................50
    VCN 3-20-DDP ...............................................50
    VCN 3-25-DDP ...............................................50
    VCN 3-35-DDP ...............................................50
    VCN 3-52-DDP ...............................................50
    VCN 3-110-DDP .............................................50
    VCV 1/4 .........................................................58
    VCV 1/8 .........................................................58
    VG-30 ...........................................................59
    VGI 1-6-6 SI ...................................................58
    VGI 1-6-6 XI ...................................................58
    VGI 2-6-6 SI ...................................................58
    VGI 2-6-6 XI ...................................................58
    VGI 2-8-8 SI ...................................................58
    VGI 2-8-8 XI ...................................................58
    VGI 3-8-12 SI .................................................58
    VGI 3-8-12 XI ................................................58
    VLR 10-90 .....................................................64
    VLR 10-90 .....................................................73
    VLR 10-90 .....................................................85
    VLR 14-120 ...................................................64
    VLR 14-120 ...................................................73
    VLR 14-120 ...................................................85
    VLR 20-150 ...................................................64
    VLR 20-150 ...................................................73
    VLR 20-150 ...................................................85
    VLR 30-200 ...................................................64
    VLR 30-200 ...................................................73
    VLR 30-200 ...................................................85
    VN 0-2 x 4 N ..................................................51
    VN 0-2 x 4 S ..................................................51
    VN 0-3.5 x 7 N ...............................................51
    VN 0-3.5 x 7 S ...............................................51
    VN 0-5 x 15 N ................................................51
    VN 0-5 x 15 S ................................................51
    VN 0-6 x 18 N ................................................51
    VN 0-6 x 18 S ................................................51
    VN 0-8 x 24 N ................................................51
    VN 0-8 x 24 S ................................................51
    VN 0-10 x 30 N ..............................................51
    VN 0-10 x 30 S ..............................................51
    VN 0-15 x 45 N ..............................................51
    VN 0-15 x 45 S ..............................................51
    VN 0-20 x 60 N ..............................................51
    VN 0-20 x 60 S ..............................................51
    VN 0-25 x 75 N ..............................................51
    PARTS InDEX
    InDeX
    *SAS Automation will match any competitor’s price for stock components with proper verification.
    VN 0-25 x 75 S ..............................................51
    VN 0-30 x 90 N ..............................................51
    VN 0-30 x 90 S ..............................................51
    VN 1-2-N .......................................................51
    VN 1-2-P ........................................................51
    VN 1-2-S ........................................................51
    VN 1-3.5-N ....................................................51
    VN 1-3.5-P .....................................................51
    VN 1-3.5-S .....................................................51
    VN 1-5-N .......................................................51
    VN 1-5-P ........................................................51
    VN 1-5-S ........................................................51
    VN 1-8-N .......................................................51
    VN 1-8-P ........................................................51
    VN 1-8-S ........................................................51
    VN 1-8-V ........................................................51
    VN 1-10-N .....................................................51
    VN 1-10-P ......................................................51
    VN 1-10-S ......................................................51
    VN 1-10-V ......................................................51
    VN 1-15-N .....................................................51
    VN 1-15-P ......................................................51
    VN 1-15-S ......................................................51
    VN 1-20-N .....................................................51
    VN 1-20-P ......................................................51
    VN 1-20-S ......................................................51
    VN 1-20-V ......................................................51
    VN 1-25-N .....................................................51
    VN 1-25-P ......................................................51
    VN 1-25-S ......................................................51
    VN 1-25-V ......................................................51
    VN 1-30-N .....................................................51
    VN 1-30-P ......................................................51
    VN 1-30-S ......................................................51
    VN 1-30-V ......................................................51
    VN 1-40-N .....................................................51
    VN 1-40-P ......................................................51
    VN 1-40-S ......................................................51
    VN 1-40-V ......................................................51
    VN 1-50-N .....................................................51
    VN 1-50-P ......................................................51
    VN 1-50-S ......................................................51
    VN 1-50-V ......................................................51
    VN 1-60-N .....................................................51
    VN 1-60-P ......................................................51
    VN 1-60-S ......................................................51
    VN 1-80-N .....................................................51
    VN 1-80-P ......................................................51
    VN 1-80-S ......................................................51
    VN 1-95-N .....................................................51
    VN 1-95-P ......................................................51
    VN 1-95-S ......................................................51
    VN 2-10-N .....................................................52
    VN 2-10-P ......................................................52
    VN 2-10-S ......................................................52
    VN 2-15-N .....................................................52
    VN 2-15-P ......................................................52
    VN 2-15-S ......................................................52
    VN 2-20-N .....................................................52
    VN 2-20-P ......................................................52
    VN 2-20-S ......................................................52
    VN 2-30-N .....................................................52
    VN 2-30-P ......................................................52
    VN 2-30-S ......................................................52
    VN 2-40-N .....................................................52
    VN 2-40-P ......................................................52
    VN 2-40-S ......................................................52
    VN 2-50-N .....................................................52
    VN 2-50-P ......................................................52
    VN 2-50-S ......................................................52
    VN 2-75-N .....................................................52
    VN 2-75-P ......................................................52
    VN 2-75-S ......................................................52
    VN 3-5-N .......................................................52
    VN 3-5-P ........................................................52
    VN 3-5-S ........................................................52
    VN 3-8-N .......................................................52
    VN 3-8-P ........................................................52
    VN 3-8-S ........................................................52
    VN 3-10-N .....................................................52
    VN 3-10-P ......................................................52
    VN 3-10-S ......................................................52
    VN 3-15-N .....................................................52
    VN 3-15-P ......................................................52
    VN 3-15-S ......................................................52
    VN 3-18-N .....................................................52
    VN 3-18-P ......................................................52
    VN 3-18-S ......................................................52
    VN 3-20-N .....................................................52
    VN 3-20-P ......................................................52
    VN 3-20-S ......................................................52
    VN 3-30-N .....................................................52
    VN 3-30-P ......................................................52
    VN 3-30-S ......................................................52
    VN 3-40-N .....................................................52
    VN 3-40-P ......................................................52
    VN 3-40-S ......................................................52
    VN 3-60-N .....................................................52
    VN 3-60-P ......................................................52
    VN 3-60-S ......................................................52
    VN 3-90-N .....................................................52
    VN 3-90-P ......................................................52
    VN 3-90-S ......................................................52
    VPI 1-2-1/4 ....................................................99
    VPI 1-2-3/8 ....................................................99
    VPI 1-4-1/4 ....................................................99
    VPI 1-4-3/8 ....................................................99
    VPI 1-6-1/4 ....................................................99
    VPI 1-6-3/8 ....................................................99
    VPI 1-8-1/4 ....................................................99
    VPI 1-8-3/8 ....................................................99
    VS 0-10 x 30 N ..............................................51
    VS 0-10 x 30 S ...............................................51
    VS 0-15 x 45 N ..............................................51
    VS 0-15 x 45 S ...............................................51
    VS 0-2 x 4 N ..................................................51
    VS 0-2 x 4 S ...................................................51
    VS 0-20 x 60 N ..............................................51
    VS 0-20 x 60 S ...............................................51
    VS 0-25 x 75 N .............................................51
    VS 0-25 x 75 S ...............................................51
    VS 0-3.5 x 7 N ...............................................51
    VS 0-3.5 x 7 S ................................................51
    VS 0-30 x 90 N ..............................................51
    VS 0-30 x 90 S ..............................................51
    VS 0-5 x 15 N ................................................51
    VS 0-5 x 15 S .................................................51
    VS 0-6 x 18 N ................................................51
    VS 0-6 x 18 S .................................................51
    VS 0-8 x 24 N ................................................51
    VS 0-8 x 24 S .................................................51
    VS 1-10-N5 ....................................................51
    VS 1-10-P5 ....................................................51
    VS 1-10-S5 ....................................................51
    VS 1-10-V5 ....................................................51
    VS 1-15-N5 ....................................................51
    VS 1-15-P5 ....................................................51
    VS 1-15-S5 ....................................................51
    VS 1-2-N5 ......................................................51
    VS 1-2-P5 ......................................................51
    VS 1-2-S5 ......................................................51
    VS 1-20-N8 ....................................................51
    VS 1-20-P8 ....................................................51
    VS 1-20-S8 ....................................................51
    VS 1-20-V8 ....................................................51
    VS 1-25-N8 ....................................................51
    VS 1-25-P8 ....................................................51
    VS 1-25-S8 ....................................................51
    VS 1-25-V8 ....................................................51
    VS 1-3.5-N5 ...................................................51
    VS 1-3.5-P5 ...................................................51
    VS 1-3.5-S5 ...................................................51
    VS 1-30-N8 ....................................................51
    VS 1-30-P8 ....................................................51
    VS 1-30-S8 ....................................................51
    VS 1-30-V8 ....................................................51
    VS 1-40-N8 ....................................................51
    VS 1-40-P8 ....................................................51
    VS 1-40-S8 ....................................................51
    VS 1-40-V8 ....................................................51
    VS 1-5-N5 ......................................................51
    VS 1-5-P5 ......................................................51
    VS 1-5-S5 ......................................................51
    VS 1-50-N8 ....................................................51
    VS 1-50-P8 ....................................................51
    VS 1-50-S8 ....................................................51
    VS 1-50-V8 ....................................................51
    VS 1-60-N4 ....................................................51
    VS 1-60-P4 ....................................................51
    VS 1-60-S4 ....................................................51
    VS 1-8-N5 ......................................................51
    VS 1-8-P5 ......................................................51
    VS 1-8-S5 ......................................................51
    VS 1-8-V5 ......................................................51
    VS 1-80-N4 ....................................................51
    VS 1-80-P4 ....................................................51
    VS 1-95-N4 ....................................................51
    VS 1-95-P4 ....................................................51
    VS 1-95-S4 ....................................................51
    VS 2-10-N5 ....................................................52
    VS 2-10-P5 ....................................................52
    VS 2-10-S5 ....................................................52
    VS 2-15-N5 ....................................................52
    VS 2-15-P5 ....................................................52
    VS 2-15-S5 ....................................................52
    VS 2-20-N8 ....................................................52
    VS 2-20-P8 ....................................................52
    VS 2-20-S8 ....................................................52
    VS 2-30-N8 ....................................................52
    VS 2-30-P8 ....................................................52
    VS 2-30-S8 ....................................................52
    VS 2-40-N8 ....................................................52
    VS 2-40-P8 ....................................................52
    VS 2-40-S8 ....................................................52
    VS 2-50-N8 ....................................................52
    VS 2-50-P8 ....................................................52
    VS 2-50-S8 ....................................................52
    VS 2-75-N4 ....................................................52
    VS 2-75-P4 ....................................................52
    VS 2-75-S4 ....................................................52
    VS 3-10-N5 ....................................................52
    VS 3-10-N8 ....................................................52
    VS 3-10-P5 ....................................................52
    VS 3-10-P8 ....................................................52
    PARTS InDEX
    + sas-automation.com | 133
    VS 3-10-S5 ....................................................52
    VS 3-10-S8 ....................................................52
    VS 3-15-N5 ....................................................52
    VS 3-15-N8 ....................................................52
    VS 3-15-P5 ....................................................52
    VS 3-15-P8 ....................................................52
    VS 3-15-S5 ....................................................52
    VS 3-15-S8 ....................................................52
    VS 3-18-N5 ....................................................52
    VS 3-18-N8 ....................................................52
    VS 3-18-P5 ....................................................52
    VS 3-18-P8 ....................................................52
    VS 3-18-S5 ....................................................52
    VS 3-18-S8 ....................................................52
    VS 3-20-N5 ....................................................52
    VS 3-20-N8 ....................................................52
    VS 3-20-P5 ....................................................52
    VS 3-20-P8 ....................................................52
    VS 3-20-S5 ....................................................52
    VS 3-20-S8 ....................................................52
    VS 3-30-N8 ....................................................52
    VS 3-30-P8 ....................................................52
    VS 3-30-S8 ....................................................52
    VS 3-40-N8 ....................................................52
    VS 3-40-P8 ....................................................52
    VS 3-40-S8 ....................................................52
    VS 3-5-N5 ......................................................52
    VS 3-5-P5 ......................................................52
    VS 3-5-S5 ......................................................52
    VS 3-60-N8 ....................................................52
    VS 3-60-P8 ....................................................52
    VS 3-60-S8 ....................................................52
    VS 3-8-N5 ......................................................52
    VS 3-8-P5 ......................................................52
    VS 3-8-S5 ......................................................52
    VS 3-90-N4 ....................................................52
    VS 3-90-S4 ....................................................52
    VSA 10...........................................................51
    VSA 100.........................................................51
    VSA 110.........................................................51
    VSA 130.........................................................51
    VSA 15...........................................................51
    VSA 20...........................................................51
    VSA 30...........................................................51
    VSA 40...........................................................51
    VSA 5.............................................................51
    VSA 50...........................................................51
    VSA 70...........................................................51
    VSA 80...........................................................51
    VSA 90...........................................................51
    VTB 1/4 JX .....................................................99
    VTB 1/4 X .......................................................99
    VTB 2-1-1/4 JX ..............................................99
    VTB 2-1-1/4 X ................................................99
    VTB 2-2-1/4 JX ..............................................99
    VTB 2-2-1/4 X ................................................99
    VTB M5 L .......................................................99
    WF-1540 .......................................................85
    WF-620 .........................................................85
    WIV 25 X ........................................................30
    WIV 40 JX ......................................................30
    WIV 50 X ........................................................30
    WIV 80 JX .....................................................30
    WKA 10-90 ....................................................43
    WKA 14-120 ..................................................43
    WKA 20-150 ..................................................43
    WKA 30-200 .................................................43
    WLS 1/4 .........................................................41
    WLS 1/8 .........................................................41
    WLS M5 .........................................................41
    WSA 10 .........................................................40
    WSA 14 .........................................................40
    WSA 20 .........................................................40
    WSA 30 .........................................................40
    WSD 1/4 ........................................................42
    WSD 1/8 ........................................................42
    WSD M5 ........................................................42
    WSF 10.5 .......................................................42
    WSF 12.5 .......................................................42
    WSF 16.5 .......................................................42
    WSL 1/4 .......................................................100
    WSL 1/8 .......................................................100
    WSL 10 AL ....................................................38
    WSL 10 NT .....................................................38
    WSL 10 T .......................................................39
    WSL 10 TR .....................................................39
    WSL 10 TRB ...................................................39
    WSL 14 AL .....................................................38
    WSL 14 NT .....................................................38
    WSL 14 T .......................................................39
    WSL 14 TR .....................................................39
    WSL 14 TRB ...................................................39
    WSL 20 AL ....................................................38
    WSL 20 JX AL ................................................38
    WSL 20 JX NT ................................................38
    WSL 20 NT ....................................................38
    WSL 20 T .......................................................39
    WSL 20 TR .....................................................39
    WSL 20 TRB ..................................................39
    WSL 30 AL .....................................................38
    WSL 30 JX AL ................................................38
    WSL 30 JX NT ................................................38
    WSL 30 NT .....................................................38
    WSL 30 T .......................................................39
    WSL 30 TR .....................................................39
    WSL 30 TRB ...................................................39
    WSL M5 .......................................................100
    WSL SH 10 .....................................................39
    WSL SH 14 .....................................................39
    WSL SH 20 .....................................................39
    WSL SH 30 .....................................................39
    WSS 1/4 X ...................................................100
    WSS 1/8 X ...................................................100
    WSS M5 L ......................................................41
    WSS M5 L ....................................................100
    WST 10 L .......................................................40
    WST 10 L-TR ..................................................40
    WST 10 X .......................................................40
    WST 10 X-TR .................................................40
    WST 14 X .......................................................40
    WST 14 X-TR .................................................40
    WST 20 JX .....................................................40
    WST 20 JX-TR ................................................40
    WST 20 X .......................................................40
    WST 20 X-TR .................................................40
    WST 30 JX .....................................................40
    WST 30 JX-TR ................................................40
    WST 30 X .......................................................40
    WST 30 X-TR ................................................40
    WSY 20 D ......................................................41
    X-25/25 .........................................................27
    X-50/25 .........................................................27
    YA-12-7 .......................................................112
    YA-12-7W ....................................................112
    YA-8-4 .........................................................112
    YP-06R ........................................................112
    YP-08R ........................................................112
    YP-10R ........................................................112
    YP-13R ........................................................112
    YP-16R ........................................................112
    YP-22R ........................................................112
    YP-30R ........................................................112
    YP-40R ........................................................112
    YPBE-10R ....................................................112
    YPBE-16R ....................................................112
    YPBE-20R ....................................................112
    ZTB 10 ...........................................................65
    ZTB 14 ...........................................................65
    ZTB 20 ...........................................................65
    ZTB 30 ...........................................................65
    ZTS 14 ...........................................................65
    ZTS 20-95 .....................................................65
    ZTS 20-95 C* .................................................65
    ZTS 30-95 .....................................................65

     

     

     

     

{转码词1},{转码词2},{转码词3},{转码词4}